This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
ACI Committee 355. (1991). State-of-the-art report on anchorage to concrete (ACI 355.1R-91). Reapproved 1997. Detroit, USA: American Concrete Institute.ACI Committee 3551991Reapproved 1997.Detroit, USAAmerican Concrete InstituteSearch in Google Scholar
Ashour, A., & Alqedra, M. (2005). Concrete breakout strength of single anchors in tension using neural networks. Advances in Engineering Software, 36(2), 87–97.AshourA.AlqedraM.2005Concrete breakout strength of single anchors in tension using neural networks362879710.1016/j.advengsoft.2004.08.001Search in Google Scholar
Brincker, R., Ulfkjær, J. P., Adamsen, P., Langvad, L., & Toft, R. (1995). Analytical Model for Hook Anchor Pull-out. In R. Widmann (Ed.), Proceedings of the International Symposium on Anchors in Theory and Practice: Salzburg, Austria, 9–10 october 1995 (pp. 3–15)BrinckerR.UlfkjærJ. P.AdamsenP.LangvadL.ToftR.1995InWidmannR.(Ed.),Proceedings of the International Symposium on Anchors in Theory and PracticeSalzburg, Austria9–10 october 1995315Search in Google Scholar
Cebula, D. (2015). Wyniki badań dołowych technologii mechanicznego odspajania skał. In Nowoczesne metody eksploatacji węgla i skał zwięzłych: Monografia (The results of underground testing of mechanical rock break technology. Modern methods of coal and solid rock mining. Monograph. – in polish) (pp.212–222). Kraków: Akademia Górniczo-Hutnicza im. Stanisława Staszica.CebulaD.2015Wyniki badań dołowych technologii mechanicznego odspajania skałIn212222KrakówAkademia Górniczo-Hutnicza im. Stanisława StaszicaSearch in Google Scholar
CEN/TC250, “EN1992-4 - Eurocode 2: Design of concrete structures - Part 4: Design of fastenings for use in concrete,” 2018.2018Search in Google Scholar
CEN/TS 1992-4-1: Design of fastenings for use in concrete - Part 4-1: General, CEN, Brussels, 2009.CENBrussels2009Search in Google Scholar
Comite Euro-International du Beton (CEB). (1994). Fastenings to concrete and masonry structures. London, England: Thomas Telford Services Ltd.Comite Euro-International du Beton (CEB)1994London, EnglandThomas Telford Services Ltd10.1680/ftcams.35423Search in Google Scholar
Drwięga, A., et. al. (2014). Sprawozdanie za rok 2014 z realizacji projektu INREQ (Report for 2014 on the implementation of the INREQ project – in polish),. Unpublished Report. Gliwice: ITG KOMAG.DrwięgaA.2014Unpublished Report.GliwiceITG KOMAGSearch in Google Scholar
Fuchs, W., Eligehausen, R., Breen, J.E. (1995). Concrete capacity design (CCD) approach for fastening to concrete. ACI Structure Journal, 92 (1), 73–94.FuchsW.EligehausenR.BreenJ.E.1995Concrete capacity design (CCD) approach for fastening to concrete921739410.14359/1533Search in Google Scholar
Gontarz, J., Podgórski, J., Jonak, J., Kalita, M., & Siegmund, M. (2019). Comparison between numerical analysis and actual results for a pull-out test. Engineering Transactions, 67(3), 311–331. doi:10.24423/EngTrans.1005.20190815GontarzJ.PodgórskiJ.JonakJ.KalitaM.SiegmundM.2019Comparison between numerical analysis and actual results for a pull-out test67331133110.24423/EngTrans.1005.20190815Open DOISearch in Google Scholar
Gontarz, J., Podgórski, J., Siegmund, M. (2017). Comparison of crack propagation analyses in a pull-out test: AIP Conference Proceedings. 1922. doi: 10.1063/1.5019141GontarzJ.PodgórskiJ.SiegmundM.2017192210.1063/1.5019141Open DOISearch in Google Scholar
Hariyadi, Munemoto, S., & Sonoda, Y. (2017). Experimental analysis of anchor bolt in concrete under the pull-out loading. Paper presented at the Procedia Engineering, 171 926–933. doi:10.1016/j.proeng.2017.01.391HariyadiMunemotoS.SonodaY.2017Experimental analysis of anchor bolt in concrete under the pull-out loading17192693310.1016/j.proeng.2017.01.391Open DOISearch in Google Scholar
Hilti. (2014). Anchor Fastening: Technology Manual, 09. Retrieved from https://www.hilti.group/content/dam/documents/pdf/a1/singapore/thailand-products-catalog/Thailand-Anchor%20Fastening%20Technology%20Manual-th.pdfHilti201409. Retrieved from https://www.hilti.group/content/dam/documents/pdf/a1/singapore/thailand-products-catalog/Thailand-Anchor%20Fastening%20Technology%20Manual-th.pdfSearch in Google Scholar
