<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The growing use of thermoplastic composites in aviation, automotive, sports and medical industries is forcing the development of processing technology. Due to the properties of thermoplastic composite materials, their shaping is subject to many restrictions. For this reason, it is not always possible to obtain components with complex geometry and adequate quality. By using numerical analysis and experience in the production of parts using hot pressing technology, we are able to predict the course of the process and the behaviour of the material during formation. The article describes how to build a model for numerical analysis of the process of thermoforming monolithic inspection door stiffening for an ILX-34 aircraft using a Toray Cetex® TC1225 carbon composite material with a thermoplastic polyaryletherketone (PAEK) matrix. Pam-Form v2019.0 software version V1.9.N was used for modelling. The results of the analysis were compared with those of the part produced by the Institute of Aviation, Łukasiewicz Research Network.</p>
</abstract>

The growing use of thermoplastic composites in aviation, automotive, sports and medical industries is forcing the development of processing technology. Due to the properties of thermoplastic composite materials, their shaping is subject to many restrictions. For this reason, it is not always possible to obtain components with complex geometry and adequate quality. By using numerical analysis and experience in the production of parts using hot pressing technology, we are able to predict the course of the process and the behaviour of the material during formation. The article describes how to build a model for numerical analysis of the process of thermoforming monolithic inspection door stiffening for an ILX-34 aircraft using a Toray Cetex® TC1225 carbon composite material with a thermoplastic polyaryletherketone (PAEK) matrix. Pam-Form v2019.0 software version V1.9.N was used for modelling. The results of the analysis were compared with those of the part produced by the Institute of Aviation, Łukasiewicz Research Network.

Modelling of the Monolithic Stiffener Forming Process from a Paek Thermoplastic Composite Matrix Using Pam-Form Software

Transactions on Aerospace Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The growing use of thermoplastic composites in aviation, automotive, sports and medical industries is forcing the development of processing technology. Due to...

Modelling of the Monolithic Stiffener Forming Process from a Paek Thermoplastic Composite Matrix Using Pam-Form Software

Article Category: research article

Publié en ligne: 12 juin 2023

Pages: 58 - 75

Reçu: 18 mars 2021

Accepté: 13 avr. 2023

DOI: https://doi.org/10.2478/tar-2023-0012

Mots clés
thermoplastic composite, thermoforming, fabric, PAEK, numerical analysis, monolithic part, aviation

© 2023 Witold Polański, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Modelling of the Monolithic Stiffener Forming Process from a Paek Thermoplastic Composite Matrix Using Pam-Form Software

Article Category: research article

Publié en ligne: 12 juin 2023

Pages: 58 - 75

Reçu: 18 mars 2021

Accepté: 13 avr. 2023

DOI: https://doi.org/10.2478/tar-2023-0012

Mots clésthermoplastic composite, thermoforming, fabric, PAEK, numerical analysis, monolithic part, aviation

© 2023 Witold Polański, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
thermoplastic composite, thermoforming, fabric, PAEK, numerical analysis, monolithic part, aviation