Accès libre

Effect of Machine Feed Rate on Kerf-Width, Material Removal Rate, and Surface Roughness in Machining of Al/SiC Composite Material with Wire Electrical Discharge Machine

Manoj Modi

Manoj Modi

Department of Mechanical Engineering, Acropolis Institute of Technology and ResearchIndore, India
Recherchez cet auteur sur
Sciendo|Google Scholar
Modi, Manoj
, 
Gopal Agarwal

Gopal Agarwal

Department of Mechanical Engineering, Malaviya National Institute of TechnologyJaipur, India
Recherchez cet auteur sur
Sciendo|Google Scholar
Agarwal, Gopal
, 
Swati D Chaugaonkar

Swati D Chaugaonkar

Department of Mechanical Engineering, Shri Govindram Seksaria Institute of Technology and ScienceIndore, India
Recherchez cet auteur sur
Sciendo|Google Scholar
Chaugaonkar, Swati D
, 
Umesh Bhatia

Umesh Bhatia

Department of Mechanical Engineering, Acropolis Institute of Technology and ResearchIndore, India
Recherchez cet auteur sur
Sciendo|Google Scholar
Bhatia, Umesh
 et 
Veerendra Patil

Veerendra Patil

Department of Mechanical Engineering, Acropolis Institute of Technology and ResearchIndore, India
Recherchez cet auteur sur
Sciendo|Google Scholar
Patil, Veerendra
  
13 mai 2020
Effect of Machine Feed Rate on Kerf-Width, Material Removal Rate, and Surface Roughness in Machining of Al/SiC Composite Material with Wire Electrical Discharge Machine's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 13 mai 2020
Pages: 81 - 88
DOI: https://doi.org/10.2478/scjme-2020-0008
Mots clés
© 2020 Manoj Modi et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Langue:
Anglais
Périodicité:
2 fois par an
Sujets de la revue:
Ingénierie, Génie mécanique, Fondamentaux du génie mécanique, Mécanique
RSS Feed de la revue