This work is licensed under the Creative Commons Attribution 4.0 International License.
Alabadan, B. A., Adekola, K. A., & Esumobi, T. J. (2016). Compressive strength of rice husk stabilized termite hill soil. Agricultural Engineering International: CIGR Journal.AlabadanB. A.AdekolaK. A.EsumobiT. J.2016Compressive strength of rice husk stabilized termite hill soilAgricultural Engineering International: CIGR JournalSearch in Google Scholar
Alake and Akaninyene,(2014) “Influence of curing media on the compressive strength of termite mound-lime blended cement mortar g media on the compressive strength of termite mound-lime blended cement mortar,” https://doi.org/10.11113/mjce.v26.15896AlakeAkaninyene2014“Influence of curing media on the compressive strength of termite mound-lime blended cement mortar g media on the compressive strength of termite mound-lime blended cement mortar,”https://doi.org/10.11113/mjce.v26.15896Search in Google Scholar
Assam, S., Okafor, F., & Umoh, U. (2016). Potentials of Processed Termite as a Stabilizing Agent in Clay Soil. IOSR Journal of Mechanical and Civil Engineering. https://doi.org/10.9790/1684-1304014050AssamS.OkaforF.UmohU.2016Potentials of Processed Termite as a Stabilizing Agent in Clay SoilIOSR Journal of Mechanical and Civil Engineeringhttps://doi.org/10.9790/1684-130401405010.9790/1684-1304014050Search in Google Scholar
ASTM-C216-16. (2013). Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or. American Society for Testing Material. https://doi.org/10.1520/C0652-12A.ASTM-C216-162013Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay orAmerican Society for Testing Materialhttps://doi.org/10.1520/C0652-12A10.1520/C0652-12ASearch in Google Scholar
ASTM C 618. (2010). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use. Annual Book of ASTM Standards.ASTM C 6182010Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for UseAnnual Book of ASTM StandardsSearch in Google Scholar
ASTM C62/C62M-12. (2012). Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale). ASTM International. https://doi.org/10.1520/C0062-10ASTM C62/C62M-122012Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)ASTM Internationalhttps://doi.org/10.1520/C0062-1010.1520/C0062-10Search in Google Scholar
ASTM C67-19. (2019). Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile. ASTM International. https://doi.org/10.1520/C0067ASTM C67-192019Standard Test Methods for Sampling and Testing Brick and Structural Clay TileASTM Internationalhttps://doi.org/10.1520/C006710.1520/C0067Search in Google Scholar
ASTM D 854. (2002). ASTM D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. ASTM International.ASTM D 8542002ASTM D854 Standard Test Methods for Specific Gravity of Soil Solids by Water PycnometerASTM InternationalSearch in Google Scholar
Attah, L. E. (2008). The Composition and Physical Properties of Some Clays of Cross River State, Nigeria. African Research Review. https://doi.org/10.4314/afrrev.v2i1.41026AttahL. E.2008The Composition and Physical Properties of Some Clays of Cross River State, NigeriaAfrican Research Reviewhttps://doi.org/10.4314/afrrev.v2i1.4102610.4314/afrrev.v2i1.41026Search in Google Scholar
Brick: a world history. (2004). Choice Reviews Online. https://doi.org/10.5860/choice.41-3863Brick: a world history2004Choice Reviews Onlinehttps://doi.org/10.5860/choice.41-386310.5860/CHOICE.41-3863Search in Google Scholar
Brick Development Association, T. (2006). BDA Guide to Successful Brickwork. In BDA Guide to Successful Brickwork (Third Edit). https://doi.org/10.4324/9780080456287Brick Development Association, T.2006BDA Guide to Successful BrickworkInBDA Guide to Successful BrickworkThird Edithttps://doi.org/10.4324/978008045628710.4324/9780080456287Search in Google Scholar
