Acta Mechanica et Automatica's Cover Image
Accès libre

Acta Mechanica et Automatica

Édition 12 (2018): Edition 2 (Juin 2018)

Télécharger la couverture
L'édition précédente
La prochaine édition
13 Articles
Accès libre | 17 juil. 2018
Combined Bending with Tension of Isotropic Plate with Crack Considering Crack Banks Contact and Plastic Zones at its Tops
Heorgij Sulym

Heorgij Sulym

Department of Mechanics and Applied Computer Science Application, Faculty of Mechanical Engineering, Bialystok University of TechnologyBialystok, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Sulym, Heorgij
, 
Viktor Opanasovych

Viktor Opanasovych

Faculty of Mechanics and Mathematics, Department of Mechanics, The Ivan Franko National University of LvivLviv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Opanasovych, Viktor
, 
Mykola Slobodian

Mykola Slobodian

Faculty of Mechanics and Mathematics, Department of Mechanics, The Ivan Franko National University of LvivLviv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Slobodian, Mykola
 et 
Oksana Bilash

Oksana Bilash

Faculty Training Specialists Battle (Operational) Software, Department of Engineering Mechanics (Weapons and Equipment of Military Engineering Forces), Hetman Petro Sahaidachnyi National Army AcademyLviv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Bilash, Oksana
  
Accès libre | 17 juil. 2018
Magnetorheological Self-Powered Vibration Reduction System with Current Cut-Off: Experimental Investigation
Łukasz Jastrzębski

Łukasz Jastrzębski

AGH University of Science and Technology, Mechanical Engineering and Robotics, Department of Process ControlKraków, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Jastrzębski, Łukasz
 et 
Bogdan Sapiński

Bogdan Sapiński

AGH University of Science and Technology, Mechanical Engineering and Robotics, Department of Process ControlKraków, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Sapiński, Bogdan
  
Accès libre | 17 juil. 2018
Digital Image Correlation Technique as a Tool for Kinematics Assessment of Structural Components
Adam Brodecki

Adam Brodecki

Centre for Material Testing, Motor Transport InstituteWarszawa, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Brodecki, Adam
, 
Tadeusz Szymczak

Tadeusz Szymczak

Centre for Material Testing, Motor Transport InstituteWarszawa, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Szymczak, Tadeusz
 et 
Zbigniew Kowalewski

Zbigniew Kowalewski

Department of Experimental Mechanics, Institute of Fundamental Technological ResearchWarszawa, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Kowalewski, Zbigniew
  
Accès libre | 17 juil. 2018
Mechanical Behaviour and Phase Transition Mechanisms of a Shape Memory Alloy by Means of a Novel Analytical Model
Andrea Carpinteri

Andrea Carpinteri

Department of Engineering and Architecture, University of ParmaParma, Italy
Recherchez cet auteur sur
Sciendo|Google Scholar
Carpinteri, Andrea
, 
Vittorio Di Cocco

Vittorio Di Cocco

Department of Civil and Mechanical Engineering, University of Cassino and Lazio MeridionaleItaly
Recherchez cet auteur sur
Sciendo|Google Scholar
Di Cocco, Vittorio
, 
Giovanni Fortese

Giovanni Fortese

Department of Engineering and Architecture, University of ParmaParma, Italy
Recherchez cet auteur sur
Sciendo|Google Scholar
Fortese, Giovanni
, 
Francesco Iacoviello

Francesco Iacoviello

Department of Civil and Mechanical Engineering, University of Cassino and Lazio MeridionaleItaly
Recherchez cet auteur sur
Sciendo|Google Scholar
Iacoviello, Francesco
, 
Stefano Natali

Stefano Natali

Department Chemical Engineering Materials Environment, University of Roma “La Sapienza”Rome, Italy
Recherchez cet auteur sur
Sciendo|Google Scholar
Natali, Stefano
, 
Camilla Ronchei

Camilla Ronchei

Department of Engineering and Architecture, University of ParmaParma, Italy
Recherchez cet auteur sur
Sciendo|Google Scholar
Ronchei, Camilla
, 
Daniela Scorza

Daniela Scorza

Department of Engineering and Architecture, University of ParmaParma, Italy
Recherchez cet auteur sur
Sciendo|Google Scholar
Scorza, Daniela
, 
Sabrina Vantadori

Sabrina Vantadori

Department of Engineering and Architecture, University of ParmaParma, Italy
Recherchez cet auteur sur
Sciendo|Google Scholar
Vantadori, Sabrina
 et 
Andrea Zanichelli

Andrea Zanichelli

Department of Engineering and Architecture, University of ParmaParma, Italy
Recherchez cet auteur sur
Sciendo|Google Scholar
Zanichelli, Andrea
  
Accès libre | 17 juil. 2018
On 3D Anticrack Problem of Thermoelectroelasticity
Andrzej Kaczyński

Andrzej Kaczyński

Faculty of Mathematics and Information Science, Warsaw University of TechnologyWarsaw,
Recherchez cet auteur sur
Sciendo|Google Scholar
Kaczyński, Andrzej
  
Accès libre | 17 juil. 2018
Butt Welding of Round Drive Belts
Krzysztof Wałęsa

Krzysztof Wałęsa

Faculty of Machines and Transportation, Chair of Basics of Machine Design, Poznań University of TechnologyPoznań, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Wałęsa, Krzysztof
, 
Ireneusz Malujda

