[1. M. Alonso-Martinez, J.M. Adam, F.P. Alvarez-Rabanal and J.J. del Coz Díaz. ‘Wind turbine tower collapse due to flange failure: FEM and DOE analyses’, Engineering Failure Analysis. 2019, 104:932–49. doi: 10.1016/j.engfailanal.2019.06.045.10.1016/j.engfailanal.2019.06.045]Search in Google Scholar
[2. X. Yang, X. Zeng, X. Wang, J. Berrila and X. Li. ‘Performance and bearing behavior of monopile-friction wheel foundations under lateral-moment loading for offshore wind turbines’, Ocean Engineering. 2019, 184:159–72. doi: 10.1016/j. oceaneng.2019.05.043.10.1016/j.oceaneng.2019.05.043]Search in Google Scholar
[3. Z. Liu and L. Zhang. ‘A review of failure modes, condition monitoring and fault diagnosis methods for large-scale wind turbine bearings’, Measurement. 2020, 149:107002. doi: 10.1016/j.measurement.2019.107002.10.1016/j.measurement.2019.107002]Search in Google Scholar
[4. J. Chróścielewski, M. Miśkiewicz, Ł. Pyrzowski and K. Wilde. ‘Composite GFRP U-Shaped Footbridge’, Polish Maritime Research. 2017, 24:25–31. doi: 10.1515/pomr-2017-0017.10.1515/pomr-2017-0017]Search in Google Scholar
[5. Ł. Pyrzowski. ‘Testing contraction and thermal expansion coefficient of construction and moulding polymer composites’, Polish Maritime Research. 2018, 25:151–8. doi: 10.2478/pomr-2018-0036.10.2478/pomr-2018-0036]Search in Google Scholar
[6. N. Kharghani and C. Guedes Soares. ‘Experimental and numerical study of hybrid steel-FRP balcony overhang of ships under shear and bending’, Marine Structures. 2018, 60:15–33. doi: 10.1016/j.marstruc.2018.03.003.10.1016/j.marstruc.2018.03.003]Search in Google Scholar
[7. C.M. Wang, T.Y. Wu, Y.S. Choo, K.K. Ang, A.C. Toh, WY. Mao et al. ‘Minimizing differential deflection in a pontoon-type, very large floating structure via gill cells’, Marine Structures. 2006, 19:70–82. doi: 10.1016/j.marstruc.2006.06.002.10.1016/j.marstruc.2006.06.002]Search in Google Scholar
[8. Y.G. Cao and S.H. Zhang. ‘Failure analysis of a pinion of the jacking system of a jack-up platform’, Engineering Failure Analysis. 2013, 33:212–21. doi: 10.1016/j. engfailanal.2013.05.018.10.1016/j.engfailanal.2013.05.018]Search in Google Scholar
[9. H. Qin, L. Mu, W. Tang and Z. Hu. ‘Numerical study on structural response of anti-sloshing baffles of different configurations in a sloshing tank considering hydroelasticity’, Ocean Engineering. 2019, 188:106290. doi: 10.1016/j. oceaneng.2019.106290.10.1016/j.oceaneng.2019.106290]Search in Google Scholar
[10. A. Tatsumi and M. Fujikubo. ‘Ultimate strength of container ships subjected to combined hogging moment and bottom local loads part 1: Nonlinear finite element analysis’, Marine Structures. 2020, 69:102683. doi: 10.1016/j. marstruc.2019.102683.10.1016/j.marstruc.2019.102683]Search in Google Scholar
[11. Ł. Pyrzowski, M. Miśkiewicz and J. Chróścielewski. ‘The effect of fishing basin construction on the behaviour of a footbridge over the port channel’, Polish Maritime Research. 2017, 24:182–7. doi: 10.1515/pomr-2017-0037.10.1515/pomr-2017-0037]Search in Google Scholar
[12. M. Miśkiewicz, Ł. Pyrzowski, K. Wilde and O. Mitrosz. ‘Technical monitoring system for a new part of Gdańsk deepwater container terminal,’ Polish Maritime Research. 2017, 24:149–55. doi: 10.1515/pomr-2017-0033.10.1515/pomr-2017-0033]Search in Google Scholar
[13. M. Sondej, C. Ratnayake and M. Wójcik. ‘Economical and safe method of granular material storage in silos in offshore port terminals’, Polish Maritime Research. 2018, 25:62–8. doi: 10.2478/pomr-2018-0097.10.2478/pomr-2018-0097]Search in Google Scholar
[14. H. Jeong and W.J. Shim. ‘Calculation of boil-off gas (BOG) generation of KC-1 membrane LNG tank with high density rigid polyurethane foam by numerical analysis’, Polish Maritime Research. 2017, 24:100–14. doi: 10.1515/pomr-2017-0012.10.1515/pomr-2017-0012]Search in Google Scholar
[15. M. Miśkiewicz, J. Chróścielewski, B. Sobczyk, Ł. Pyrzowski and K. Wilde. ‘Verification of rafter strenghtening in the gas tank roof’, Proceedings of the 27th Conference on Structural Failures, Szczecin-Międzyzdroje. 2015, p. 253–60.]Search in Google Scholar
[16. Saipem S.P.A. Detailed design of roof framing for LNG tanks package LNG tank TK-2011 and TK-2012. 2012.]Search in Google Scholar
[17. Dassault Systèmes Simulia Corp. Abaqus 6.14 Documentation, Dassault Systèmes, Providence, RI, USA, 2014.]Search in Google Scholar
[18. M.G. Larson and F. Bengzon. The finite element method: Theory, implementation, and applications. vol. 10. Berlin, Heidelberg: Springer Berlin Heidelberg. 2013. doi: 10.1007/978-3-642-33287-6.10.1007/978-3-642-33287-6]Search in Google Scholar