<abstract xmlns="http://www.w3.org/1999/xhtml">

Seawater Desalination uses hydrophobic membranes. Many techniques have been developed to improve membrane hydrophobicity by depositing particles on the membrane surface. In this study, a nanocomposite membrane utilizing Triethylenetetramine (TETA) is suggested. The membrane incorporates Multiwalled Carbon Nanotubes (MWCNT) in conjunction with Triethylenetetramine Dihydrochloride (TETA-DH). In water bath, different percentages of TETA-DH films are formed. Electro-spin fabrication of MWCNTs using TETA-DH yields smooth, low-pore membranes. Membranes and their characteristics are identified by contact angle, layer thickness, and conductivity measurements. Membrane performance is examined for heat flux and salt rejection. Compared to commercial membranes, the proposed membrane exhibits superior antifouling and anti-wetting features. The membrane exhibited permeation and rejection ratio of 46 Kg m2 h−1 and 99.99% respectively which is superior as compared with other membranes. The hydrophilic Surface Modifying Macromolecules percentage (LSMM%) is evaluated because it depends on average pore size, hydrophobicity, surface porosity, and shape. The tests demonstrate the excellent performance of the proposed membrane for controlling membrane fouling.
</abstract>

Seawater Desalination uses hydrophobic membranes. Many techniques have been developed to improve membrane hydrophobicity by depositing particles on the membrane surface. In this study, a nanocomposite membrane utilizing Triethylenetetramine (TETA) is suggested. The membrane incorporates Multiwalled Carbon Nanotubes (MWCNT) in conjunction with Triethylenetetramine Dihydrochloride (TETA-DH). In water bath, different percentages of TETA-DH films are formed. Electro-spin fabrication of MWCNTs using TETA-DH yields smooth, low-pore membranes. Membranes and their characteristics are identified by contact angle, layer thickness, and conductivity measurements. Membrane performance is examined for heat flux and salt rejection. Compared to commercial membranes, the proposed membrane exhibits superior antifouling and anti-wetting features. The membrane exhibited permeation and rejection ratio of 46 Kg m2 h−1 and 99.99% respectively which is superior as compared with other membranes. The hydrophilic Surface Modifying Macromolecules percentage (LSMM%) is evaluated because it depends on average pore size, hydrophobicity, surface porosity, and shape. The tests demonstrate the excellent performance of the proposed membrane for controlling membrane fouling.

Preparation of Nano Membranes with Triethylenetetramine Dihydrochloride (TETA-DH) and Multiwalled Carbon Nanotubes (MWCNT) for Seawater Desalination

Department of Chemical Engineering Technology

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution 4.0 International License.

Seawater Desalination uses hydrophobic membranes. Many techniques have been developed to improve membrane hydrophobicity by depositing particles on the...

Preparation of Nano Membranes with Triethylenetetramine Dihydrochloride (TETA-DH) and Multiwalled Carbon Nanotubes (MWCNT) for Seawater Desalination

Publié en ligne: 12 juil. 2024

Pages: 1 - 7

DOI: https://doi.org/10.2478/pjct-2024-0011

Mots clés
Multiwalled carbon nanotubes (MWCNT), Triethylenetetramine dihydrochloride (TETA-DH), Contact angle, Foulant layer thickness

© 2024 Ahmed Alghamdi, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Preparation of Nano Membranes with Triethylenetetramine Dihydrochloride (TETA-DH) and Multiwalled Carbon Nanotubes (MWCNT) for Seawater Desalination

Publié en ligne: 12 juil. 2024

Pages: 1 - 7

DOI: https://doi.org/10.2478/pjct-2024-0011

Mots clésMultiwalled carbon nanotubes (MWCNT), Triethylenetetramine dihydrochloride (TETA-DH), Contact angle, Foulant layer thickness

© 2024 Ahmed Alghamdi, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
Multiwalled carbon nanotubes (MWCNT), Triethylenetetramine dihydrochloride (TETA-DH), Contact angle, Foulant layer thickness