<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The aim of the study was to relate the influence of the chemical composition, structure, and basic properties as hardness of the tested drill bits on resistance to their wear. The chemical composition of the drill bit was investigated using the electric excitation emission spectrometry method and EDS microanalysis. Metallographic specimens were prepared and observed to determine the structure of each tool. Hardness tests were carried out on the shank and the working part of the tools. Material wear tests were carried out on the basis of measuring the wear of the drill bit flank. It has been shown that the appropriate selection of the chemical composition and heat treatment has a significant impact on the wear resistance of cutting tools, which directly translates into their quality.</p>
</abstract>

The aim of the study was to relate the influence of the chemical composition, structure, and basic properties as hardness of the tested drill bits on resistance to their wear. The chemical composition of the drill bit was investigated using the electric excitation emission spectrometry method and EDS microanalysis. Metallographic specimens were prepared and observed to determine the structure of each tool. Hardness tests were carried out on the shank and the working part of the tools. Material wear tests were carried out on the basis of measuring the wear of the drill bit flank. It has been shown that the appropriate selection of the chemical composition and heat treatment has a significant impact on the wear resistance of cutting tools, which directly translates into their quality.

Determination of twist drill bits wear: the effect of the composition and structure of the steels

Faculty of Civil Engineering, Mechanics and Petrochemistry

Department of Chemical Engineering and Equipment

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution 4.0 International License.

The aim of the study was to relate the influence of the chemical composition, structure, and basic properties as hardness of the tested drill bits on...

Determination of twist drill bits wear: the effect of the composition and structure of the steels

Publié en ligne: 16 oct. 2022

Pages: 8 - 13

DOI: https://doi.org/10.2478/pjct-2022-0016

Mots clés
drilling, high-speed tool steel, EDS, tool wear, microstructure

© 2022 Karol Prałat et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Determination of twist drill bits wear: the effect of the composition and structure of the steels

Publié en ligne: 16 oct. 2022

Pages: 8 - 13

DOI: https://doi.org/10.2478/pjct-2022-0016

Mots clésdrilling, high-speed tool steel, EDS, tool wear, microstructure

© 2022 Karol Prałat et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
drilling, high-speed tool steel, EDS, tool wear, microstructure