Ireneusz Malujda

Faculty of Machines and Transportation, Chair of Basics of Machine Design, Poznań University of TechnologyPoznań, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Malujda, Ireneusz
 et 
Krzysztof Talaśka

Krzysztof Talaśka

Faculty of Machines and Transportation, Chair of Basics of Machine Design, Poznań University of TechnologyPoznań, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Talaśka, Krzysztof
  
Accès libre | 17 juil. 2018
Dynamic Analysis of a Rod Vibro-Impact System with Intermediate Supports
Volodymyr Gursky

Volodymyr Gursky

Department of Mechanics and Automation Engineering, Institute of Engineering Mechanics and Transport, Lviv Polytechnic National UniversityLviv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Gursky, Volodymyr
 et 
Igor Kuzio

Igor Kuzio

Department of Mechanics and Automation Engineering, Institute of Engineering Mechanics and Transport, Lviv Polytechnic National UniversityLviv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Kuzio, Igor
  
Accès libre | 17 juil. 2018
Electronic Speckle Pattern Interferometry for Vibrational Analysis of Cutting Tools
Piotr Mrozek

Piotr Mrozek

Faculty of Mechanical Engineering, Department of Materials and Production Engineering, Bialystok University of TechnologyBialystok, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Mrozek, Piotr
, 
Ewa Mrozek

Ewa Mrozek

Faculty of Mechanical Engineering, Department of Mechanics and Applied Computer Science, Bialystok University of TechnologyBialystok, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Mrozek, Ewa
 et 
Andrzej Werner

Andrzej Werner

Faculty of Mechanical Engineering, Department of Materials and Production Engineering, Bialystok University of TechnologyBialystok, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Werner, Andrzej
  
Accès libre | 17 juil. 2018
Numerical Simulation and Experimental Testing of Topologically Optimized PLA Cervical Implants Made by Additive Manufacturing Methodics
Jozef Živčák

Jozef Živčák

Faculty of Mechanical Engineering, Department of Biomedical Engineering, Technical University of KošiceKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Živčák, Jozef
, 
Radovan Hudák

Radovan Hudák

Faculty of Mechanical Engineering, Department of Biomedical Engineering, Technical University of KošiceKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Hudák, Radovan
, 
Marek Schnitzer

Marek Schnitzer

Faculty of Mechanical Engineering, Department of Biomedical Engineering, Technical University of KošiceKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Schnitzer, Marek
 et 
Tomáš Kula

Tomáš Kula

Faculty of Mechanical Engineering, Department of Applied Mechanics and Mechanical Engineering, Technical University of KošiceKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Kula, Tomáš
  
Accès libre | 17 juil. 2018
Investigation of Fracture Process of S355JR Steel in Transition Region Using Metallographic and Fractographic Tests and Numerical Analysis
Ihor Dzioba

Ihor Dzioba

Faculty of Mechatronics and Mechanical Engineering, Department of Machine Design, Kielce University of TechnologyKielce, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Dzioba, Ihor
, 
Sebastian Lipiec

Sebastian Lipiec

Faculty of Mechatronics and Mechanical Engineering, Department of Machine Design, Kielce University of TechnologyKielce, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Lipiec, Sebastian
, 
Piotr Furmanczyk

Piotr Furmanczyk

Faculty of Mechatronics and Mechanical Engineering, Department of Metal Science and Manufacturing Processes, Kielce University of TechnologyKielce, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Furmanczyk, Piotr
 et 
Robert Pala

Robert Pala

Faculty of Mechatronics and Mechanical Engineering, Department of Machine Design, Kielce University of TechnologyKielce, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Pala, Robert
  
Accès libre | 17 juil. 2018
Genetic Algorithm for Mobile Robot Route Planning with Obstacle Avoidance
Konrad K. Kwaśniewski

Konrad K. Kwaśniewski

Faculty of Mechanical Engineering, Bialystok University of TechnologyBialystok, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Kwaśniewski, Konrad K.
 et 
Zdzisław Gosiewski

Zdzisław Gosiewski

Faculty of Mechanical Engineering, Bialystok University of TechnologyBialystok, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Gosiewski, Zdzisław
  
Accès libre | 17 juil. 2018
The Closest Incomplete Distributed Information System for Medical Query Answering System
Katarzyna Ignatiuk

Katarzyna Ignatiuk

Department of Biomechanics and Biomedical Engineering, Bialystok University of TechnologyBiałystok, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Ignatiuk, Katarzyna
 et 
Agnieszka Dardzińska

Agnieszka Dardzińska

Department of Biomechanics and Biomedical Engineering, Bialystok University of TechnologyBiałystok, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Dardzińska, Agnieszka
  
Accès libre | 17 juil. 2018
The Impact of Non-Parallelism of Toothed Gear Shafts Axes and Method of Gear Fixing on Gearbox Components Vibrations
Grzegorz Wojnar

Grzegorz Wojnar

Faculty of Transport, Silesian University of TechnologyKatowice, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Wojnar, Grzegorz
 et 
Michał Juzek

Michał Juzek

Faculty of Transport, Silesian University of TechnologyKatowice, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Juzek, Michał
  

Chercher

Tous les volumes et éditions dans cette revue

Langue:
Anglais
Périodicité:
4 fois par an
Sujets de la revue:
Ingénierie, Ingénierie électrique, Électronique, Génie mécanique, Mécanique, Génie biologique et génie biomédicale, Biomécanique, Travaux publiques, Génie de l'environnement
RSS Feed de la revue