<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The article presents the methodology of testing sliding bearings with a flexible shell, focusing on the issue of temperature increase during experiments for a specific time interval of the START-STOP test cycle. Selected material pairs, used in previous studies, were used in the experiment. The stand used for tests in the start-stop cycle was developed under the project POIG.01.03.01-00-027 / 08-00 at the Faculty of Technical Sciences UWM in Olsztyn.</p></abstract>

The article presents the methodology of testing sliding bearings with a flexible shell, focusing on the issue of temperature increase during experiments for a specific time interval of the START-STOP test cycle. Selected material pairs, used in previous studies, were used in the experiment. The stand used for tests in the start-stop cycle was developed under the project POIG.01.03.01-00-027 / 08-00 at the Faculty of Technical Sciences UWM in Olsztyn.

Methodology of Testing Foil Bearings in the Start-Stop Cycle in the Presence of a Working Medium - Stabilization of Temperature in the Test Chamber

University of Warmia and Mazury in Olsztyn

Agricultural Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The article presents the methodology of testing sliding bearings with a flexible shell, focusing on the issue of temperature increase during experiments for a...

Methodology of Testing Foil Bearings in the Start-Stop Cycle in the Presence of a Working Medium - Stabilization of Temperature in the Test Chamber

Pubblicato online: 30 set 2020

Pagine: 63 - 72

Ricevuto: 01 ago 2020

Accettato: 01 set 2020

DOI: https://doi.org/10.1515/agriceng-2020-0027

Parole chiave
foil bearings, start-stop tests, low-boiling medium

© 2020 Bartosz Moczulak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Methodology of Testing Foil Bearings in the Start-Stop Cycle in the Presence of a Working Medium - Stabilization of Temperature in the Test Chamber

Pubblicato online: 30 set 2020

Pagine: 63 - 72

Ricevuto: 01 ago 2020

Accettato: 01 set 2020

DOI: https://doi.org/10.1515/agriceng-2020-0027

Parole chiavefoil bearings, start-stop tests, low-boiling medium

© 2020 Bartosz Moczulak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
foil bearings, start-stop tests, low-boiling medium