This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Ferracane JL. Resin composite – state of the art. Dent Mater 2011;27(1):29-38.Search in Google Scholar
Szczesio-Wlodarczyk A, Sokolowski J, Kleczewska J, Bociong K. Ageing of dental composites based on methacrylate resins – a critical review of the causes and method of assessment. Polymers (Basel) 2020;12(4):882.Search in Google Scholar
Michailesco PM, Marciano J, Grieve AR, Abadie MJM. An in vivo recording of variations in oral temperature during meals: A pilot study. J Prosthet Dent 1995;73(2):214-8.Search in Google Scholar
Moore RJ, Watts JT, Hood JA, Burritt DJ. Intra-oral temperature variation over 24 hours. Eur J Orthod 1999;21(3):249-61.Search in Google Scholar
Mair LH. Surface permeability and degradation of dental composites resulting from oral temperature changes. Dent Mater 1989;5(4):247-55.Search in Google Scholar
Ferracane JL. Water sorption and solubility of experimental dental composites. American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 1997;38(2):116-7.Search in Google Scholar
Ferracane JL. Hygroscopic and hydrolytic effects in dental polymer networks. Dent Mater 2006;22(3):211-22.Search in Google Scholar
Bahbishi N, Mzain W, Badeeb B, Nassar HM. Color stability and micro-hardness of bulk-fill composite materials after exposure to common beverages. Materials (Basel) 2020;13(3):787.Search in Google Scholar
Chadwick RG. Thermocycling – the effects upon the compressive strength and abrasion resistance of three composite resins. J Oral Rehabil 1994;21(5):533-43.Search in Google Scholar
Morresi AL, D’Amario M, Capogreco M, Gatto R, Marzo G, D’Arcangelo C, et al. Thermal cycling for restorative materials: Does a standardized protocol exist in laboratory testing? A literature review. J Mech Behav Biomed Mater 2014;29:295-308.Search in Google Scholar
Tuncer S, Demirci M, Tiryaki M, Unlü N, Uysal Ö. The effect of a modeling resin and thermocycling on the surface hardness, roughness, and color of different resin composites. J Esthet Restor Dent 2013;25(6):404-19.Search in Google Scholar
D’Arcangelo C, Vanini L. Effect of three surface treatments on the adhesive properties of indirect composite restorations. J Adhes Dent 2007;9(3):319-26.Search in Google Scholar
Göhring TN, Gallo L, Lüthy H. Effect of water storage, thermocycling, the incorporation and site of placement of glass-fibers on the flexural strength of veneering composite. Dent Mater 2005;21(8):761-72.Search in Google Scholar
Catalbas B, Uysal T, Nur M, Demir A, Gunduz B. Effects of thermocycling on the degree of cure of two lingual retainer composites. Dent Mater J 2010;29(1):41-6.Search in Google Scholar
El-Araby AM, Talic YF. The effect of thermocycling on the adhesion of self-etching adhesives on dental enamel and dentin. J Contemp Dent Pract 2007;8(2):17-24.Search in Google Scholar
Rinastiti M, Özcan M, Siswomihardjo W, Busscher HJ. Effects of surface conditioning on repair bond strengths of non-aged and aged microhybrid, nanohybrid, and nanofilled composite resins. Clin Oral Investig 2011;15(5):625-33.Search in Google Scholar
Ayatollahi MR, Yahya MY, Karimzadeh A, Nikkhooyifar M, Ayob A. Effects of temperature change and beverage on mechanical and tribological properties of dental restorative composites. Mater Sci Eng C Mater Biol Appl 2015;54:69-75.Search in Google Scholar
Chung KH. Effects of finishing and polishing procedures on the surface texture of resin composites. Dent Mater 1994;10(5):325-30.Search in Google Scholar
Willems G, Lambrechts P, Braem M, Vuylsteke-Wauters M, Vanherle G. The surface roughness of enamel-to-enamel contact areas compared with the intrinsic roughness of dental resin composites. J Dent Res 1991;70(9):1299-305.Search in Google Scholar
Lu H, Roeder LB, Lei L, Powers JM. Effect of surface roughness on stain resistance of dental resin composites. J Esthet Restor Dent 2005;17(2):102-8.Search in Google Scholar
Quirynen M, Bollen CM. The influence of surface roughness and surface-free energy on supra-and subgingival plaque formation in man. A review of the literature. J Clin Periodontol 1995;22(1):1-14.Search in Google Scholar
Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater 1997;13(4):258-69.Search in Google Scholar
Hahnel S, Henrich A, Bürgers R, Handel G, Rosentritt M. Investigation of mechanical properties of modern dental composites after artificial aging for one year. Oper Dent 2010;35(4):412-9.Search in Google Scholar
Minami H, Hori S, Kurashige H, Murahara S, Muraguchi K, Minesaki Y, et al. Effects of thermal cycling on surface texture of restorative com-posite materials. Dent Mater J 2007;26(3):316-22.Search in Google Scholar