Jonak, J., & Siegmund, M. (2019). FEM 3D analysis of rock cone failure range during pull-out of undercut anchors. Paper presented at the IOP Conference Series: Materials Science and Engineering, 710(1) doi:10.1088/1757-899X/710/1/012046JonakJ.SiegmundM.2019FEM 3D analysis of rock cone failure range during pull-out of undercut anchors710110.1088/1757-899X/710/1/012046Open DOISearch in Google Scholar
Jonak, J., Siegmund, M., et al. (2018). Sprawozdanie z realizacji zadania 2 projektu RODEST (Report on implementation of tasks 2 of the RODEST project – in polish), Unpublished Research Paper. Gliwice: ITG KOMAG.JonakJ.SiegmundM.2018Unpublished Research Paper.GliwiceITG KOMAGSearch in Google Scholar
Kalita, M., & Prostański, D. (2012). Technologia drążenia tuneli ratowniczych metodą niszczenia spójności skał. (Technology of rescue tunneling by use of rock cohesion damaging method – in polish) Przegląd Górniczy, 12. 86–91. 1KalitaM.ProstańskiD.2012Technologia drążenia tuneli ratowniczych metodą niszczenia spójności skał. (Technology of rescue tunneling by use of rock cohesion damaging method – in polish)1286911Search in Google Scholar
Klich, A. Et al. (1998). Niekonwencjonalne techniki urabiania skał (Unconventional rock mining techniques – in polish). Katowice: Wydawnictwo Śląsk.KlichA.1998KatowiceWydawnictwo ŚląskSearch in Google Scholar
Nilforoush, R. (2019)- A Refined Model for Predicting Concrete-Related Failure Load of Tension Loaded Cast-in-Place Headed Anchors in Uncracked Concrete. Nordic Concrete Research Volume 60 (2019), (pp. 105–129) doi:10.2478/ncr-2019-0091NilforoushR.2019A Refined Model for Predicting Concrete-Related Failure Load of Tension Loaded Cast-in-Place Headed Anchors in Uncracked Concrete60201910512910.2478/ncr-2019-0091Open DOISearch in Google Scholar
Piccinin, R.; Ballarini, R.; Cattaneo, S. Pullout Capacity of Headed Anchors in Prestressed Concrete. Journal of Engineering Mechanics 2012, 138, 877–887.PiccininR.BallariniR.CattaneoS.Pullout Capacity of Headed Anchors in Prestressed Concrete201213887788710.1061/(ASCE)EM.1943-7889.0000395Search in Google Scholar
Siegmund, M., & Jonak, J. (2017). Analiza wyników badań wstępnych oraz określenie kierunku dalszych prac badawczych technologii drążenia tuneli ratowniczych metodą mechanicznego odspojenia. Analysis of the results of preliminary studies and determination of direction of further research work on technology of drilling the rescue tunnels by the method of mechanical loosening - in polish), Cuprum, 1, 57–71SiegmundM.JonakJ.2017Analiza wyników badań wstępnych oraz określenie kierunku dalszych prac badawczych technologii drążenia tuneli ratowniczych metodą mechanicznego odspojenia15771Search in Google Scholar
Siegmund, M., & Jonak, J. (2019). Analysis of the process of loosening the rocks with different strength properties using the undercutting bolts. Paper presented at the IOP Conference Series: Materials Science and Engineering, 679(1) doi:10.1088/1757-899X/679/1/012014SiegmundM.JonakJ.2019Analysis of the process of loosening the rocks with different strength properties using the undercutting bolts679110.1088/1757-899X/679/1/012014Open DOISearch in Google Scholar
Subramanian, N. Recent developments in the design of anchor bolts, The IndianConcrete Journal, July 2000, Vol. 74, No. 7, pp. 407–414.SubramanianN.Recent developments in the design of anchor boltsJuly2000747407414Search in Google Scholar
Tan, E. L., Varsani, H., Liao, F. Y. (2019). Experimental study on demountable steel-concrete connectors subjected to combined shear and tension. Engineering Structures, 183, 110–123. doi: 10.1016/j.engstruct.2018.12.08TanE.L.VarsaniH.LiaoF.Y.2019Experimental study on demountable steel-concrete connectors subjected to combined shear and tension18311012310.1016/j.engstruct.2018.12.08Open DOISearch in Google Scholar
Tomiczek, K. (2017–2018). Badania wytrzymałościowe wybranych skał magmowych i osadowych: Raporty z badań dla ITG KOMAG (Strength tests of selected igneous and sedimentary rocks. Research reports for ITG KOMAG – in polish) (NB-363/RG4/2017, NB-11/RG4/2017, NB-117/RG4/2018, NB 266/RG-4/2018). Unpublished Research Reports. Gliwice: Politechnika Śląska.TomiczekK.2017–2018(NB-363/RG4/2017, NB-11/RG4/2017, NB-117/RG4/2018, NB 266/RG-4/2018). Unpublished Research ReportsGliwicePolitechnika ŚląskaSearch in Google Scholar