<abstract xmlns="http://www.w3.org/1999/xhtml"> The hydrogen production by conversion of liquid compounds containing hydrogen was investigated experimentally. The waveguide-supplied metal cylinder-based microwave plasma source (MPS) operated at frequency of 915 MHz at atmospheric pressure was used. The decomposition of ethanol, isopropanol and kerosene was performed employing plasma dry reforming process. The liquid was introduced into the plasma in the form of vapour. The amount of vapour ranged from 0.4 to 2.4 kg/h. Carbon dioxide with the flow rate ranged from 1200 to 2700 NL/h was used as a working gas. The absorbed microwave power was up to 6 kW. The effect of absorbed microwave power, liquid composition, liquid flow rate and working gas fl ow rate was analysed. All these parameters have a clear influence on the hydrogen production efficiency, which was described with such parameters as the hydrogen production rate [NL(H2)/h] and the energy yield of hydrogen production [NL(H2)/kWh]. The best achieved experimental results showed that the hydrogen production rate was up to 1116 NL(H2)/h and the energy yield was 223 NL(H2) per kWh of absorbed microwave energy. The results were obtained in the case of isopropanol dry reforming. The presented catalyst-free microwave plasma method can be adapted for hydrogen production not only from ethanol, isopropanol and kerosene, but also from different other liquid compounds containing hydrogen, like gasoline, heavy oils and biofuels.</abstract>

The hydrogen production by conversion of liquid compounds containing hydrogen was investigated experimentally. The waveguide-supplied metal cylinder-based microwave plasma source (MPS) operated at frequency of 915 MHz at atmospheric pressure was used. The decomposition of ethanol, isopropanol and kerosene was performed employing plasma dry reforming process. The liquid was introduced into the plasma in the form of vapour. The amount of vapour ranged from 0.4 to 2.4 kg/h. Carbon dioxide with the flow rate ranged from 1200 to 2700 NL/h was used as a working gas. The absorbed microwave power was up to 6 kW. The effect of absorbed microwave power, liquid composition, liquid flow rate and working gas fl ow rate was analysed. All these parameters have a clear influence on the hydrogen production efficiency, which was described with such parameters as the hydrogen production rate [NL(H2)/h] and the energy yield of hydrogen production [NL(H2)/kWh]. The best achieved experimental results showed that the hydrogen production rate was up to 1116 NL(H2)/h and the energy yield was 223 NL(H2) per kWh of absorbed microwave energy. The results were obtained in the case of isopropanol dry reforming. The presented catalyst-free microwave plasma method can be adapted for hydrogen production not only from ethanol, isopropanol and kerosene, but also from different other liquid compounds containing hydrogen, like gasoline, heavy oils and biofuels.

Microwave plasma for hydrogen production from liquids

The Szewalski Institute of Fluid-Flow Machinery of the Polish Academy of Sciences, 14 Fiszera Str., 80-231 Gdańsk, Poland

Department of Marine Electronics, Gdynia Maritime University, 81-87 Morska Str., 81-225 Gdynia, Poland

Nukleonika

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Microwave plasma for hydrogen production from liquids"}

The hydrogen production by conversion of liquid compounds containing hydrogen was investigated experimentally. The waveguide-supplied metal cylinder-based...

Microwave plasma for hydrogen production from liquids

Pubblicato online: 15 giu 2016

Pagine: 185 - 190

Ricevuto: 25 set 2015

Accettato: 20 nov 2015

DOI: https://doi.org/10.1515/nuka-2016-0031

© by Dariusz Czylkowski

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.