<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The technique of obtaining a hyperboloidal gear engagement with linear contact between a cylindrical involute wheel and a hyperboloid producing worm is considered. The resulting cutting tool greatly simplifies the manufacturing technology of hyperboloid worms and hyperboloid gears along with improved accuracy and roughness of the machined teeth and lower manufacturing costs.</p></abstract>

The technique of obtaining a hyperboloidal gear engagement with linear contact between a cylindrical involute wheel and a hyperboloid producing worm is considered. The resulting cutting tool greatly simplifies the manufacturing technology of hyperboloid worms and hyperboloid gears along with improved accuracy and roughness of the machined teeth and lower manufacturing costs.

Methods of Designing Gear’s Machining Tools with the Hyperboloid Cutting Part

National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Slovak University of Technology in Bratislava

Volodymyr Dahl East Ukrainian National University

Central Ukrainian National Technical University

National Technical University “Kharkiv Polytechnical Institute”

Strojnícky časopis - Journal of Mechanical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The technique of obtaining a hyperboloidal gear engagement with linear contact between a cylindrical involute wheel and a hyperboloid producing worm is...

Methods of Designing Gear’s Machining Tools with the Hyperboloid Cutting Part

Publié en ligne: 13 mai 2020

Pages: 135 - 142

DOI: https://doi.org/10.2478/scjme-2020-0013

Mots clés
gear, shaping pattern, toothed hyperboloid tool, profile, generating edge

© 2020 Vorontsov Boris et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Methods of Designing Gear’s Machining Tools with the Hyperboloid Cutting Part

Publié en ligne: 13 mai 2020

Pages: 135 - 142

DOI: https://doi.org/10.2478/scjme-2020-0013

Mots clésgear, shaping pattern, toothed hyperboloid tool, profile, generating edge

© 2020 Vorontsov Boris et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
gear, shaping pattern, toothed hyperboloid tool, profile, generating edge