BS 3921(1985) Specification for clay bricks. British Standards Institution https://infostore.saiglobal.com/en-us/Standards/BS-3921-1985-1985-196932_SAIG_BSI_BSI_469615/BS 39211985Specification for clay bricksBritish Standards Institutionhttps://infostore.saiglobal.com/en-us/Standards/BS-3921-1985-1985-196932_SAIG_BSI_BSI_469615/Search in Google Scholar
Chin, I. R., & Behie, B. (2010). Efflorescence: Evaluation of published test methods for brick and efforts to develop a Masonry assembly test method. Journal of ASTM International. https://doi.org/10.1520/JAI102744ChinI. R.BehieB.2010Efflorescence: Evaluation of published test methods for brick and efforts to develop a Masonry assembly test methodJournal of ASTM Internationalhttps://doi.org/10.1520/JAI10274410.1520/STP49100SSearch in Google Scholar
Dalkılıç, N., & Nabikoğlu, A. (2017). Traditional manufacturing of clay brick used in the historical buildings of Diyarbakir (Turkey). Frontiers of Architectural Research. https://doi.org/10.1016/j.foar.2017.06.003DalkılıçN.NabikoğluA.2017Traditional manufacturing of clay brick used in the historical buildings of Diyarbakir (Turkey)Frontiers of Architectural Researchhttps://doi.org/10.1016/j.foar.2017.06.00310.1016/j.foar.2017.06.003Search in Google Scholar
Das, B., & Sawicki, A. (2001). Fundamentals of Geotechnical Engineering. In Applied Mechanics Reviews (Third). Chris Carson. https://doi.org/10.1115/1.1421116DasB.SawickiA.2001Fundamentals of Geotechnical EngineeringInApplied Mechanics ReviewsThirdChris Carsonhttps://doi.org/10.1115/1.142111610.1115/1.1421116Search in Google Scholar
Dos Reis, G. S., Cazacliu, B. G., Cothenet, A., Poullain, P., Wilhelm, M., Sampaio, C. H., Lima, E. C., Ambros, W., & Torrenti, J. M. (2020). Fabrication, microstructure, and properties of fired clay bricks using construction and demolition waste sludge as the main additive. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.120733Dos ReisG. S.CazacliuB. G.CothenetA.PoullainP.WilhelmM.SampaioC. H.LimaE. C.AmbrosW.TorrentiJ. M.2020Fabrication, microstructure, and properties of fired clay bricks using construction and demolition waste sludge as the main additiveJournal of Cleaner Productionhttps://doi.org/10.1016/j.jclepro.2020.12073310.1016/j.jclepro.2020.120733Search in Google Scholar
Dr.k. Arora, Soil mechanics and foundation engineering,. 7th Edition print 2019 Edition Delhi. 2019Arorak.Dr.Soil mechanics and foundation engineering7th Edition print 2019 EditionDelhi2019Search in Google Scholar
Drive, C. P. (2007). Specifications for and Classification of Brick. Technical Notes on Brick Construction.DriveC. P.2007Specifications for and Classification of BrickTechnical Notes on Brick ConstructionSearch in Google Scholar
Efrem Wakjira Hode. (2015). Study of Compressed Earth Blocks as an Alternative Wall Building Material. International Journal of Engineering Research and Technology (IJERT).Efrem Wakjira Hode2015Study of Compressed Earth Blocks as an Alternative Wall Building MaterialInternational Journal of Engineering Research and Technology (IJERT)Search in Google Scholar
Eze, P. N., Kokwe, A., & Eze, J. U. (2020). Advances in Nanoscale Study of Organomineral Complexes of Termite Mounds and Associated Soils: A Systematic Review. In Applied and Environmental Soil Science. https://doi.org/10.1155/2020/8087273EzeP. N.KokweA.EzeJ. U.2020Advances in Nanoscale Study of Organomineral Complexes of Termite Mounds and Associated Soils: A Systematic ReviewInApplied and Environmental Soil Sciencehttps://doi.org/10.1155/2020/808727310.1155/2020/8087273Search in Google Scholar
Fufa, F. (2016). Experimental Evaluation of Activated Termite Mound for Fluoride Adsorption. IOSR Journal of Environmental Science, Toxicology and Food Technology. https://doi.org/10.9790/2402-100802119132FufaF.2016Experimental Evaluation of Activated Termite Mound for Fluoride AdsorptionIOSR Journal of Environmental Science, Toxicology and Food Technologyhttps://doi.org/10.9790/2402-10080211913210.9790/2402-100802119132Search in Google Scholar
