<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The paper focuses on the analysis of compliance with the technological discipline in silage quality assessment based on sampling the silage wall using thermal imaging and penetrometer method for silage compaction. Experimental measurements were done in a selected company, which has built a silage trough with a capacity of 6,624 m<sup>3</sup>, in which the maize (hybrid KWS – KALIFF FAO 440) with a 36% solids content was ensiled. A thermal camera ThermoPro TM TP8S IR and cone penetrometer Eijkelkamp were used for measurements. The results obtained suggest that also undesirable heating was found in the sampling area, since the maximum temperature at some places in the depth of 0.5 m reached a temperature of 36.4 °C. According to regression and correlation analysis, we found direct linear relationship between penetration resistance and penetration depth in a 6 m and 1.5 m height (<italic>R</italic> = 0.938 respectively <italic>R</italic> = 0.970).</p></abstract>

The paper focuses on the analysis of compliance with the technological discipline in silage quality assessment based on sampling the silage wall using thermal imaging and penetrometer method for silage compaction. Experimental measurements were done in a selected company, which has built a silage trough with a capacity of 6,624 m3, in which the maize (hybrid KWS – KALIFF FAO 440) with a 36% solids content was ensiled. A thermal camera ThermoPro TM TP8S IR and cone penetrometer Eijkelkamp were used for measurements. The results obtained suggest that also undesirable heating was found in the sampling area, since the maximum temperature at some places in the depth of 0.5 m reached a temperature of 36.4 °C. According to regression and correlation analysis, we found direct linear relationship between penetration resistance and penetration depth in a 6 m and 1.5 m height (R = 0.938 respectively R = 0.970).

Using Modern Diagnostic Methods for Technological Discipline Assessment of Maize Silage

Slovak University of Agriculture in Nitra, Slovak Republic

Acta Technologica Agriculturae

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper focuses on the analysis of compliance with the technological discipline in silage quality assessment based on sampling the silage wall using thermal...

Using Modern Diagnostic Methods for Technological Discipline Assessment of Maize Silage

Pubblicato online: 11 giu 2016

Pagine: 39 - 42

DOI: https://doi.org/10.1515/ata-2016-0009

Parole chiave
maize silage, penetration resistance, compaction, thermography, heating

© 2016 Slovak University of Agriculture in Nitra

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Using Modern Diagnostic Methods for Technological Discipline Assessment of Maize Silage

Pubblicato online: 11 giu 2016

Pagine: 39 - 42

DOI: https://doi.org/10.1515/ata-2016-0009

Parole chiavemaize silage, penetration resistance, compaction, thermography, heating

© 2016 Slovak University of Agriculture in Nitra

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
maize silage, penetration resistance, compaction, thermography, heating