<abstract xml:lang="en" xmlns="http://www.w3.org/1999/xhtml"><p>Cobalt ferrite (CoFe2O4) was synthesized using sol-gel techniques from cobalt nitrate: iron nitrate: polyvinyl alcohol (PVA) gel in a ratio of 1:2:12. Variations in the amount of PVA in water (5 %, 10 % and 15 %) influenced the crystallite size and phases of the ferrite products, which in turn controlled their magnetic properties. X-ray diffraction studies indicated single phase CoFe2O4 with larger crystallite size and with the hysteresis loops displaying an increase in both coercive field and squareness as the PVA content was increased. Differential scanning calorimetry (DSC) showed that desorption of water and combustion of excess gel were clearly observed in CoFe2O4 prepared from 10 % and 15 % PVA in water. In the case of 5 % PVA in water, two other ratios of cobalt nitrate: iron nitrate: PVA solution were also tested and it was found that the 1:2:10 ratio led to the smallest coercive field and squareness.</p></abstract>

Cobalt ferrite (CoFe2O4) was synthesized using sol-gel techniques from cobalt nitrate: iron nitrate: polyvinyl alcohol (PVA) gel in a ratio of 1:2:12. Variations in the amount of PVA in water (5 %, 10 % and 15 %) influenced the crystallite size and phases of the ferrite products, which in turn controlled their magnetic properties. X-ray diffraction studies indicated single phase CoFe2O4 with larger crystallite size and with the hysteresis loops displaying an increase in both coercive field and squareness as the PVA content was increased. Differential scanning calorimetry (DSC) showed that desorption of water and combustion of excess gel were clearly observed in CoFe2O4 prepared from 10 % and 15 % PVA in water. In the case of 5 % PVA in water, two other ratios of cobalt nitrate: iron nitrate: PVA solution were also tested and it was found that the 1:2:10 ratio led to the smallest coercive field and squareness.

Structural and magnetic properties of cobalt ferrites synthesized using sol-gel techniques

Molecular Technology Research Unit, School of Science, Walailak University, Nakhon Si Thammarat, 80161, Thailand

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Cobalt ferrite (CoFe2O4) was synthesized using sol-gel techniques from cobalt nitrate: iron nitrate: polyvinyl alcohol (PVA) gel in a ratio of 1:2:12....

Structural and magnetic properties of cobalt ferrites synthesized using sol-gel techniques

Publié en ligne: 14 sept. 2012

Pages: 278 - 281

DOI: https://doi.org/10.2478/s13536-012-0035-y

Mots clés
cobalt ferrites, sol-gel method, XRD, DSC, hysteresis loops

© 2012 Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Structural and magnetic properties of cobalt ferrites synthesized using sol-gel techniques

Publié en ligne: 14 sept. 2012

Pages: 278 - 281

DOI: https://doi.org/10.2478/s13536-012-0035-y

Mots cléscobalt ferrites, sol-gel method, XRD, DSC, hysteresis loops

© 2012 Wroclaw University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
cobalt ferrites, sol-gel method, XRD, DSC, hysteresis loops