<abstract xmlns="http://www.w3.org/1999/xhtml">

Tar formation is a significant issue during biomass gasification. Catalytic removal of tars with the use of nickel catalyst allows to obtain high conversion rate but coke formation on catalysts surface lead to its deactivation. Toluene decomposition as a tar imitator was studied in gliding discharge plasma-catalytic system with the use of 5%, 10% and 15% by weight Ni and NiO catalyst on Al2O3 (α-Al2O3) and Peshiney (γ-Al2O3) carrier in gas composition similar to the gas after biomass pyrolysis. The optimal concentration of nickel was identified to be 10% by weight on Al2O3. It was stable in all studied initial toluene concentrations, discharge power while C7H8 conversion rate remained high – up to 82%. During the process, nickel catalysts were deactivated by sooth formation on the surface. On catalysts surface, toluene decomposition products were identified including benzyl alcohol and 3-hexen-2-one.
</abstract>

Tar formation is a significant issue during biomass gasification. Catalytic removal of tars with the use of nickel catalyst allows to obtain high conversion rate but coke formation on catalysts surface lead to its deactivation. Toluene decomposition as a tar imitator was studied in gliding discharge plasma-catalytic system with the use of 5%, 10% and 15% by weight Ni and NiO catalyst on Al2O3 (α-Al2O3) and Peshiney (γ-Al2O3) carrier in gas composition similar to the gas after biomass pyrolysis. The optimal concentration of nickel was identified to be 10% by weight on Al2O3. It was stable in all studied initial toluene concentrations, discharge power while C7H8 conversion rate remained high – up to 82%. During the process, nickel catalysts were deactivated by sooth formation on the surface. On catalysts surface, toluene decomposition products were identified including benzyl alcohol and 3-hexen-2-one.

Nickel catalyst in coupled plasma-catalytic system for tar removal

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Nickel catalyst in coupled plasma-catalytic system for tar removal"}

Tar formation is a significant issue during biomass gasification. Catalytic removal of tars with the use of nickel catalyst allows to obtain high conversion...

Nickel catalyst in coupled plasma-catalytic system for tar removal

Publié en ligne: 14 oct. 2021

Pages: 24 - 29

DOI: https://doi.org/10.2478/pjct-2021-0026

Mots clés
gliding discharge, plasma-catalytic system, tar decomposition, nickel catalyst

© 2021 Joanna Woroszył-Wojno et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Nickel catalyst in coupled plasma-catalytic system for tar removal

Publié en ligne: 14 oct. 2021

Pages: 24 - 29

DOI: https://doi.org/10.2478/pjct-2021-0026

Mots clésgliding discharge, plasma-catalytic system, tar decomposition, nickel catalyst

© 2021 Joanna Woroszył-Wojno et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Mots clés
gliding discharge, plasma-catalytic system, tar decomposition, nickel catalyst