<abstract xmlns="http://www.w3.org/1999/xhtml"> Cuprous oxide, a narrow bandgap p-type semiconductor, has been known as a potential material for applications in supercapacitors, hydrogen production, sensors, and energy conversion due to its properties such as non-toxicity, easy availability, cost effectiveness, high absorption coefficient in the visible region and large minority carriers diffusion length. In this study, Cu2O nanostructured thin film was fabricated by anodizing of Cu plates in ethylene glycol containing 0.15 M KOH, 0.1 M NH4F and 3 wt.% deionized water. The effects of anodizing voltage and temperature of electrolyte were investigated and reported. It was found that nanoporous Cu2O thin film was formed when anodizing voltages of 50 V and 70 V were used while a dense Cu2O thin film was formed due to the aggregation of smaller nanoparticles when 30 V anodizing voltage was used. Nanoplatelets thin film was formed when the temperature of electrolyte was reduced to 15 °C and 5 °C. X-ray diffraction confirmed the presence of Cu2O phase in thin film formed during anodizing of Cu plates, regardless of the anodizing voltage and temperature of electrolyte. Photoluminescence spectroscopy showed the presence of Cu2O peak at 630 nm corresponding to band gap of 1.97 eV. A mechanism of the formation of Cu2O thin film was proposed. This study reported the ease of tailoring Cu2O nanostructures of different morphologies using anodizing that may help widen the applications of this material</abstract>

Cuprous oxide, a narrow bandgap p-type semiconductor, has been known as a potential material for applications in supercapacitors, hydrogen production, sensors, and energy conversion due to its properties such as non-toxicity, easy availability, cost effectiveness, high absorption coefficient in the visible region and large minority carriers diffusion length. In this study, Cu2O nanostructured thin film was fabricated by anodizing of Cu plates in ethylene glycol containing 0.15 M KOH, 0.1 M NH4F and 3 wt.% deionized water. The effects of anodizing voltage and temperature of electrolyte were investigated and reported. It was found that nanoporous Cu2O thin film was formed when anodizing voltages of 50 V and 70 V were used while a dense Cu2O thin film was formed due to the aggregation of smaller nanoparticles when 30 V anodizing voltage was used. Nanoplatelets thin film was formed when the temperature of electrolyte was reduced to 15 °C and 5 °C. X-ray diffraction confirmed the presence of Cu2O phase in thin film formed during anodizing of Cu plates, regardless of the anodizing voltage and temperature of electrolyte. Photoluminescence spectroscopy showed the presence of Cu2O peak at 630 nm corresponding to band gap of 1.97 eV. A mechanism of the formation of Cu2O thin film was proposed. This study reported the ease of tailoring Cu2O nanostructures of different morphologies using anodizing that may help widen the applications of this material

Fabrication of Cu2O Nanostructured Thin Film by Anodizing

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Fabrication of CuO Nanostructured Thin Film by Anodizing

Cuprous oxide, a narrow bandgap p-type semiconductor, has been known as a potential material for applications in supercapacitors, hydrogen production, sensors,...

Fabrication of Cu₂O Nanostructured Thin Film by Anodizing

Pubblicato online: 25 giu 2018

Pagine: 209 - 216

Ricevuto: 18 lug 2017

Accettato: 20 mar 2018

DOI: https://doi.org/10.1515/msp-2018-0035

Parole chiave
anodizing, cuprous oxide, nanopores, nanoplatelets, thin film

© 2018 C.H. Voon et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Fabrication of Cu2O Nanostructured Thin Film by Anodizing

Pubblicato online: 25 giu 2018

Pagine: 209 - 216

Ricevuto: 18 lug 2017

Accettato: 20 mar 2018

DOI: https://doi.org/10.1515/msp-2018-0035

Parole chiaveanodizing, cuprous oxide, nanopores, nanoplatelets, thin film

© 2018 C.H. Voon et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Fabrication of Cu₂O Nanostructured Thin Film by Anodizing

Parole chiave
anodizing, cuprous oxide, nanopores, nanoplatelets, thin film