[
[1] Chudzik, A., Świniarski, J. “Effect of changes in the thickness of a perforated plate of the heat exchanger on its structural stability”, Journal of Theoretical and Applied Mechanics 42(2), pp. 325 – 334, 2004.
]Search in Google Scholar
[
[2] www.famet.com.pl 11.08.2018.
]Search in Google Scholar
[
[3] Pástor, M., Čarák, P., Gomory, I. “The assessment of the residual stresses influence on generation of the infringement in shape-complex supporting members”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp. 85 – 96, 2019. DOI: 10.2478/scjme-2019-000710.2478/scjme-2019-0007
]Search in Google Scholar
[
[4] Paška, Z., Fojtík, F., Ferfecki, P. “Full field evaluation of the stress tensor components in 2D photoelasticity via computer software”, Strojnícky časopis – Journal of Mechanical Engineering 66 (2), pp. 63 – 66, 2016. DOI: 10.1515/scjme-2016-001910.1515/scjme-2016-0019
]Search in Google Scholar
[
[5] Bhattacharya, A., Venkat, R. “Peak stress multipliers for thin perforated plates with square arrays of circular hole”, International Journal of Pressure Vessels and Piping 80, pp. 379 – 388, 2003.10.1016/S0308-0161(03)00067-X
]Search in Google Scholar
[
[6] Bhattacharya, A., Venkat, R. “Yield Surfaces for Perforated Plates with Square Arrays of Holes”, Nuclear Engineering and Design 231, pp. 219 – 233, 2004.10.1016/j.nucengdes.2004.04.001
]Search in Google Scholar
[
[7] Andh, U., Chavan, S., Kulkarni, S., Khurd, S. “Stress analysis of perforated plates under uniaxial compression using FEA and photoelasticity”, International Research Journal of Engineering and Technology 3 (11), pp. 239 – 244, 2016.
]Search in Google Scholar
[
[8] Andh, U., Chavan, S., Kulkarni, S. “Stress analysis of perforated plates under uniaxial compression using experimentation and finite element analysis”, International Journal of Current Engineering and Technology 7 (2), pp. 431 – 437, 2017.
]Search in Google Scholar
[
[9] Gasiak, G., Ledwoń, W. “Analiza numeryczna stanu naprężenia i ugięcia płyt perforowanych obciążonych siłą skupioną”, Górnictwo odkrywkowe 55 (4), pp. 250 – 253, 2014. (in Polish).
]Search in Google Scholar
[
[10] Achtelik, H., Gasiak, G., Grzelak, J. “Strength tests of axially symmetric perforated plates for chemical reactors: Part 1 - The simulation of stress state”, International Journal of Pressure Vessels and Piping 85, pp. 248 – 256, 2008.10.1016/j.ijpvp.2007.08.009
]Search in Google Scholar
[
[11] Gomez, E., Ruiz, R., Wilson, R. “Asme section III stress analysis of a heat exchanger tubesheet with a misdrilled hole and irregular or thin ligaments”, Proceedings of the ASME 2013 Pressure Vessels and Piping Conference 14 - 18 July, Paris, France, pp. 1 – 8, 2013.10.1115/PVP2013-97075
]Search in Google Scholar
[
[12] Achtelik, H., Gasiak, G., Grzelak, J. “Strength tests of axially symmetric perforated plates for chemical reactors: Part 2 – Experiments”, International Journal of Pressure Vessels and Piping 85, pp. 257 – 264, 2008.10.1016/j.ijpvp.2007.08.010
]Search in Google Scholar
[
[13] Ledwoń, W., Achtelik, H. “Experimental Analysis of the State of Stress of the Axisymetric Perforated Plateds Loaded with Hydrostatic Pressure”, Proceedings of the 13th International Scientific Conference, Computer Aided Engineering, Polanica Zdrój, pp. 331 – 341, 2016.10.1007/978-3-319-50938-9_34
]Search in Google Scholar
[
[14] El-Sawy, K. M., Nazmy, A. A., Mautini, M. J. “Elasto-plastic buckling of perforated plates uniaxial compression”, Thin – Walled Structures 42, pp. 1083 – 1101, 2004.
]Search in Google Scholar
[
[15] Minguez J. M., Vogwell, J. “Plater with holes under laternal load pressure”, Engineering Failure Analysis 4, pp. 299 – 315, 1998.10.1016/S1350-6307(98)00021-1
]Search in Google Scholar
[
[16] Konieczny, M. “Numeryczna analiza stanu naprężenia w kołowosymetrycznej płycie z otworem centralntm przy dwóch wariantach obciążenia”, Zagadnienia Aktualnie Poruszane przez Młodych Naukowców 14 Kraków, 2019. ISBN: 978-83-63058-87-6 178-184 (in Polish).
]Search in Google Scholar
[
[17] Konieczny, M., Gasiak, G. “State of Stress in the Plate with Slot at Biaxial Load”, Conference Proceedings Fatigue Failure and Fracture Mechanics XXVII, 2018. ISSN: 978-0-7354-1750-2 1-9.
]Search in Google Scholar
[
[18] Konieczny, M., Gasiak, G. “Research of maximum stresses zones in circular perforated plates made of S235JR steel loaded with concentrated force”, Inżynieria Materiałowa – Materials Engineering 2 (228), pp. 39 – 46, 2019.10.15199/28.2019.2.4
]Search in Google Scholar
[
[19] Konieczny, M., Achtelik, H., Gasiak, G. “Finite Element Analysis (FEA) and experimental stress analysis in circular perforated plates loaded with concentrated force”, Frattura ed Integrità Strutturale 51, pp. 164 – 173, 2020.10.3221/IGF-ESIS.51.13
]Search in Google Scholar
[
[20] Real, M., Isoldi, L. A., Damas A. P., Helbig, D. “Elastic and elasto-plastic buckling analysis of perforated steel plates”, Vetor 23 (2), pp. 61 – 70, 2013.
]Search in Google Scholar
[
[21] Konieczny, M., Gasiak, G. “Badanie wpływu zamocowania kołowej płyty perforowanej na koncentrację naprężenia w warunkach działania ciśnienia hydrostatycznego”, Zeszyty Naukowe Politechniki Rzeszowskiej – Scientific Letters of Rzeszow University of Technology 299 (1 – 2), pp. 41 – 52, 2019. (in Polish).10.7862/rm.2019.04
]Search in Google Scholar
[
[22] Saraçoğlu, M., Albayrak, U. “Linear static analysis of perforated plates with round and staggered holes under their self-weights”, Research of Engineering Structures and Materials 2 (1), pp. 39 – 47, 2016.10.17515/resm2015.25me0910
]Search in Google Scholar
[
[23] www.mesco.com.pl 15.04.2017.
]Search in Google Scholar
[
[24] Jakubowicz, A., Orłoś, Z. “Wytrzymałość materiałów”, WNT Warszawa, 1984. (in Polish).
]Search in Google Scholar
