<abstract xmlns="http://www.w3.org/1999/xhtml">

This article presents a study on the stiffness of mixtures of anthropogenic materials derived from construction or demolition waste, specifically fine recycled concrete aggregates (fRCAs) with different fine fraction (FF) contents. The study investigated small-strain shear moduli via various signal interpretation methods, examining, above all, the time domain approaches and considering the influence of FF content. However, the inconclusive results from the bender element (BE) tests highlight the complexity of factors affecting shear wave velocity, which requires further research to refine the methodology and assess long-term performance in geotechnical applications.
Selecting the correct test frequency and interpretation method is crucial to obtain accurate results. The BE test method should consider all relevant factors. At low input frequencies (≤5 kHz), the near-field effect affected the received signal for fRCA mixtures. At higher frequencies (around 14 kHz), the noise levels increased, thereby interfering with the S-wave travel time determination. Intermediate input frequencies (10.0 and 12.5 kHz) provided the representative shear modulus (<italic>G</italic>) values. The small-strain shear modulus (<italic>G</italic>max) of the fRCA compounds from the resonant column and BE tests was found to be in good agreement, despite differences in the test procedures themselves.
</abstract>

This article presents a study on the stiffness of mixtures of anthropogenic materials derived from construction or demolition waste, specifically fine recycled concrete aggregates (fRCAs) with different fine fraction (FF) contents. The study investigated small-strain shear moduli via various signal interpretation methods, examining, above all, the time domain approaches and considering the influence of FF content. However, the inconclusive results from the bender element (BE) tests highlight the complexity of factors affecting shear wave velocity, which requires further research to refine the methodology and assess long-term performance in geotechnical applications.
Selecting the correct test frequency and interpretation method is crucial to obtain accurate results. The BE test method should consider all relevant factors. At low input frequencies (≤5 kHz), the near-field effect affected the received signal for fRCA mixtures. At higher frequencies (around 14 kHz), the noise levels increased, thereby interfering with the S-wave travel time determination. Intermediate input frequencies (10.0 and 12.5 kHz) provided the representative shear modulus (G) values. The small-strain shear modulus (Gmax) of the fRCA compounds from the resonant column and BE tests was found to be in good agreement, despite differences in the test procedures themselves.

Small-strain stiffness of selected anthropogenic aggregates from bender element tests

Department of Geotechnical Engineering, Institute of Civil Engineering

Warsaw University of Life Sciences - SGGW

Studia Geotechnica et Mechanica

This work is licensed under the Creative Commons Attribution 4.0 International License.

This article presents a study on the stiffness of mixtures of anthropogenic materials derived from construction or demolition waste, specifically fine recycled...

Small-strain stiffness of selected anthropogenic aggregates from bender element tests

Article Category: Research Article

Publié en ligne: 18 juil. 2024

Pages: -

Reçu: 18 mars 2024

Accepté: 14 mai 2024

DOI: https://doi.org/10.2478/sgem-2024-0013

Mots clés
piezoelectric transducers, initial shear modulus, recycled material, travel time interpretation

© 2024 Katarzyna Gabryś et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Small-strain stiffness of selected anthropogenic aggregates from bender element tests

Article Category: Research Article

Publié en ligne: 18 juil. 2024

Pages: -

Reçu: 18 mars 2024

Accepté: 14 mai 2024

DOI: https://doi.org/10.2478/sgem-2024-0013

Mots cléspiezoelectric transducers, initial shear modulus, recycled material, travel time interpretation

© 2024 Katarzyna Gabryś et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
piezoelectric transducers, initial shear modulus, recycled material, travel time interpretation