Design Criteria for Scantling of Longitudinal and Transverse Connections in the Torsion Box Under Fatigue Loading

1. W. Fricke, A. Von Lileienfeld-Toal, and H. Paetzoldt, “Fatigue strength investigations of welded details of stiffened plate structures in steel ships,” International Journal of Fatigue, vol. 34(1), pp. 17–26, 2012. doi: 10.1016/j.ijfatigue.2011.01.021.Open DOISearch in Google Scholar

2. J. Kuniala, “Fatigue Analysis of 3-Dimensional Ship Structural Detail,” Aalto University School of Engineering. Thesis for the degree of Master of Science in Technology, 2016.Search in Google Scholar

3. W. Fricke, “Fatigue analysis of welded joints: state of development,” Marine Structures, vol. 16(3), pp. 185–200, 2003. doi: 10.1016/S0951-8339(02)00075-8.Open DOISearch in Google Scholar

4. W. Fricke, O. Doerk, and C. Weissenbord, “Comparison of different calculation methods for structural stresses at welded joints,” International Journal of Fatigue, vol. 25(5), pp. 359–369, 2003. doi: 10.1016/S0142-1123(02)00167-6.Open DOISearch in Google Scholar

5. W. Fricke and H. Paetzold, “Full-scale fatigue tests of ship structures to validate the S-N approaches for fatigue strength assessment,” Marine Structures, vol. 23(1), pp. 115–130, 2010. doi: 10.1016/j.marstruc.2010.01.004.Open DOISearch in Google Scholar

6. I. Lotsberg, “Fatigue design of plated structures using finite element analysis,” Ships and Offshore Structures, vol. 1(1), pp. 45–54, 2006. doi: 10.1533/saos.2005.0006.Open DOISearch in Google Scholar

7. W. Fricke, “Recent developments and future challenges in fatigue strength assessment of welded joints,” Proc Inst Mech Eng C J Mech Eng Sci., vol. 229(7), pp. 1224–1239, 2014. doi: 10.1177/0954406214550015.Open DOISearch in Google Scholar

8. K. Tran Nguyen, Y. Garbatov, and C. Guedes Soares, “Fatigue damage assessment of corroded oil tanker details based on global and local stress approaches,” International Journal of Fatigue, vol. 43, pp. 197–206, 2012. doi: 10.1016/j.ijfatigue.2012.04.004.Open DOISearch in Google Scholar

9. M. Aygül, “Fatigue Analysis of Welded Structures Using the Finite Element Method,” Thesis for the Degree of Licenciate of Engineering. Chalmers University of Technology, 2012.Search in Google Scholar

10. I. Poutiainen, P. Tanskanen, and G. Marquis, “Finite element methods for structural hot spot stress determination - a comparison of procedures,” International Journal of Fatigue, vol. 26(11), pp. 1147–1157, 2004. doi: 10.1016/j.ijfatigue.2004.04.003.Open DOISearch in Google Scholar

11. Z. Wang, “Fatigue Behavior and Failure Assessment of Plate Connections in Ship Shaped Structures,” PhD thesis. National University of Singapore, 2008.Search in Google Scholar

12. H. M. Westergaard, “Bearing Pressures and Cracks,” Journal of Applied mechanics, vol. 6, pp. A49–53, 1939.10.1115/1.4008919Search in Google Scholar

13. G. R. Irwin, “Analysis of stresses and strains near the end of a crack traversing a plate,” Journal of Applied mechanics, vol. 24, pp. 361–364, 1957.10.1115/1.4011547Search in Google Scholar

14. M. L. Williams, “On the Stress Distribution at the Base of a Stationary Crack,” Journal of Applied mechanics, vol. 24(1), pp. 109–114, 1956.10.1115/1.4011454Search in Google Scholar

15. F. Erdogan and G. C. Sih, “On the crack extension in plates under plane loading and transverse shear,” Journal of basic Engineering, vol. 85(4), pp. 519–527, 1963. doi: 10.1115/1.3656897.Open DOISearch in Google Scholar

16. M. Hussain, S. Pu, and J. Underwood, “Strain energy release rate for a crack under combined mode I and mode II,” Proceedings of the 1973 National Symposium on Fracture Mechanics, Part II (ASTM International), pp. 2–28, 1974. doi: 10.1520/STP33130S.Open DOISearch in Google Scholar

17. M. Chafi and A. Boulenouar, “A Numerical Modelling of Mixed Mode Crack Initiation and Growth in Functionally Graded Materials,” Materials Research, vol. 22(3), pp. e20180701, 2019. doi : 10.1590/1980-5373-mr-2018-0701Open DOISearch in Google Scholar

18. A. Carpinteri, “Stress-singularity and generalized fracture toughness at the vertex of re-entrant corners,” Engineering Fracture Mechanics, vol. 26(1), pp. 143–155, 1987. doi: 10.1016/0013-7944(87)90086-5.Open DOISearch in Google Scholar

