<abstract xmlns="http://www.w3.org/1999/xhtml"><p>An important point in Tribology is mechanical-dynamic testing of lubricants and materials under stress and the interpretation of the results obtained therefrom. Widely-used test methods are often applied to test the performance of lubricants e.g. test results determined by tribometers should be treated carefully when using marketable oils. A closer evaluation of these results is part of this research paper. Within this study, several marketable oils were used and experimentally investigated. These were a gear oil, two engine oils, one hydraulic oil, one metal working fluid and one forming oil. There were several distinct differences. On the one hand, the used oils differ significantly in terms of their performance in the individual test methods. This is not surprising but has a clear reason in the different compositions of the lubricants resulting from their respective application. By subjecting these oils to diverse test methods with different test equipment, the results can vary widely and result in completely dissimilar results from the tests. Thus, a metalworking oil appears excellently when determining the welding force in the four-ball apparatus. In the high frequency liear oscillation tester, on the other hand, barely usable results are generated. Thus, there are two contradictory statements that should be the same.</p></abstract>

An important point in Tribology is mechanical-dynamic testing of lubricants and materials under stress and the interpretation of the results obtained therefrom. Widely-used test methods are often applied to test the performance of lubricants e.g. test results determined by tribometers should be treated carefully when using marketable oils. A closer evaluation of these results is part of this research paper. Within this study, several marketable oils were used and experimentally investigated. These were a gear oil, two engine oils, one hydraulic oil, one metal working fluid and one forming oil. There were several distinct differences. On the one hand, the used oils differ significantly in terms of their performance in the individual test methods. This is not surprising but has a clear reason in the different compositions of the lubricants resulting from their respective application. By subjecting these oils to diverse test methods with different test equipment, the results can vary widely and result in completely dissimilar results from the tests. Thus, a metalworking oil appears excellently when determining the welding force in the four-ball apparatus. In the high frequency liear oscillation tester, on the other hand, barely usable results are generated. Thus, there are two contradictory statements that should be the same.

Problems with Tribological Testings of Marketable Oils Using Laboratory Model Test Rigs

Steinbeis-Transferzentrum An Der Hochschule Mannheim

Slovak University of Technology in Bratislava

Faculty of Materials Science and Technology in Trnava, Institute of Production Technologies

Research Papers Faculty of Materials Science and Technology Slovak University of Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

An important point in Tribology is mechanical-dynamic testing of lubricants and materials under stress and the interpretation of the results obtained...

Problems with Tribological Testings of Marketable Oils Using Laboratory Model Test Rigs

Publié en ligne: 04 oct. 2018

Pages: 35 - 46

Reçu: 14 mai 2018

Accepté: 25 juin 2018

DOI: https://doi.org/10.2478/rput-2018-0004

Mots clés
Lubricants, base oil, additives, mechanical testing, tribological test rig

© 2018 Jürgen Rigo et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Problems with Tribological Testings of Marketable Oils Using Laboratory Model Test Rigs

Publié en ligne: 04 oct. 2018

Pages: 35 - 46

Reçu: 14 mai 2018

Accepté: 25 juin 2018

DOI: https://doi.org/10.2478/rput-2018-0004

Mots clésLubricants, base oil, additives, mechanical testing, tribological test rig

© 2018 Jürgen Rigo et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Mots clés
Lubricants, base oil, additives, mechanical testing, tribological test rig