Assessment of a Boat Fractured Steering Wheel

1. Galvez Diaz-Rubio F., Cendon Franco D., Sanchez-Galvez V.: Fracture strength of welded aluminium joints in commercial road vehicles, Engineering Failure Analysis, Vol. 13, No 2, 2006; pp. 260-270.10.1016/j.engfailanal.2005.01.013Search in Google Scholar

2. Ktari A., Haddar N., Ayedi H.F.: Fatigue fracture expertise of train engine crankshafts, Engineering Failure Analysis, Vol, 18, No 3, 2011, pp. 1085-1093.10.1016/j.engfailanal.2011.02.007Search in Google Scholar

3. Fonte M., Reis L., Freitas M.: Failure analysis of a gear wheel of a marine azimuth thruster, Engineering Failure Analysis, Vol 18, No 7, 2011, pp. 1884-1888.10.1016/j.engfailanal.2011.07.009Search in Google Scholar

4. The Aluminum Association: International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys, The Aluminum Association, Arlington, USA, 2015.Search in Google Scholar

5. Braun R.: On the stress corrosion cracking behaviour of 6XXX series aluminium alloys, International Journal of Material Research, Vol. 101, No 5, 2010, pp. 657-668.10.3139/146.110314Search in Google Scholar

6. Kyzioł L.: Analysis of fracture toughness of modified timber, Polish Maritime Research, Vol. 17, No 4(67), 2010, pp. 59-63.10.2478/v10012-010-0037-9Search in Google Scholar

7. Noda N.A., Xu C.H.: Controlling parameter of the SIFs for a planar interfacial crack in three-dimensional bimaterials. International Journal of Solids and Structures, Vol. 45, 2008, pp. 1017-1031.10.1016/j.ijsolstr.2007.09.013Search in Google Scholar

8. Li J., Wang X., Tan C.L.: Weight functions for the determination of SIF and T-stress for edge-cracked plates with built-in ends. International Journal of Pressure Vessels and Piping, Vol. 81, 2004, pp. 285-296.10.1016/j.ijpvp.2003.12.013Search in Google Scholar

9. Morais A.B.. Calculation of SIFs by the force method. Engineering Fracture Mechanics Vol. 74, 2007, pp. 739-750.10.1016/j.engfracmech.2006.06.017Search in Google Scholar

10. Freese C.E., Baratta F.I.: Single edge-crack SIF solutions. Engineering Fracture Mechanics, Vol. 73, 2006, pp. 616-625.10.1016/j.engfracmech.2005.09.003Search in Google Scholar

11. Tada H., Paris P.C., Irwin G.R.: The stress analysis of crack handbook. 3rd ed. New York: ASME Press; 2000.10.1115/1.801535Search in Google Scholar

12. Chow W.T., Atluri S.N.. Fracture and fatigue analysis of curved or kinked cracks near fastener holes. Finite Element Analysis and Design, Vol. 23, 1996, pp. 91-100.10.1016/S0168-874X(96)80001-1Search in Google Scholar

13. Anand A., Sudev L.J., Lakshminarayana H.V.: Determination of SIF for a Crack Emanating From a Rivet Hole in a Plate using Displacement Extrapolation Method. Journal of Applied Sciences, Vol. 12, No. 10, 2012, 1020-1025.10.3923/jas.2012.1020.1025Search in Google Scholar

14. Chen Y.Z., Lin X.Y., Wang Z.X.: A semi-analytic solution for multiple curved cracks emanating from circular hole using singular integral equation. Applied Mathematical Computations, Vol. 213, No 2, 2009, pp. 389-404.10.1016/j.amc.2009.03.021Search in Google Scholar

15. Miao C., Wei Y., Yan X.: Interactions of two collinear circular hole cracks subjected to internal pressure. Applied Mathematical Computations, Vol. 223, 2013, pp. 216-224.10.1016/j.amc.2013.08.008Search in Google Scholar

16. Abdelmoula R., Semani K., Li J.: Analysis of cracks originating at the boundary of a circular hole in an infinite plate by using a new conformal mapping approach. Applied Mathematical Computations, Vol. 188, No 2, 2007, pp. 1891-1896.10.1016/j.amc.2006.11.052Search in Google Scholar

17. Guo J.H., Lu Z.X., Han H.T., Yang Z.: Exact solutions for anti-plane problem of two asymmetrical edge cracks emanating from an elliptical hole in a piezoelectric material. Internationa Journal of Solids and Structures, Vol. 46, No 21, 2009, pp. 3799-3809.10.1016/j.ijsolstr.2009.07.002Search in Google Scholar

18. [18] Boljanović S., Maksimović S.: Mixed mode crack growth simulation with/without overloads. International Journal of Fatigue, Vol. 67, 2014, pp. 183-190.10.1016/j.ijfatigue.2013.11.011Search in Google Scholar

19. Simionescu P.A., Talpasanu I.: Synthesis and analysis of the steering system of an adjustable tread-width four-wheel tractor. Mechanisms and Machine Theory, Vol. 42, No 5, 2007, pp. 526-540.10.1016/j.mechmachtheory.2006.06.001Search in Google Scholar

20. Altenhof W., Paonessa S., Zamani N., Gaspar R.: An experimental and finite element investigation into the energy absorption characteristics of a steering wheel armature in an impact. International Journal of Impact Engineering,Vol. 27, No. 2, 2002, pp. 197-21210.1016/S0734-743X(01)00038-0Search in Google Scholar

21. Mossey M.E. et al.: Evaluation of four steering wheels to determine driver hand placement in a static environment. Applied Ergonomics, Vol. 45, No 4, 2014, pp. 1187-1195.10.1016/j.apergo.2014.02.00824674782Search in Google Scholar

22. Cartwright, D.J., Ratcliffe, G.A.: Strain Energy Release Rate for Radial Cracks Emanating from a Pin Loaded Hole. International Journal of Fracture Mechanics, Vol. 8, No 2, 1972, pp. 175-181.10.1007/BF00703879Search in Google Scholar

23. Newman J.C., Yamada Y., James M.A.: Stress-intensityfactor equations for compact specimen subjected to concentrated forces, Engineering Fracture Mechanics, Vol. 77, No 6, 2010, pp. 1025-1029.10.1016/j.engfracmech.2010.02.012Search in Google Scholar

24. Huang W., Garbatov Y., Guedes Soares C.: Fatigue reliability assessment of a complex welded structure subjected to multiple cracks, Engineering Structures Vol. 56, 2013, pp. 868-879.10.1016/j.engstruct.2013.06.011Search in Google Scholar

25. Barsoum R.S.: On the use of isoparametric finite elements in linear fracture mechanics, International Journal for Numerical Methods in Engineering, Vol. 10, 1976, pp. 25-62.10.1002/nme.1620100103Search in Google Scholar