<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Measuring the in-depth stress state is of vital importance for materials scientists. Strain gauges methods are capable of yielding information only about the surface stress state. Diffraction methods using synchrotron or neutron radiation, which allow totally non-destructive stress measurements inside the material, are not widely available. In this context, the best widely available method combines the X-ray diffraction stress measurements and gradual removal of the outer layer by means of electropolishing. Here, this method was applied to the specimen made of 1H13 stainless steel cut with under water on a corundum cut-off wheel. The idea was to investigate how deeply an additional stress state resulting from cutting was introduced and whether the technique of combining of X-ray diffractometry and electropolishing can be used widely for determining the stress state inside the specimen.</p></abstract>

Measuring the in-depth stress state is of vital importance for materials scientists. Strain gauges methods are capable of yielding information only about the surface stress state. Diffraction methods using synchrotron or neutron radiation, which allow totally non-destructive stress measurements inside the material, are not widely available. In this context, the best widely available method combines the X-ray diffraction stress measurements and gradual removal of the outer layer by means of electropolishing. Here, this method was applied to the specimen made of 1H13 stainless steel cut with under water on a corundum cut-off wheel. The idea was to investigate how deeply an additional stress state resulting from cutting was introduced and whether the technique of combining of X-ray diffractometry and electropolishing can be used widely for determining the stress state inside the specimen.

The In-Depth Stress Distribution for 1H13 Specimen after Cutting

Fatigue of Aircraft Structures

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"The In-Depth Stress Distribution for 1H13 Specimen after Cutting"}

Measuring the in-depth stress state is of vital importance for materials scientists. Strain gauges methods are capable of yielding information only about the...

The In-Depth Stress Distribution for 1H13 Specimen after Cutting

Pubblicato online: 22 lug 2017

Pagine: 73 - 79

DOI: https://doi.org/10.1515/fas-2016-0005

Parole chiave
In-Depth stress distribution, Electropolishing, Diffraction methods, 1H13 stainless steel

© 2016 Elżbieta Gadalińska et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The In-Depth Stress Distribution for 1H13 Specimen after Cutting

Pubblicato online: 22 lug 2017

Pagine: 73 - 79

DOI: https://doi.org/10.1515/fas-2016-0005

Parole chiaveIn-Depth stress distribution, Electropolishing, Diffraction methods, 1H13 stainless steel

© 2016 Elżbieta Gadalińska et al., published by De Gruyter Open

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
In-Depth stress distribution, Electropolishing, Diffraction methods, 1H13 stainless steel