<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The aim of the article was to present selected methods for the production of layered composites in the aspect of the additive in the form of polyester-glass recyclate. The polyester-glass recyclate was obtained from the original composite material from which the ship’s hull was made in Poland in the 1980s. The article presents the technology of processing polyester-glass waste in order to obtain recyclate. The methods of manual lamination, vacuum bag method and vacuum infusion were described successively. The advantages and disadvantages of particular technologies have been presented in terms of the possibility of their use in the production of polyester-glass recycled composites. From the described and verified technologies, the vacuum bag method can be the most advantageous for composites with recyclate.</p></abstract>

The aim of the article was to present selected methods for the production of layered composites in the aspect of the additive in the form of polyester-glass recyclate. The polyester-glass recyclate was obtained from the original composite material from which the ship’s hull was made in Poland in the 1980s. The article presents the technology of processing polyester-glass waste in order to obtain recyclate. The methods of manual lamination, vacuum bag method and vacuum infusion were described successively. The advantages and disadvantages of particular technologies have been presented in terms of the possibility of their use in the production of polyester-glass recycled composites. From the described and verified technologies, the vacuum bag method can be the most advantageous for composites with recyclate.

Analysis of technologies for producing composites with polyester-glass recyclate

Faculty of Marine Engineering, Department of Engineering Sciences

Maritime Technical Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Analysis of technologies for producing composites with polyester-glass recyclate"}

The aim of the article was to present selected methods for the production of layered composites in the aspect of the additive in the form of polyester-glass...

Analysis of technologies for producing composites with polyester-glass recyclate

Publié en ligne: 30 sept. 2018

Pages: 63 - 73

Reçu: 04 juin 2018

Accepté: 29 sept. 2018

DOI: https://doi.org/10.2478/sjpna-2018-0019

Mots clés
composites, manual lamination, vacuum bag method, vacuum infusion

© 2018 Katarzyna Panasiuk, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Analysis of technologies for producing composites with polyester-glass recyclate

Publié en ligne: 30 sept. 2018

Pages: 63 - 73

Reçu: 04 juin 2018

Accepté: 29 sept. 2018

DOI: https://doi.org/10.2478/sjpna-2018-0019

Mots cléscomposites, manual lamination, vacuum bag method, vacuum infusion

© 2018 Katarzyna Panasiuk, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
composites, manual lamination, vacuum bag method, vacuum infusion