Simulation and Optimization of Throttle Flowmeter with Inner-Outer Tube Element

[1] Schena, E., Massaroni, C., Saccomandi, P., Cecchini, S. (2015). Flow measurement in mechanical ventilation: A review. Medical Engineering & Physics, 37 (3), 257-264.10.1016/j.medengphy.2015.01.01025659299Search in Google Scholar

[2] Thorn, R., Johansen, G.A., Hjertaker, B.T. (2013). Three-phase flow measurement in the petroleum industry. Measurement Science and Technology, 24 (1), 12003-12019.10.1088/0957-0233/24/1/012003Search in Google Scholar

[3] Jiang, W., Zhang T., Xu, Y., et al. (2016). The effects of fluid viscosity on the orifice rotameter. Measurement Science Review, 16 (2), 87-95.10.1515/msr-2016-0012Search in Google Scholar

[4] Fincham, A.M., Spedding, G.R. (1997). Low cost, high resolution DPIV for measurement of turbulent fluid flow. Experiments in Fluids, 23 (6), 449-462.10.1007/s003480050135Search in Google Scholar

[5] Santi, P.M. (2014). Precision and accuracy in debrisflow volume measurement. Environmental & Engineering Geoscience, 20 (4), 349-359.10.2113/gseegeosci.20.4.349Search in Google Scholar

[6] Daev, Z.A. (2015). A comparative analysis of the discharge coefficients of variable pressure-drop flowmeters. Measurement Techniques, 58 (3), 323-326.10.1007/s11018-015-0708-0Search in Google Scholar

[7] Nukui, K., Komiya, K., Kagawa, T. (2009). Effect of temperature sensor position on differential pressure measurement in orifice type flowmeter. Journal of Clinical Psychopharmacology, 38 (3), 233-238.Search in Google Scholar

[8] Xu, L., Zhou, W., Li, X., et al. (2011). Wet-gas flow modeling for the straight section of throat-extended Venturi meter. IEEE Transactions on Instrumentation and Measurement, 60 (6), 2080-2087.Search in Google Scholar

[9] Nithin, T., Jain, N., Hiriyannaiah, A. (2012). Optimization of Venturi flow meter model for the angle of divergence with minimal pressure drop by computational fluid dynamics method. In International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies (ICCOMIM 2012), July 11-13, 2012, 658-670.Search in Google Scholar

[10] Wei, C., Tan, Ch., Dong, F. (2011). Numerical simulation and optimal design for cone flowmeter. Journal of Engineering Thermophysics, 32 (7), 1165-1168.Search in Google Scholar

[11] Daev, Zh.A. (2015). A comparative analysis of the discharge coefficients of variable pressure-drop flowmeters. Measurement Techniques, 58 (3), 323-326.10.1007/s11018-015-0708-0Search in Google Scholar

[12] Guo, S., Sun, L., Zhang, T., Yang, W., Yang, Z. (2013). Analysis of viscosity effect on turbine flowmeter performance based on experiments and CFD simulations. Flow Measurement & Instrumentation, 34 (5), 42-52.10.1016/j.flowmeasinst.2013.07.016Search in Google Scholar

[13] Sleigh, A. (2009). Real fluids - Pressure loss during laminar flow in a pipe. University of Leeds, UK, http://www.efm.leeds.ac.uk/CIVE/CIVE1400/Section4/laminar_turbulent.htm.Search in Google Scholar

[14] Mihailovic, D.T., Gualtieri, C. (Editors) (2010). Advances in Environmental Fluid Mechanics. World Scientific Publishing Company, ISBN 978-981-4465-97-7.10.1142/7575Search in Google Scholar

[15] Thorel, L., Gaudin, C., Rault, G., Garnier, J., Favraud, C. (2007). A cone pressuremeter for soil characterisation in the centrifuge. International Journal of Physical Modelling in Geotechnics, 7 (1), 25-32.10.1680/ijpmg.2007.070103Search in Google Scholar

[16] Xu, Y., Chen, W., Zhang, T., Liu, W. (2015). Study on applicability of turbulence model for V-cone flowmeter with double support. Chinese Journal of Scientific Instrument, 36 (2), 459-465.Search in Google Scholar