19. M. Strandberg, “Fracture at V-notches with contained plasticity,” Engineering Fracture Mechanics, vol. 69(3), pp. 403–415, 2002. doi: 10.1016/S0013-7944(01)00079-0.Open DOISearch in Google Scholar

20. J. D. Carroll, W. Abuzaid, J. Lambros, and H. Sehitoglu, “ High resolution digital image correlation measurements of strain accumulation in fatigue crack growth,” International Journal of Fatigue, vol. 57, pp. 140–150, 2013. https://doi.org/10.1016/j.ijfatigue.2012.06.010.10.1016/j.ijfatigue.2012.06.010Search in Google Scholar

21. J. Blaber, B. Adair, and A. Antoniou, “NCorr: Open-Source 2D Digital Image Correlation Matlab Software,” Experimental Mechanics, vol. 55, pp. 1105–1122, 2015. doi: 10.1007/s11340-015-0009-1.Open DOISearch in Google Scholar

22. R. Branco, F. V. Antunes, J. A. Martins Ferreira, and J. M. Silva, “Determination of Paris law constants with a reverse engineering technique,” Engineering Failure Analysis, vol. 16, pp. 631–638, 2009. doi: 10.1016/j.engfailanal.2008.02.004.Open DOISearch in Google Scholar

23. I. Galic, I. Cular, V. Kresimir, and Z. Tonkovic, “Comparison of SIF solutions obtained by XFEM and conventional FEM or cracks in complex geometries like valve body,” Procedia Structural Integrity, vol. 13, pp. 2109–2113, 2018. doi: 10.1016/j.prostr.2018.12.200.Open DOISearch in Google Scholar

24. N. Möes, J. Dolbow, and T. Belytschko, “A finite element method for crack growth without remeshing,” International Journal for Numerical Methods in Engineering, vol. 46, pp. 131–150, 1999. doi: 10.1002/(sici)1097-0207(19990910)46:1%3c131::aidnme726%3e3.0.co;2-j.Open DOISearch in Google Scholar

POLISH MARITIME RESEARCH, No 2/2021 126Search in Google Scholar

25. F. Zhou, J. Molinari, and Y. Li, “Three-dimensional numerical simulations of dynamic fracture in silicon carbide reinforced aluminium,” Engineering Fracture Mechanics, vol. 71, pp. 1357–1378, 2004. doi: https://doi.org/10.1016/S0013-7944(03)00168-1.10.1016/S0013-7944(03)00168-1Search in Google Scholar

26. A. O. Ayhan, “Three-dimensional fracture analysis using tetrahedral enriched elements and fully unstructured mesh,” International Journal of Solids and Structures, vol. 48, pp. 492–505, 2011. doi: https://doi.org/10.1016/j.ijsolstr.2010.10.012.10.1016/j.ijsolstr.2010.10.012Search in Google Scholar

27. W. Huang, Y. Garbatov, and C. Guedes Soares, “Fatigue reliability assessment of a complex welded structure subjected to multiple cracks,” Engineering Structures, vol. 56, pp. 868–879, 2013. doi: https://doi.org/10.1016/j.engstruct.2013.06.01110.1016/j.engstruct.2013.06.011Search in Google Scholar

28. T. Ulleland and M. Svensson, “Stress Concentration Factors in Side Shells Longitudinals Connected to Transverse Webframes,” Proceedings of the Eleventh International Offshore and Polar Engineering Conference, 2001.Search in Google Scholar

29. M. S. Vidhya and K. V. M. Christina, “Fatigue Life, Fatigue Damage, Fatigue Factor of Safety, Fatigue Sensitivity, Biaxiality Indication and Equivalent Stress of a Radial Connecting Rod,” International Research Journal of Engineering and Technology, vol. 7(9), pp. 1499–1502, 2020.Search in Google Scholar

30. H. R. Wasmi, M. Q. Abdullah, and O. A. Jassim, “Testing and Estimation Fatigue Life of a Flange Connection used in Power Plant by ANSYS,” International Journal of Current Engineering and Technology, vol. 6(4), pp. 1302–1306, 2006.Search in Google Scholar

31. A. Bhanage and K. Padmanabhan, “Design for fatigue and simulation of glass fibre/epoxy composite automobile leaf spring,” ARPN Journal of Engineering and Applied Sciences, vol. 9(3), pp. 196, 2014.Search in Google Scholar

32. P. C. Paris and F. Erdogan, “A critical analysis of crack propagation laws,” Journal of Basic Engineering, vol. 85 (4), pp. 528–534, 1963. doi: 10.1115/1.3656900.Open DOISearch in Google Scholar

33. N. Perez, Fracture Mechanics. Springer US, 2004.Search in Google Scholar

34. M. Mlikota, S. Staib, S. Schmauder, and Z. Bozic, “Numerical determination of Paris law constants for carbon steel using a two-scale model,” Journal of Physics: Conference Series, vol. 843, pp. 012042, 2017. doi: 10.1088/1742-6596/843/1/012042.Open DOISearch in Google Scholar