1. bookVolume 10 (2010): Edition 4 (August 2010)
Détails du magazine
License
Format
Magazine
eISSN
1335-8871
Première parution
07 Mar 2008
Périodicité
6 fois par an
Langues
Anglais
Accès libre

Probing System Characteristics in Coordinate Metrology

Publié en ligne: 28 Oct 2010
Volume & Edition: Volume 10 (2010) - Edition 4 (August 2010)
Pages: 120 - 129
Détails du magazine
License
Format
Magazine
eISSN
1335-8871
Première parution
07 Mar 2008
Périodicité
6 fois par an
Langues
Anglais

Weckenmann, A., Estler, T., Peggs, G., McMurtry, D. (2004). Probing systems in dimensional metrology. CIRP Annals-Manufacturing Technology, 53 (2), 657-684.10.1016/S0007-8506(07)60034-1Search in Google Scholar

Woźniak, A., Dobosz, M. (2005). Influence of measured objects parameters on CMM touch trigger probe accuracy of probing. Precision Engineering, 29 (3), 290-297.10.1016/j.precisioneng.2004.11.009Search in Google Scholar

Woźniak, A., Mayer, J. R. R., Bałaziński, M. (2009). Stylus tip envelop method: corrected measured point determination in high definition coordinate metrolog. Int. Journal of Advanced Manufacturing Technology, 42, 505-514.10.1007/s00170-008-1615-1Search in Google Scholar

Wu, Y., Liu, S., Zhang, G. (2004). Improvement of coordinate measuring machine probing accessibility. Precision Engineering, 28 (1), 89-94.10.1016/S0141-6359(03)00080-1Search in Google Scholar

Park, J.-J., Kwon, K., Cho, N. (2006). Development of a coordinate measuring machine (CMM) touch probe using a multi-axis force sensor. Measurement Science and Technology, 17, 2380-2386.10.1088/0957-0233/17/9/002Search in Google Scholar

Hermann, G. (2007). Geometric error correction in coordinate measurement. Acta Polytechnica Hungarica, 4 (1), 47-62.Search in Google Scholar

Schwenke, H., Knapp, W., Haitjema, H., Weckenmann, A., Schmitt, R., Delbressine, F. (2008). Geometric error measurement and compensation of machines-an update. CIRP Annals-Manufacturing Technology, 57, 660-675.10.1016/j.cirp.2008.09.008Search in Google Scholar

Genest, D. H. (1997). The right probe system adds versatility to CMMs. Quality Digest, http://www.qualitydigest.com/jan97/probes.html http://www.qualitydigest.com/jan97/probes.htmlSearch in Google Scholar

Dobosz, M., Woźniak, A. (2005). CMM touch trigger probes testing using a reference axis. Precision Engineering, 29 (3), 281-289.10.1016/j.precisioneng.2004.11.008Search in Google Scholar

Zeiss Calypso Navigator (2004). CMM Operation Instructions and Training Manual. Revision 4.0. Oberkochen, Germany: Carl Zeiss Co.Search in Google Scholar

Ali, S. H. R. (2008) The Influence of fitting algorithm and scanning speed on roundness error for 50 mm standard ring measurement using CMM. Journal of Metrology & Measurement Systems, 15 (1), 31-53.Search in Google Scholar

Kasparaitis, A., Šukys, A. (2006). Dynamic errors of CMM probes. Solid State Phenomena: Mechatronic Systems and Materials, 113, 477-482.10.4028/www.scientific.net/SSP.113.477Search in Google Scholar

Ali, S. H.R, Mohamed, H. H., Bedewy, M. K. (2009). Identifying cylinder liner wear using precise coordinate measurements. Int. Journal of Precision Engineering and Manufacturing, 10 (5), 19-25.10.1007/s12541-009-0088-ySearch in Google Scholar

Lin, Y. C., Sun, W. I. (2003). Probe radius compensated by the multi-cross product method in free form surface measurement with touch trigger probe CMM. Int. Journal of Advanced Manufacturing Technology, 21, 902-909.10.1007/s00170-002-1413-0Search in Google Scholar

Li, L., Jung, J.-Y., Lee, CH.-M., Chung, W.-J. (2003). Compensation of probe radius in measuring freeformed curves and surface. Int. Journal of the Korean Society of Precision Engineering, 4 (3).Search in Google Scholar

Xiong, Z., Li, Z. (2003). Probe radius compensation of workpiece localization. Transactions of the ASME, 125, 100-104.10.1115/1.1537260Search in Google Scholar

Ali, S. H. R. (2010). Two dimensional model of CMM probing system. Journal of Automation, Mobile Robotics & Intelligent Systems, 4 (2), 3-7.Search in Google Scholar

Sokovic, M., Cedilnik, M., Kopac, J. (2007). Identification of scanning errors using touch trigger probe head. Journal of Achievements in Materials and Manufacturing Engineering, 20 (1-2), 383-386.Search in Google Scholar

Estler, W. T., Phillips, S. D., Borchardt, B., Hopp, T., Witzgall, C., Levenson, M., Eberhardt, K., McClain, M., Shen, Y., Zhang, X. (1996). Error compensation for CMM touch trigger probes. Precision Engineering, 19 (2), 85-97.10.1016/S0141-6359(96)00040-2Search in Google Scholar

Pereira, P. H., Hocken, R. J. (2007). Characterization and compensation of dynamic errors of a scanning coordinate measuring machine. Precision Engineering, 31(1), 22-32.10.1016/j.precisioneng.2006.01.006Search in Google Scholar

Hessling, J. P. (2008). Dynamic metrology - an approach to dynamic evaluation of linear timeinvariant measurement systems. Measurement Science and Technology, 19 (8).10.1088/0957-0233/19/8/084008Search in Google Scholar

Farooqui, A., Morse, P. (2007). Methods and artifacts for comparison of scanning CMM performance. Transactions of the ASME, 7, 72-80.10.1115/1.2709928Search in Google Scholar

Kosarevsky, S., Latypov, V. (2010). Inertia compensation while scanning screw threads on coordinate measurement machines. Measurement Science Review, 10 (2), 68-71.Search in Google Scholar

Yagüe, J.-A., Albajez, J.-A., Velázquez, J., Aguilar, J.-J. (2009). A new out-of-machine calibration technique for passive contact analog probes. Measurement, 42, 346-357.10.1016/j.measurement.2008.07.006Search in Google Scholar

Zhao, J., Fei, Y. T., Chen, X. H., Wang, H. T. (2005). Research on high-speed measurement accuracy of coordinate measuring machines. Journal of Physics: Conference Series, 13, 167-170.10.1088/1742-6596/13/1/039Search in Google Scholar

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions. (2009). Standard ISO 10360-2.Search in Google Scholar

Beaman, J., Morse, E. (2010). Experimental evaluation of software estimates of task specific measurement uncertainty for CMMs. Precision Engineering, 34, 28-33.10.1016/j.precisioneng.2009.08.006Search in Google Scholar

Articles recommandés par Trend MD

Planifiez votre conférence à distance avec Sciendo