Getachew, K., & Mosisa, A. (2017). Laboratory Investigation of Locally Produced Clay Brick Quality and Suitability for Load Bearing Element in Jimma Area, Ethiopia Alemu Mosisa. International Journal of Engineering Research & Technology.GetachewK.MosisaA.2017Laboratory Investigation of Locally Produced Clay Brick Quality and Suitability for Load Bearing Element in Jimma Area, Ethiopia Alemu MosisaInternational Journal of Engineering Research & TechnologySearch in Google Scholar
Glaydson Simõesdos Reisab Bogdan Grigore Cazacliub Alexis Cothenetb Philippe Poullainc Michaela Wilhelmd Carlos Hoffmann Sampaioae Eder Claudio Limaah Weslei Ambrosf Jean and Michel Torrentig “Fabrication, microstructure, and properties of fired clay bricks using construction and demolition waste sludge as the main additive,” J. Clean. Prod., 2020, doi: 10.1016/j.jclepro.2020.120733.Glaydson Simõesdos Reisab Bogdan Grigore Cazacliub Alexis Cothenetb Philippe Poullainc Michaela Wilhelmd Carlos Hoffmann Sampaioae Eder Claudio Limaah Weslei Ambrosf Jean and Michel Torrentig “Fabrication, microstructure, and properties of fired clay bricks using construction and demolition waste sludge as the main additive,”J. Clean. Prod.202010.1016/j.jclepro.2020.120733Open DOISearch in Google Scholar
Hartmann, K., Krishnan, R., Merz, R., Neplotnik, G., Prinz, F. B., Schultz, L., Terk, M., & Weiss, L. E. (2018). Robot-assisted shape deposition manufacturing. In Proceedings - IEEE International Conference on Robotics and Automation (Vol. 1). https://doi.org/10.1109/robot.1994.350900HartmannK.KrishnanR.MerzR.NeplotnikG.PrinzF. B.SchultzL.TerkM.WeissL. E.2018Robot-assisted shape deposition manufacturingInProceedings - IEEE International Conference on Robotics and Automation1https://doi.org/10.1109/robot.1994.35090010.1109/ROBOT.1994.350900Search in Google Scholar
Impact Analysis Of Informal Brick Production On The Environment: Gaborone Dam Area, Botswana. (2013). International Journal of Scientific & Technology Research.Impact Analysis Of Informal Brick Production On The Environment: Gaborone Dam Area, Botswana2013International Journal of Scientific & Technology ResearchSearch in Google Scholar
James W. P. Campbell and William Pryce, “Brick: a world history,” Choice Rev. Online, 2004, doi: 10.5860/choice.41-3863.JamesW. P. CampbellPryceWilliam“Brick: a world history,”Choice Rev. Online200410.5860/choice.41-3863Open DOISearch in Google Scholar
Johari, I., Said, S., Hisham, B., Bakar, A., & Ahmad, Z. A. (2010). Effect of the change of firing temperature on microstructure and physical properties of clay bricks from beruas (Malaysia). Science of Sintering. https://doi.org/10.2298/SOS1002245JJohariI.SaidS.HishamB.BakarA.AhmadZ. A.2010Effect of the change of firing temperature on microstructure and physical properties of clay bricks from beruas (Malaysia)Science of Sinteringhttps://doi.org/10.2298/SOS1002245J10.2298/SOS1002245JSearch in Google Scholar
Karaman, S., Ersahin, S., & Gunal, H. (2006). Firing temperature and firing time influence on mechanical and physical properties of clay bricks. Journal of Scientific and Industrial Research.KaramanS.ErsahinS.GunalH.2006Firing temperature and firing time influence on mechanical and physical properties of clay bricksJournal of Scientific and Industrial ResearchSearch in Google Scholar
Matysek, P., Stryszewska, T., Kańka, S., & Witkowski, M. (2016). The influence of water saturation on mechanical properties of ceramic bricks – tests on 19th-century and contemporary bricks. Materiales de Construcción. https://doi.org/10.3989/mc.2016.07315MatysekP.StryszewskaT.KańkaS.WitkowskiM.2016The influence of water saturation on mechanical properties of ceramic bricks – tests on 19th-century and contemporary bricksMateriales de Construcciónhttps://doi.org/10.3989/mc.2016.0731510.3989/mc.2016.07315Search in Google Scholar
