<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper presents the results of modelling and investigation of the gear cutting process using the power skiving method. The investigations are based on the developed geometrical model of undeformed chips. The approach is based on the original method of forming an integral three-dimensional model on the basis of discrete cross-sections of tool tooth in their successive positions on the cutting path, taking into account the shape and size of the gap previously formed by this tooth. The formulae for calculating the cutting force and the forces acting on the work gear and tool are derived as a function of the angular position of the cutter. The dependence of this force on the angle of tool shaft setting and the angle of inclination of gear teeth is studied. The formulae take into account how the cutting intensity changes due to the peculiarities of the kinematics of power skiving technology and the influence of the actual geometric parameters of the tool on the cutting force. Based on the obtained dependencies, a methodology has been developed for the selection of the axial feed rate and spindle set angle to ensure a compromise between the required productivity and the accuracy of the gear profile.</p>
</abstract>

The paper presents the results of modelling and investigation of the gear cutting process using the power skiving method. The investigations are based on the developed geometrical model of undeformed chips. The approach is based on the original method of forming an integral three-dimensional model on the basis of discrete cross-sections of tool tooth in their successive positions on the cutting path, taking into account the shape and size of the gap previously formed by this tooth. The formulae for calculating the cutting force and the forces acting on the work gear and tool are derived as a function of the angular position of the cutter. The dependence of this force on the angle of tool shaft setting and the angle of inclination of gear teeth is studied. The formulae take into account how the cutting intensity changes due to the peculiarities of the kinematics of power skiving technology and the influence of the actual geometric parameters of the tool on the cutting force. Based on the obtained dependencies, a methodology has been developed for the selection of the axial feed rate and spindle set angle to ensure a compromise between the required productivity and the accuracy of the gear profile.

Justification of the Choice of Parameters for the Gear Power Skiving Operation Based on Computer Simulation

Department of Mechanical Engineering Technologies

Lviv Polytechnic National University, Institute of Engineering Mechanics and Transport

Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper presents the results of modelling and investigation of the gear cutting process using the power skiving method. The investigations are based on the...

Justification of the Choice of Parameters for the Gear Power Skiving Operation Based on Computer Simulation

Publié en ligne: 23 nov. 2023

Pages: 33 - 44

DOI: https://doi.org/10.2478/scjme-2023-0020

Mots clés
undeformed chip, external gear, cutting force, power skiving process, simulation, machining error

© 2023 Ihor Hrytsay et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Justification of the Choice of Parameters for the Gear Power Skiving Operation Based on Computer Simulation

Publié en ligne: 23 nov. 2023

Pages: 33 - 44

DOI: https://doi.org/10.2478/scjme-2023-0020

Mots clésundeformed chip, external gear, cutting force, power skiving process, simulation, machining error

© 2023 Ihor Hrytsay et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
undeformed chip, external gear, cutting force, power skiving process, simulation, machining error