Study of Selected Properties of Thermally Sprayed Coatings Containing WC and WB Hard Particles

The paper presents results of research of the essential characteristics of two kinds of advanced coatings applied by HVOF technology. One studied coating: WB-WC-Co (60-30-10%) contains two types of hard particles (WC and WB), the second coating is eco-friendly alternative to the previously used WC-based coatings, called “green carbides” with the composition WC-FeCrAl (85-15%). In green carbides coating the heavy metals (Co, Ni, NiCr) forming the binding matrix in conventional wear-resistant coatings are replaced by more environmentally friendly matrix based on FeCrAl alloy. On the coatings was carried out: metallographic analysis, measurement of thickness, micro-hardness, adhesion, resistance to thermal cyclic loading and adhesive wear resistance (pin-on-disk test). One thermal cycle consisted of heating the coatings to 600°C, dwell for 10 minutes, and subsequently cooling on the still air. The number of thermal cycles: 10. The base material was stainless steel AISI 316L, pretreatment prior to application of the coating: blasting with white corundum, application device JP-5000.