<abstract xmlns="http://www.w3.org/1999/xhtml">

To make clear the feasibility and influence factors of diesel fuel autothermal reforming to hydrogen, PdCeCr- FeCu/Al2O3 catalyst was prepared by equivalent-volume impregnation method. Experimental facility based on an adiabatic tubular reactor with preheating section was designed and set up, the behaviors of diesel reforming to hydrogen with straight-run diesel as a raw material according to the analysis of the components were studied. Diesel oil reforming over a catalyst for hydrogen production was analyzed using an adiabatic tubular reactor with a preheating section that was designed and built in-house. The operating conditions were optimized. Under the suitable operating conditions, viz., catalyst bed inlet temperature of 700 °C, diesel liquid space velocity of 0.24 h−1, water-carbon ratio of 20, and oxygen-carbon ratio of 0.6, the hydrogen yield reached 28.3 (mol/mol).
</abstract>

To make clear the feasibility and influence factors of diesel fuel autothermal reforming to hydrogen, PdCeCr- FeCu/Al2O3 catalyst was prepared by equivalent-volume impregnation method. Experimental facility based on an adiabatic tubular reactor with preheating section was designed and set up, the behaviors of diesel reforming to hydrogen with straight-run diesel as a raw material according to the analysis of the components were studied. Diesel oil reforming over a catalyst for hydrogen production was analyzed using an adiabatic tubular reactor with a preheating section that was designed and built in-house. The operating conditions were optimized. Under the suitable operating conditions, viz., catalyst bed inlet temperature of 700 °C, diesel liquid space velocity of 0.24 h−1, water-carbon ratio of 20, and oxygen-carbon ratio of 0.6, the hydrogen yield reached 28.3 (mol/mol).

Autothermal Reforming of Diesel Oil for PdCeCrFeCu/Al2O3-Catalyzed Hydrogen Production

School of Pharmacy, Shenyang Medical College

Key Laboratory of Inorganic Molecule-Based Chemistry of Liaoning Province and Laboratory of Coordination Chemistry

Shenyang University of Chemical Technology

Polish Journal of Chemical Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Autothermal Reforming of Diesel Oil for PdCeCrFeCu/AlO-Catalyzed Hydrogen Production

To make clear the feasibility and influence factors of diesel fuel autothermal reforming to hydrogen, PdCeCr- FeCu/Al2O3 catalyst was prepared by...

Autothermal Reforming of Diesel Oil for PdCeCrFeCu/Al₂O₃-Catalyzed Hydrogen Production

Publié en ligne: 15 juil. 2021

Pages: 12 - 19

DOI: https://doi.org/10.2478/pjct-2021-0011

Mots clés
diesel, reform, hydrogen, catalyst

© 2021 Lin Lin et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Autothermal Reforming of Diesel Oil for PdCeCrFeCu/Al2O3-Catalyzed Hydrogen Production

Publié en ligne: 15 juil. 2021

Pages: 12 - 19

DOI: https://doi.org/10.2478/pjct-2021-0011

Mots clésdiesel, reform, hydrogen, catalyst

© 2021 Lin Lin et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Autothermal Reforming of Diesel Oil for PdCeCrFeCu/Al₂O₃-Catalyzed Hydrogen Production

Mots clés
diesel, reform, hydrogen, catalyst