Millogo, Y., Hajjaji, M., & Morel, J. C. (2011). Physical properties, microstructure and mineralogy of termite mound material considered as construction materials. Applied Clay Science. https://doi.org/10.1016/j.clay.2011.02.016MillogoY.HajjajiM.MorelJ. C.2011Physical properties, microstructure and mineralogy of termite mound material considered as construction materialsApplied Clay Sciencehttps://doi.org/10.1016/j.clay.2011.02.01610.1016/j.clay.2011.02.016Search in Google Scholar
Miyagawa, S., Koyama, Y., Kokubo, M., Matsushita, Y., Adachi, Y., Sivilay, S., Kawakubo, N., & Oba, S. (2011). Indigenous utilization of termite mounds and their sustainability in a rice growing village of the central plain of Laos. Journal of Ethnobiology and Ethnomedicine. https://doi.org/10.1186/1746-4269-7-24MiyagawaS.KoyamaY.KokuboM.MatsushitaY.AdachiY.SivilayS.KawakuboN.ObaS.2011Indigenous utilization of termite mounds and their sustainability in a rice growing village of the central plain of LaosJournal of Ethnobiology and Ethnomedicinehttps://doi.org/10.1186/1746-4269-7-2410.1186/1746-4269-7-24317411121849087Search in Google Scholar
Okunade, E. A. (2008). Engineering properties of locally manufactured burnt brick pavers for agrarian and rural Earth roads. American Journal of Applied Sciences. https://doi.org/10.3844/ajassp.2008.1348.1351OkunadeE. A.2008Engineering properties of locally manufactured burnt brick pavers for agrarian and rural Earth roadsAmerican Journal of Applied Scienceshttps://doi.org/10.3844/ajassp.2008.1348.135110.3844/ajassp.2008.1348.1351Search in Google Scholar
Omobowale, M. O., Armstrong, P. R., Mijinyawa, Y., Igbeka, J. C., & Maghirang, E. B. (2016). Maize storage in termite mound clay, concrete, and steel silos in the humid tropics: Comparison and effect on bacterial and fungal counts. Transactions of the ASABE. https://doi.org/10.13031/trans.59.11437OmobowaleM. O.ArmstrongP. R.MijinyawaY.IgbekaJ. C.MaghirangE. B.2016Maize storage in termite mound clay, concrete, and steel silos in the humid tropics: Comparison and effect on bacterial and fungal countsTransactions of the ASABEhttps://doi.org/10.13031/trans.59.1143710.13031/trans.59.11437Search in Google Scholar
Toure, P. M., Sambou, V., Faye, M., & Thiam, A. (2017). Mechanical and thermal characterization of stabilized earth bricks. Energy Procedia. https://doi.org/10.1016/j.egypro.2017.11.271ToureP. M.SambouV.FayeM.ThiamA.2017Mechanical and thermal characterization of stabilized earth bricksEnergy Procediahttps://doi.org/10.1016/j.egypro.2017.11.27110.1016/j.egypro.2017.11.271Search in Google Scholar
Eshetu Tsega, Alemu M. Legese and Fekadu F. Feyissa (2017). Effects of Firing Time and Temperature on Physical Properties of Fired Clay Bricks. American Journal of Civil Engineering. https://doi.org/10.11648/j.ajce.20170501.14TsegaEshetuLegeseAlemu M.FeyissaFekadu F.2017Effects of Firing Time and Temperature on Physical Properties of Fired Clay BricksAmerican Journal of Civil Engineeringhttps://doi.org/10.11648/j.ajce.20170501.1410.11648/j.ajce.20170501.14Search in Google Scholar
United Nations. (2019). The sustainable development goals report 2019. In United Nations publication issued by the Department of Economic and Social Affairs.United Nations2019The sustainable development goals report 2019InUnited Nations publication issued by the Department of Economic and Social AffairsSearch in Google Scholar
Woetzel, J., Ram, S., Mischke, J., Garemo, N., & Sankhe, S. (2014). A blueprint for addressing the global affordable housing challenge. In McKinsey Global Institute.WoetzelJ.RamS.MischkeJ.GaremoN.SankheS.2014A blueprint for addressing the global affordable housing challengeInMcKinsey Global InstituteSearch in Google Scholar