<abstract xmlns="http://www.w3.org/1999/xhtml"> Metal-ceramic and all-ceramic prosthetic restorations in the patient mouth are often damaged by esthetic and functional problems that reduce their success and longevity. Аim: To evaluate methods for testing mechanical characteristics of dental ceramics through analysis of different testing methods. Material and methods: Dental ceramic materials are tested with in vivo and in vitro methods for their most important mechanical characteristics: hardness, toughness, flexural strength and abrasion. In vitro testing methods are faster and more efficient, without subjective factors from the patient according to ISO standards. Testing is done with universal testing machines, like Zwick 1445, Universal Testing Machine (Zwick DmbH &amp; Co.KG, Ulm, Germany), Instron 4302 (Instron Corporation, England), MTS Sintech ReNew 1123 or in oral chewing simulators. Results: According to the testing results, flexure strength is one of the most important characteristic of the dental ceramic to be tested, by the uniaxial and biaxial tests. Uniaxial tests three-point and four-point flexure are not most appropriate because the main stress on the lower side of the tested specimens is tension that causes beginning fractures at the places with superficial flow. Uniaxial results for flexural strength are lower than actual force, while with biaxial test defects and flows on the edges of tested specimens are not directly loaded. Conclusion: Biaxial flexural method has advantages over uniaxial because of real strength results, but also for simple shape and preparing of the testing specimens.</abstract>

Metal-ceramic and all-ceramic prosthetic restorations in the patient mouth are often damaged by esthetic and functional problems that reduce their success and longevity. Аim: To evaluate methods for testing mechanical characteristics of dental ceramics through analysis of different testing methods. Material and methods: Dental ceramic materials are tested with in vivo and in vitro methods for their most important mechanical characteristics: hardness, toughness, flexural strength and abrasion. In vitro testing methods are faster and more efficient, without subjective factors from the patient according to ISO standards. Testing is done with universal testing machines, like Zwick 1445, Universal Testing Machine (Zwick DmbH & Co.KG, Ulm, Germany), Instron 4302 (Instron Corporation, England), MTS Sintech ReNew 1123 or in oral chewing simulators. Results: According to the testing results, flexure strength is one of the most important characteristic of the dental ceramic to be tested, by the uniaxial and biaxial tests. Uniaxial tests three-point and four-point flexure are not most appropriate because the main stress on the lower side of the tested specimens is tension that causes beginning fractures at the places with superficial flow. Uniaxial results for flexural strength are lower than actual force, while with biaxial test defects and flows on the edges of tested specimens are not directly loaded. Conclusion: Biaxial flexural method has advantages over uniaxial because of real strength results, but also for simple shape and preparing of the testing specimens.

Evaluation of Different in Vitro Testing Methods for Mechanical Properties of Veneer Ceramics/ Евалуација На Тестовите In Vitro За Одредување На Механичките Особини На Порцеланските Маси За Фасетирање

Faculty of Dentistry, St. Panteleimon P.H.O. Dental Clinical Centre, Department of Prosthodontics, Ss. Cyril and Methodius University, Skopje, R. Macedonia

PRILOZI

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Metal-ceramic and all-ceramic prosthetic restorations in the patient mouth are often damaged by esthetic and functional problems that reduce their success and...

Evaluation of Different in Vitro Testing Methods for Mechanical Properties of Veneer Ceramics/ Евалуација На Тестовите In Vitro За Одредување На Механичките Особини На Порцеланските Маси За Фасетирање

Pubblicato online: 16 giu 2015

Pagine: 225 - 230

DOI: https://doi.org/10.1515/prilozi-2015-0050

© 2015

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.