Tekçe N, Pala K, Tuncer S, Demirci M. The effect of surface sealant application and accelerated aging on posterior restorative surfaces: An SEM and AFM study. Dent Mater J 2017;36(2):182-9.Search in Google Scholar
Karadaş M, Demirbuğa S. Evaluation of color stability and surface roughness of bulk-fill resin composites and nanocomposites. Meandros Med Dent J 2017;18(3):199-205.Search in Google Scholar
Granat M, Cieloszyk J, Kowalska U, Buczkowska-Radlińska J, Łagocka R. Surface geometry of four conventional nanohybrid resin-based composites and four regular viscosity bulk fill resin-based composites after two-step polishing procedure. Biomed Res Int 2020;2020:6203053.Search in Google Scholar
Al-Saleh M, El-Mowafy O, Tam L, Fenton A. Microleakage of posterior composite restorations lined with self-adhesive resin cements. Oper Dent 2010;35(5):556-63.Search in Google Scholar
Duarte S Jr, Phark JH, Varjão FM, Sadan A. Nanoleakage, ultramorphological characteristics, and microtensile bond strengths of a new low-shrinkage composite to dentin after artificial aging. Dent Mater 2009;25(5):589-600.Search in Google Scholar
von Fraunhofer JA, Fagundes DK, McDonald NJ, Dumsha TC. The effect of root canal preparation on microleakage within endodontically treated teeth: an in vitro study. Int Endod J 2000;33(4):355-60.Search in Google Scholar
Amaral FLB, Colucci V, Palma-Dibb RG, Corona SAM. Assessment of in vitro methods used to promote adhesive interface degradation: a critical review. J Esthet Restor Dent 2007;19(6):340-53.Search in Google Scholar
Helvatjoglu-Antoniades M, Kalinderis K, Pedulu L, Papadogiannis Y. The effect of pulse activation on microleakage of a ‘packable’ compo-site resin and two ‘ormocers’. J Oral Rehabil 2004;31(11):1068-74.Search in Google Scholar
Kenshima S, Grande RHM, Singer J da M, Ballester RY. Effect of thermal cycling and filling technique on leakage of composite resin restorations. J App Oral Sci 2004;12(4):307-11.Search in Google Scholar
Stewardson DA, Shortall AC, Marquis PM. The effect of clinically relevant thermocycling on the flexural properties of endodontic post materials. J Dent 2010;38(5):437-42.Search in Google Scholar
Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999;27(2):89-99.Search in Google Scholar
Hatanaka K, Irie M, Tjandrawinata R, Suzuki K. Effect of thermocycling on interfacial gap-formation in Class V cavities and mechanical properties of spherical silica filler addition to resin-modified glass ionomer restorations. Dent Mater J 2006;25(4):655-63.Search in Google Scholar
Pala K, Tekçe N, Tuncer S, Serim ME, Demirci M. Evaluation of the surface hardness, roughness, gloss and color of composites after different finishing/polishing treatments and thermocycling using a multitechnique approach. Dent Mater J 2016;35(2):278-89.Search in Google Scholar
Aytac F, Karaarslan ES, Agaccioglu M, Tastan E, Buldur M, Kuyucu E. Effects of novel finishing and polishing systems on surface roughness and morphology of nanocomposites. J Esthet Restor Dent 2016;28(4):247-61.Search in Google Scholar
Barucci-Pfister N, Göhring TN. Subjective and objective perceptions of specular gloss and surface roughness of esthetic resin composites before and after artificial aging. Am J Dent 2009;22(2):102-10.Search in Google Scholar
Milleding P, Karlsson S, Nyborg L. On the surface elemental composition of noncorroded and corroded dental ceramic materials in vitro. J Mater Sci Mater Med 2003;14(6):557-66.Search in Google Scholar
Xu HHK, Eichmiller FC, Smith DT, Schumacher GE, Giuseppetti AA, Antonucci JM. Effect of thermal cycling on whisker-reinforced dental resin composites. J Mater Sci Mater Med 2002;13(9):875-83.Search in Google Scholar
Braem M, Finger W, Van Doren VE, Lambrechts P, Vanherle G. Mechanical properties and filler fraction of dental composites. Dent Mater 1989;5(5):346-8.Search in Google Scholar
Tanaka J, Inoue K, Masamura H, Matsumura K, Nakai H, Inoue K. The application of fluorinated aromatic dimethacrylates to experimental light-cured radiopaque composite resin, containing barium-borosilicate glass filler – a progress in nonwaterdegradable properties. Dent Mater J 1993;12(1):1-11.Search in Google Scholar
Htang A, Ohsawa M, Matsumoto H. Fatigue resistance of composite restorations: effect of filler content. Dent Mater 1995;11(1):7-13.Search in Google Scholar
Söderholm KJ. Filler leachability during water storage of six composite materials. Scand J Dent Res 1990;98(1):82-8.Search in Google Scholar
Söderholm KJ. Degradation of glass filler in experimental composites. J Dent Res 1981;60(11):1867-75.Search in Google Scholar
dos Santos PH, Consani S, Correr Sobrinho L, Coelho Sinhoreti MA. Effect of surface penetrating sealant on roughness of posterior composite resins. Am J Dent 2003;16(3):197-201.Search in Google Scholar
, 