Investigation of the thermal protection ablative properties of thermosetting composites with powder fillers: the corundum Al₂O₃ and the Carbon Powder C

1. Jackowski, A. (1986). Ablation fl at wall erosion under fl oating layer ablation [in polish]. Biuletyn WAT. 460(6), 23-33.Search in Google Scholar

2. Shyam Sunder, S. (2005, December). Federal Building andFire Safety Investigation of the World Trade Center Disaster:Final Report of the National Construction Safety Team on theCollapses of the World Trade Center Towers (NIST NCSTAR1). Retrieved Jun 12, 2006, from http://www.nist.gov/manuscript--publication-search.cfm?pub_id=909236Search in Google Scholar

3. Haack, A. (2004). Latest achievements and perspectives in tunnel safety. Tunn. Undergr. Space Technol. 19, 305. DOI: 10.1016/j.tust.2004.01.007.10.1016/j.tust.2004.01.007Open DOISearch in Google Scholar

4. Ono, K. & Otsuka, T. (2006). Fire design requirement forvarious tunnels. 32nd ITA - World Tunnel Congress, 22-27 April 2006. Seoul, Republic of Korea. Retrieved Jun 23, 2006, from www.ita2006.comSearch in Google Scholar

5. Kucharczyk, W. (2007). Shaping the thermal protectionablative properties of polymer composites with powder fi llers [in polish]. Unpublished doctoral dissertation, Technical University of Radom, Radom, Poland.Search in Google Scholar

6. Feng-Er, Y. (2004). Study on the ablation materials ofmodifi ed polyurethane/polysiloxane. Unpublished doctoral dissertation, National Sun Yat-sen University, Guangzhou, People Republic of China.Search in Google Scholar

7. Kucharczyk, W. (2010). Some ablative properties of epoxy composites used for thermoprotection [in polish]. Przem. Chem. 89, 1673-1676.Search in Google Scholar

8. Kucharczyk, W. (2012). Ablative and abrasive wear of phenolic-formaldehyde glass laminates with powder fi llers. Eksploat. Niezawod. 14, 11-17.Search in Google Scholar

9. Bahramian, A.R. & Kokabi, M. (2009). Ablation mechanism of polymer layered silicate nanocomposite heat shield. J.Hazard. Mater. 166, 445-454. DOI: 10.1016/j.jhazmat.2008.11.061.10.1016/j.jhazmat.2008.11.061Open DOISearch in Google Scholar

10. Dec, J.E. (2010). Three dimensional fi nite element ablativethermal response analysis applied to heatshield penetrationdesign. Unpublished doctoral dissertation, School of Aerospace Engineering, Atlanta, USA.Search in Google Scholar

11. Patton, R.D., Pittman, Jr. C.U., Wang, L., Hill, J.R. & Day, A. (2002). Ablation, mechanical and thermal conductivity properties of vapour grown carbon fi ber/phenolic matrix composites. Compos. Part A-Appl. S. 33, 243-251. DOI: 10.1016/S1359-835X(01)00092-6.10.1016/S1359-835X(01)00092-6Open DOISearch in Google Scholar

12. Park, J.K. & Kang, T.J. (2002). Thermal and ablative properties of low temperature carbon fi ber-phenol formaldehyde resin composites. Carbon. 40, 2125-2134. DOI: 10.1016/ S0008-6223(02)00063-5.10.1016/S0008-6223(02)00063-5Open DOISearch in Google Scholar

13. Liu, L., Li, H., Shi, X., Feng, W., Wang, Y. & Yao, D. (2013). Effects of SiC addition on the ablation properties of C/C composites in different heat fl uxes under oxyacetylene torch. Vacuum. 90, 97-99. DOI: 10.1016/j.vacuum.2012.09.025.10.1016/j.vacuum.2012.09.025Open DOISearch in Google Scholar

14. Suberlyak, O., Krasinskiy, V., Sikora, J. & Krzyżak, A. (2012). Ammonia-free, low-toxic press-materials with improved electroinsulating properties based on modifi ed novolak phenol-formaldehyde resin. Chem. and Chemical Technol. 6, 199-202.10.23939/chcht06.02.199Search in Google Scholar

15. Leszek, W. (1997). Empirical research. Some methodologicalissues [in polish] (1st ed.). Radom, Poland: Institute for Sustainable Technologies in Radom.Search in Google Scholar

16. Song, G.M., Zhou, Y. & Wang, Y-J. (2003). Effect of carbide particles on the ablation properties of tungsten composites. Mater. Charact. 50, 293-303. DOI: 10.1016/S1044-5803(03)00123-2.10.1016/S1044-5803(03)00123-2Open DOISearch in Google Scholar