[[1] ATKINSON J., The mechanics of soils and foundations, CRC Press, 2007.]Search in Google Scholar
[[2] BIENEN B., QIU G., PUCKER T., CPT correlation developed from numerical analysis to predict jack-up foundation penetration into sand overlying clay, Ocean Engineering, 2015, 108, 216-226, DOI: 10.1016/j.oceaneng.2015.08.009.10.1016/j.oceaneng.2015.08.009]Search in Google Scholar
[[3] CHEN X., ZHANG J., XIAO Y., LI J., Effect of roughness on shear behavior of red clay-concrete interface in large-scale direct shear tests, Canadian Geotechnical Journal, 2015, 52(8), 1122-1135, DOI: 10.1139/cgj-2014-0399.10.1139/cgj-2014-0399]Search in Google Scholar
[[4] CHIN F.K., Estimation of the ultimate load of piles not carried to failure, In 2nd Southeast Asia Conference on Soil Engineering, 11-15 June 1970, 81-90. Singapore: Southeast Asian Society of Soil Engineering.]Search in Google Scholar
[[5] Dassault Systémes, 2013. Abaqus 6.13 Analysis User’s Guide, Dassault Systèmes.]Search in Google Scholar
[[6] DOHERTY P., GAVIN K., Pile aging in cohesive soils, Journal of Geotechnical and Geoenvironmental Engineering, 2013, 139(9), 1620-1624, DOI: 10.1061/(ASCE)GT.1943-5606.0000884.10.1061/(ASCE)GT.1943-5606.0000884]Search in Google Scholar
[[7] GRABE J., HENKE S., PUCKER T., HAMANN T., CEL: simulations for soil plugging, screwed pile installation and deep vibration compaction, [in:] M.A. Hicks, J. Dijkstra, M. Lloret-Cabot, M. Karstunen (eds.), International Conference on Installation Effects in Geotechnical Engineering, (pp. 118-127). London: Taylor and Francis Group, 2013, DOI: 10.1201/b13890-19.10.1201/b13890-19]Search in Google Scholar
[[8] HAMANN T., QIU G., GRABE J., Application of a Coupled Eulerian- Lagrangian approach on pile installation problems under partially drained conditions, Computers and Geotechnics, 2015, 63, 279-290, DOI: 10.1016/j.compgeo.2014.10.006.10.1016/j.compgeo.2014.10.006]Search in Google Scholar
[[9] JIANGTAO Y., Centrifuge and Numerical Modelling of Sand Compaction Pile Installation, Phd Thesis, National University of Singapore, Singapore. 2009.]Search in Google Scholar
[[10] KOMURKA V.E., WAGNER A.B., EDIL T.B., A Review of Pile Set-Up, Proc., 51st Annual Geotechnical Engineering Conference 2003.]Search in Google Scholar
[[11] KONKOL J., Numerical estimation of the pile toe and shaft unit resistances during the installation process in sands, Studia Geotechnica et Mechanica, 2015, 37(1), 37-44, DOI: 10.1515/sgem-2015-000510.1515/sgem-2015-0005]Search in Google Scholar
[[12] KONKOL J., BAŁACHOWSKI L., Large deformation finite element analysis of undrained pile installation, Studia Geotechnica et Mechanica, 2016, 38(1), 45-54, DOI: 10.1515/sgem-2016-0005.10.1515/sgem-2016-0005]Search in Google Scholar
[[13] LARISCH M., Behaviour of stiff, fine-grained soil during the installation of screw auger displacement piles, Phd Thesis. University of Queensland, Queensland, Australia 2014.]Search in Google Scholar
[[14] LONG J., KERRIGAN J., WYSOCKEY M., Measured time effects for axial capacity of driven piling, Transportation Research Record: Journal of the Transportation Research Board, 1999, (1663), 8-15, DOI: 10.3141/1663-02.10.3141/1663-02]Search in Google Scholar
[[15] MABSOUT M.E., TASSOULAS J.L., A finite element model for the simulation of pile driving, International Journal for numerical methods in Engineering, 1994, 37(2), 257-278, DOI: 10.1002/nme.1620370206.10.1002/nme.1620370206]Search in Google Scholar
[[16] NOH W.F., CEL: a time-dependent, two-space-dimensional, coupled Eulerian-Lagrangian code, Lawrence Radiation Lab., Univ. of California, Livermore 1963.10.2172/4621975]Search in Google Scholar
[[17] QIU G., HENKE S., GRABE J., Application of a Coupled Eulerian- Lagrangian approach on geomechanical problems involving large deformations, Computers and Geotechnics, 2911, 38(1), 30-39, DOI: 10.1016/j.compgeo.2010.09.002.10.1016/j.compgeo.2010.09.002]Search in Google Scholar
[[18] RANDOLPH M.F., CARTER J.P., WROTH C.P., Driven piles in clay-the effects of installation and subsequent consolidation, Geotechnique, 1979, 29(4), 361-393, DOI: 10.1680/ geot.1979.29.4.361.10.1680/geot.1979.29.4.361]Search in Google Scholar
[[19] SCHMERTMANN J.H., The mechanical aging of soils, Journal of Geotechnical Engineering, 1991, 117(9), 1288-1330, DOI: 10.1061/(ASCE)0733-9410(1991)117:9(1288).10.1061/(ASCE)0733-9410(1991)117:9(1288)]Search in Google Scholar
[[20] TOMLINSON M., WOODWARD J., Pile design and construction practice, CRC Press 2014.10.1201/b17526]Search in Google Scholar
[[21] VARDANEGA P.J., BOLTON M.D., Stiffness of clays and silts: Normalizing shear modulus and shear strain, Journal of Geotechnical and Geoenvironmental Engineering, 2013, 139(9), 1575-1589, DOI: 10.1061/(ASCE)GT.1943-5606.0000887.10.1061/(ASCE)GT.1943-5606.0000887]Search in Google Scholar
[[22] WROTH C.P., The interpretation of in situ soil tests, Geotechnique, 1984, 34(4), 449-489, DOI: 10.1680/geot.1984.34.4.44910.1680/geot.1984.34.4.449]Search in Google Scholar