<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In the paper, YSZ coatings were prepared on nickel-based alloy substrates by anodic electrophoretic deposition. The YSZ suspension solution was obtained under stirring and ultrasonic treatment, in which the anhydrous ethanol and acetylacetone were used as the dispersion medium and ammonium polyacrylate was used as the dispersant of the suspension. The effects of different deposition voltage and deposition time on YSZ coating were investigated. Meantime, the microstructure of the coating surface was observed by metallographic microscope. It was found that the high-quality YSZ coating could be obtained by deposition at 60 V for 2–3 min. Finally, the effect of sintering temperature on coating quality was investigated by X-ray diffractometer and scanning electron microscopy. The results showed that the YSZ coating bonded closely with the substrate after sintering at 1200 <sup>o</sup>C, and the porosity of the YSZ coating increased after sintering</p>
</abstract>

In the paper, YSZ coatings were prepared on nickel-based alloy substrates by anodic electrophoretic deposition. The YSZ suspension solution was obtained under stirring and ultrasonic treatment, in which the anhydrous ethanol and acetylacetone were used as the dispersion medium and ammonium polyacrylate was used as the dispersant of the suspension. The effects of different deposition voltage and deposition time on YSZ coating were investigated. Meantime, the microstructure of the coating surface was observed by metallographic microscope. It was found that the high-quality YSZ coating could be obtained by deposition at 60 V for 2–3 min. Finally, the effect of sintering temperature on coating quality was investigated by X-ray diffractometer and scanning electron microscopy. The results showed that the YSZ coating bonded closely with the substrate after sintering at 1200 oC, and the porosity of the YSZ coating increased after sintering

Fabrication of YSZ coatings on nickel-based alloys by anodic electrophoretic deposition

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution 4.0 International License.

In the paper, YSZ coatings were prepared on nickel-based alloy substrates by anodic electrophoretic deposition. The YSZ suspension solution was obtained under...

Fabrication of YSZ coatings on nickel-based alloys by anodic electrophoretic deposition

Publié en ligne: 29 mars 2023

Pages: 8 - 11

DOI: https://doi.org/10.2478/pjct-2023-0002

Mots clés
YSZ coating, anodic electrophoretic deposition, suspension solution, nickel-based alloys

© 2023 Yuan Binxia et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Fabrication of YSZ coatings on nickel-based alloys by anodic electrophoretic deposition

Publié en ligne: 29 mars 2023

Pages: 8 - 11

DOI: https://doi.org/10.2478/pjct-2023-0002

Mots clésYSZ coating, anodic electrophoretic deposition, suspension solution, nickel-based alloys

© 2023 Yuan Binxia et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
YSZ coating, anodic electrophoretic deposition, suspension solution, nickel-based alloys