<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This article presents an active current sensor (CS) fault-tolerant control (FTC) strategy for induction motor (IM) drive with adaptation of rotor and stator resistances. The stator current estimator with online adaptation of resistance parameters was applied for the reconstruction of missing current signals. A model reference adaptive system (MRAS), based on a neural network (NN), was used to estimate the rotor resistance. Additionally, stator resistance estimation was applied based on ratio index. The use of such a solution allowed for a significant increase in the quality of stator current reconstruction, which is particularly important for the design of CS fault detection (FD) and compensation algorithms. A wide range of simulation studies have been carried out for different operating conditions of the IM drive. The results showed that applying rotor and stator resistance estimation can improve the quality of stator current estimation by up to approximately 95% under rated operating point. The study was carried out for nominal and low speeds, with two, one, and without healthy CS.</p>
</abstract>

This article presents an active current sensor (CS) fault-tolerant control (FTC) strategy for induction motor (IM) drive with adaptation of rotor and stator resistances. The stator current estimator with online adaptation of resistance parameters was applied for the reconstruction of missing current signals. A model reference adaptive system (MRAS), based on a neural network (NN), was used to estimate the rotor resistance. Additionally, stator resistance estimation was applied based on ratio index. The use of such a solution allowed for a significant increase in the quality of stator current reconstruction, which is particularly important for the design of CS fault detection (FD) and compensation algorithms. A wide range of simulation studies have been carried out for different operating conditions of the IM drive. The results showed that applying rotor and stator resistance estimation can improve the quality of stator current estimation by up to approximately 95% under rated operating point. The study was carried out for nominal and low speeds, with two, one, and without healthy CS.

Active Current Sensor Fault-Tolerant Control of Induction Motor Drive with Online Neural Network-Based Rotor and Stator Resistance Estimation

Department of Electrical Machines, Drives and Measurements

Wroclaw University of Science and Technology

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This article presents an active current sensor (CS) fault-tolerant control (FTC) strategy for induction motor (IM) drive with adaptation of rotor and stator...

Active Current Sensor Fault-Tolerant Control of Induction Motor Drive with Online Neural Network-Based Rotor and Stator Resistance Estimation

Publié en ligne: 10 août 2023

Pages: 235 - 251

Reçu: 18 mai 2023

Accepté: 08 juil. 2023

DOI: https://doi.org/10.2478/pead-2023-0016

Mots clés
induction motor, fault-tolerant control, current sensor, resistances adaptation, neural network

© 2023 Michal Adamczyk et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Active Current Sensor Fault-Tolerant Control of Induction Motor Drive with Online Neural Network-Based Rotor and Stator Resistance Estimation

Publié en ligne: 10 août 2023

Pages: 235 - 251

Reçu: 18 mai 2023

Accepté: 08 juil. 2023

DOI: https://doi.org/10.2478/pead-2023-0016

Mots clésinduction motor, fault-tolerant control, current sensor, resistances adaptation, neural network

© 2023 Michal Adamczyk et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
induction motor, fault-tolerant control, current sensor, resistances adaptation, neural network