<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>A standardized device with a volume of 1 m<sup>3</sup> or 20 L is used to determine explosion parameters. An explosion chamber where explosion takes place is of a spherical or cylindrical shape that suits the shape of a cubic container. In the case of a cylindrical vessel, the diameter and depth of the vessel are 1: 1. In this case, it is a spherical vessel with a volume of 365 liters. Time parameters of the disperser in the spherical vessel are compared with those of a truncated spherical vessel with a volume of 291 liters. Comparison of the measurement results showed that the optimal delay time of the explosion chamber with a volume of 291 liters is 290 ms, while the delay time of the explosion chamber with a volume of 365 liters is 350 ms.</p>
</abstract>

A standardized device with a volume of 1 m3 or 20 L is used to determine explosion parameters. An explosion chamber where explosion takes place is of a spherical or cylindrical shape that suits the shape of a cubic container. In the case of a cylindrical vessel, the diameter and depth of the vessel are 1: 1. In this case, it is a spherical vessel with a volume of 365 liters. Time parameters of the disperser in the spherical vessel are compared with those of a truncated spherical vessel with a volume of 291 liters. Comparison of the measurement results showed that the optimal delay time of the explosion chamber with a volume of 291 liters is 290 ms, while the delay time of the explosion chamber with a volume of 365 liters is 350 ms.

Influence of Explosion Chamber Shape on Timing Parameters of Disperser

Slovak University Of Technology In Bratislava

Faculty Of Materials Science And Technology In Trnava, Institute Of Integrated Safety

Research Papers Faculty of Materials Science and Technology Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Influence of Explosion Chamber Shape on Timing Parameters of Disperser"}

A standardized device with a volume of 1 m3 or 20 L is used to determine explosion parameters. An explosion chamber where explosion takes place is of a...

Influence of Explosion Chamber Shape on Timing Parameters of Disperser

Publié en ligne: 05 août 2021

Pages: 143 - 148

Reçu: 28 avr. 2021

Accepté: 21 mai 2021

DOI: https://doi.org/10.2478/rput-2021-0015

Mots clés
Explosion chamber, dispersed dust, disperser, timing parameters

© 2021 Zuzana Szabová et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Influence of Explosion Chamber Shape on Timing Parameters of Disperser

Publié en ligne: 05 août 2021

Pages: 143 - 148

Reçu: 28 avr. 2021

Accepté: 21 mai 2021

DOI: https://doi.org/10.2478/rput-2021-0015

Mots clésExplosion chamber, dispersed dust, disperser, timing parameters

© 2021 Zuzana Szabová et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
Explosion chamber, dispersed dust, disperser, timing parameters