[1. Act No 185/2001 Coll., on waste (Czech waste Act).]Search in Google Scholar
[2. Decree of the Czech Ministry of the Environment No 415/2012 Coll., on permissible level of pollution and the discovery and implementation of certain other provisions of the Clean Air Act (emission regulation).]Search in Google Scholar
[3. Directive of the European Parliament and of the Council (EC) 76/2000, on incineration of waste.]Search in Google Scholar
[4. Directive of the European Parliament and of the Council (EU) 75/2010, on industrial emissions.]Search in Google Scholar
[5. Directive of the European Parliament and of the Council (EC) 98/2008, on waste.]Search in Google Scholar
[6. Bilitewski, B., Härdtle, G. & Marek, K. (1994). Waste Management. Berlin Heidelberg, Germany: Springer-Verlag. ISBN: 3-540-59210-5.]Search in Google Scholar
[7. Miyagoshi, Y., Tatefuku, T. & Nishino, M., et al. (2004). Advantageous effects of low air ratio combustion in an advanced stoker-type waste incinerator. Report from Second International Conference on Waste Management and the Environment, 29 September-1 October 2004 (pp. 155-164). Rhodos, Greece: Waste Management in Japan.]Search in Google Scholar
[8. Leskens, M., van Kessel, L.B.M. & Bosgra, O.H. (2005). Model predictive control as a tool for improving the process operation of MSW combustion plants. Waste Manag.25(8), 788-798. DOI: 10.1016/j.wasman.2005.03.005.10.1016/j.wasman.2005.03.00515896951]Search in Google Scholar
[9. Asthana, A., Menard, Y., Sessiecq, P. & Patisson, F. (2010). Modeling On-Grate MSW Incineration with Experimental Validation in a Batch Incinerator. Industrial & Engineering Chem. Res. 49(16), 7597-7604. DOI: 10.1021/ie100175e.10.1021/ie100175e]Search in Google Scholar
[10. Gebreegziabher, T., Oyedun, A.O., Lam, K.L., Lee, H.K.M. & Hui, C.W. (2012). Optimization of MSW Feed for Waste to Energy Practices. Report from 15th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, 25-29 August 2012 (pp. 679-684). Prague, Czech Republic: Chem. Engine. Transact. DOI: 10.3303/CET1229114.]Search in Google Scholar
[11. Van Kessel, L.B.M., Leskens, M. & Brem, G. (2002). On-line calorific value sensor and validation of dynamic models applied to municipal solid waste combustion. Transactions in IchemE 80(B5), 245-255, DOI: 10.1205/095758202762277605.10.1205/095758202762277605]Search in Google Scholar
[12. Pershing, D.W., Lighty, J.S., Silcox, G.D., Heap, M.P. & Owens, W.D. (2007). Solid waste incineration in rotary kilns. Comb. Sci. Technol. 93(1-6), 245-276. DOI: 10.1080/00102209308935292.10.1080/00102209308935292]Search in Google Scholar
[13. Obroučka, K. & Ferkovič, J. (2005). Optimization of batch production for waste incineration. Acta Metall.Slovaca, No 1, 251-257. ISSN 1335-1532. (in Czech).]Search in Google Scholar
[14. Byczanski, P. & Obroučka, K. (2007). The proposal of mathematical model to optimize the formation of mixtures of combustible waste for incineration. Chem. Pap. No 8, V. 101, 668−672. ISSN 1213-7103.]Search in Google Scholar
[15. Obroučka, K. et al. (2012). Report on the implementation of the project of Ministry of Industry and Trade, Permanent Prosperity No 2A-3TP1/087 solved in 2008-2011 Research on process technology and design optimization of incinerators for municipal waste, providing an increase in energy conversion efficiency. Final Report. I. part VŠB - TU Ostrava, Centre of environmental technologies. (in Czech).]Search in Google Scholar
[16. Fojtík, P. (2010). Specification of algorithm to optimize the furnace and the development of software components for visualizing the results of optimization process. (Program of waste storage in boxes.) Partial report on the project of Ministry of Industry and Trade No 2A-3TP1/087, VŠB - TU Ostrava. (in Czech)]Search in Google Scholar