Accès libre

Experimental Determination of Changing the Axial Force in the Bolts of the Clamping Sleeve Under Its Axial Load

Hruzík Lukáš

Hruzík Lukáš

VSB – TU Ostrava, Faculty of Mechanical engineering, Department of machine parts and mechanisms
Recherchez cet auteur sur
Sciendo|Google Scholar
Lukáš, Hruzík
, 
Struž Jiří

Struž Jiří

VSB – TU Ostrava, Faculty of Mechanical engineering, Department of machine parts and mechanisms
Recherchez cet auteur sur
Sciendo|Google Scholar
Jiří, Struž
 et 
Kaláb Květoslav

Kaláb Květoslav

VSB – TU Ostrava, Faculty of Mechanical engineering, Department of machine parts and mechanisms
Recherchez cet auteur sur
Sciendo|Google Scholar
Květoslav, Kaláb
  
08 oct. 2021
Experimental Determination of Changing the Axial Force in the Bolts of the Clamping Sleeve Under Its Axial Load's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 08 oct. 2021
Pages: 79 - 86
DOI: https://doi.org/10.2478/scjme-2021-0007
Mots clés
© 2021 Hruzík Lukáš et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper deals about experimental determination of changing the axial load in the bolts of the clamping sleeve under its axial load. Inspiration for this experiment was FEM analysis clamping sleeve in Ansys workbench. Changing of the axial load in the bolts is very important for fatigue of bolt. Bolt force and pretension is necessary for transmit axial load and torque. the change occurs when the sleeve is loaded by the axial force.

Langue:
Anglais
Périodicité:
2 fois par an
Sujets de la revue:
Ingénierie, Génie mécanique, Fondamentaux du génie mécanique, Mécanique
RSS Feed de la revue