<abstract xmlns="http://www.w3.org/1999/xhtml">The objective of the paper was to determine the level of circumferential stress in a wall of an open milk tank and to assess the tank wall degree of utilization according to the FKM Guideline calculation algorithm − Analytical Strength Assessment of Components, Made of Steel Cast Iron and Aluminium Materials in Mechanical Engineering. (German: FKM – Forschungskuratorium für Maschinenbau). The stress level in the tank wall was determined based on analytical calculations and numerical method using the FEA – Finite Elements Analysis. Numerical calculations were made in FEMAP with NX NASTRAN Solver (NASTRAN – NASA Structure Analysis). Similar stress values were found using two independent calculation methods. The difference between obtained stress values does not exceed 2%. Based on the FKM algorithm, the safety factor jges = 1.4 and static capacity of the tank wall ask = 19.7% were calculated.</abstract>

The objective of the paper was to determine the level of circumferential stress in a wall of an open milk tank and to assess the tank wall degree of utilization according to the FKM Guideline calculation algorithm − Analytical Strength Assessment of Components, Made of Steel Cast Iron and Aluminium Materials in Mechanical Engineering. (German: FKM – Forschungskuratorium für Maschinenbau). The stress level in the tank wall was determined based on analytical calculations and numerical method using the FEA – Finite Elements Analysis. Numerical calculations were made in FEMAP with NX NASTRAN Solver (NASTRAN – NASA Structure Analysis). Similar stress values were found using two independent calculation methods. The difference between obtained stress values does not exceed 2%. Based on the FKM algorithm, the safety factor jges = 1.4 and static capacity of the tank wall ask = 19.7% were calculated.

Application of FKM Calculation Algorithm for Determination of Degree of Utilization of A Milk Tank Wall

Wroclaw University of Environmental and Life Sciences

Agricultural Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The objective of the paper was to determine the level of circumferential stress in a wall of an open milk tank and to assess the tank wall degree of...

Application of FKM Calculation Algorithm for Determination of Degree of Utilization of A Milk Tank Wall

Pubblicato online: 25 gen 2019

Pagine: 33 - 41

Ricevuto: 01 nov 2018

Accettato: 01 dic 2018

DOI: https://doi.org/10.1515/agriceng-2018-0034

Parole chiave
milk, cooling tank, tank, degree of utilization, FKM Guideline, safety factor

© 2018 Krzysztof Lejman et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Application of FKM Calculation Algorithm for Determination of Degree of Utilization of A Milk Tank Wall

Pubblicato online: 25 gen 2019

Pagine: 33 - 41

Ricevuto: 01 nov 2018

Accettato: 01 dic 2018

DOI: https://doi.org/10.1515/agriceng-2018-0034

Parole chiavemilk, cooling tank, tank, degree of utilization, FKM Guideline, safety factor

© 2018 Krzysztof Lejman et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Parole chiave
milk, cooling tank, tank, degree of utilization, FKM Guideline, safety factor