<abstract xmlns="http://www.w3.org/1999/xhtml">The purpose of the current paper is to raise awareness on the behaviour of rectangular reinforced concrete columns with disproportionate cross-section dimensions subjected to compression and biaxial bending, considering the fact that in the current structural design process, the design of columns is usually done with respect to each of the two principal directions without considering their combined effect.The paper is based on a case study regarding a building that is currently in the design phase, in which to obtain a correct seismic behaviour, rectangular columns with disproportionate cross-section dimensions were used.The design of both the building and the columns follows the Romanian seismic design codes (“P100-1/2013 - Seismic design code - Part 1 - Design provisions for buildings” and “SR-EN 1998/2004 - Design of structures for earthquake resistance”).Results were compared and conclusions were drawn based on the interaction curves and interaction surfaces computed with expressions from specialized literature and sectional analysis software.</abstract>

The purpose of the current paper is to raise awareness on the behaviour of rectangular reinforced concrete columns with disproportionate cross-section dimensions subjected to compression and biaxial bending, considering the fact that in the current structural design process, the design of columns is usually done with respect to each of the two principal directions without considering their combined effect.The paper is based on a case study regarding a building that is currently in the design phase, in which to obtain a correct seismic behaviour, rectangular columns with disproportionate cross-section dimensions were used.The design of both the building and the columns follows the Romanian seismic design codes (“P100-1/2013 - Seismic design code - Part 1 - Design provisions for buildings” and “SR-EN 1998/2004 - Design of structures for earthquake resistance”).Results were compared and conclusions were drawn based on the interaction curves and interaction surfaces computed with expressions from specialized literature and sectional analysis software.

Behaviour of Rectangular Reinforced Concrete Columns with Disproportionate Cross-Section Dimensions Subjected to Compression and Biaxial Bending - Case Study

Technical University of Civil Engineering Bucharest

Romanian Journal of Transport Infrastructure

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The purpose of the current paper is to raise awareness on the behaviour of rectangular reinforced concrete columns with disproportionate cross-section...

Behaviour of Rectangular Reinforced Concrete Columns with Disproportionate Cross-Section Dimensions Subjected to Compression and Biaxial Bending - Case Study

Publié en ligne: 10 déc. 2020

Pages: 94 - 107

DOI: https://doi.org/10.2478/rjti-2020-0006

Mots clés
Reinforced concrete structures, Disproportionate sections, Compression, Biaxial bending

© 2020 Savu Adrian-Alexandru, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Behaviour of Rectangular Reinforced Concrete Columns with Disproportionate Cross-Section Dimensions Subjected to Compression and Biaxial Bending - Case Study

Publié en ligne: 10 déc. 2020

Pages: 94 - 107

DOI: https://doi.org/10.2478/rjti-2020-0006

Mots clésReinforced concrete structures, Disproportionate sections, Compression, Biaxial bending

© 2020 Savu Adrian-Alexandru, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
Reinforced concrete structures, Disproportionate sections, Compression, Biaxial bending