[
Akpolat, Z. H., Asher, G. M. and Arellano-Padilla, J. (2004). A Test Bed for the Experimental Validation of Position Control Algorithms. Control Engineering Practice, 12(8), 2004, pp. 933–943.
]Search in Google Scholar
[
Akpolat, Z. H., Asher, G. M. and Clare, J. C. (1999a). Dynamic Emulation of Mechanical Loads Using A Vector-Controlled Induction Motor-Generator Set. IEEE Transactions on Industrial Electronics, 46(2), pp. 370–379, doi: 10.1109/41.753776.
]Search in Google Scholar
[
Akpolat, Z. H., Asher, G. M. and Clare, J. C. (1999b). Experimental Dynamometer Emulation of Nonlinear Mechanical Loads. IEEE Transactions on Industry Applications, 35(6), pp. 1367–1373.
]Search in Google Scholar
[
Arellano-Padilla, J., Asher, G. M. and Sumner, M. (2006). Control of an AC Dynamometer for Dynamic Emulation of Mechanical Loads with Stiff and Flexible Shafts. IEEE Transactions on Industrial Electronics, 53(4), pp. 1250–1260.
]Search in Google Scholar
[
Bergmann, A. (2014). Benefits and Drawbacks of Model-Based Design. KMUTNB: IJAST, 7(3), pp. 15–19.
]Search in Google Scholar
[
Bouscayrol, A. (2008). Different types of hardware-inthe-loop simulation for electric drives. In: 2008 IEEE International Symposium on Industrial Electronics, Cambridge, 2008, pp. 2146–2151, doi: 10.1109/ISIE.2008.4677304.
]Search in Google Scholar
[
Collins, E. R. and Huang, Y. (1994). A Programable Dynamometer for Testing Rotating Machinery Using A Three-Phase Induction Machine. IEEE Transactions on Energy Conversion, 9, pp. 521–527.
]Search in Google Scholar
[
Damian, I. E., Iacchetti, M. and Apsley, J. (2019). Emulation of prime movers in wind turbine and diesel generator systems for laboratory use. In: 21st European Conference on Power Electronics and Applications, EPE 2019 ECCE Europe, pp. P.1–P.10, 2019. Available at: https://ieeexplore.ieee.org/abstract/document/8914799.
]Search in Google Scholar
[
de Oliveira, C. M. R., de Aguiar, M. L., de Castro, A. G., Guazzelli, P. R. U., de Andrade Pereira, W. C. and de Almeida Monteiro, J. R. B. (2020). High-Accuracy Dynamic Load Emulation Method for Electrical Drives. IEEE Transactions on Industrial Electronics, 67(9), pp. 7239–7249, doi: 10.1109/TIE.2019.2942566.
]Search in Google Scholar
[
dSPACE is registered trademark of dSPACE GmbH, Rathenaustrasse 26, 33102 Paderborn, Germany.
]Search in Google Scholar
[
Fetyko, J., Ďurovský, F., Reiner, J. and Fedák, V. (2007). Load share control of roughing mill vertical rolls at hot strip rolling mill. In: Proceedings of 16th Conference on Electrical Drives and Power Electronics, EDPE 2007. pp. 1–7. ISBN 978 8080 738686.
]Search in Google Scholar
[
Gan, C., Todd, R. M. and Apsley, J. (2015). Drive System Dynamics Compensator for a Mechanical System Emulator. IEEE Transactions on Industrial Electronics, 62(1), pp. 70–78, doi: 10.1109/TIE.2014.2327581.
]Search in Google Scholar
[
Kyslan, K., Kušnír, E., Fedák, V., Lacko, M. and Ďurovský, F. (2014). Dynamic emulation of mechanical loads with backlash based on rapid control prototyping. In: 16th International Power Electronics and Motion Control Conference and Exposition, 2014, pp. 1209–1215, doi: 10.1109/EPEPEMC.2014.6980676.
]Search in Google Scholar
[
MATLAB and Simulink are registered trademarks of The MathWorks, Inc., 1 Apple Hill Drive Natick, MA 01760-2098.
]Search in Google Scholar
[
Newton, R. W., Betz, R. E. and Penfold, H. B. (1995). Emulating dynamic load characteristics using a dynamic dynamometer. In: Proceedings of International Conference on Power Electronics and Drive Systems, PEDS1995, Vol. 1, Singapore, 21–24 February 1995, pp. 465–470.
]Search in Google Scholar
[
RT-LAB is product of OPAL-RT Technologies, 1751, rue Richardson Bureau #1060 Montréal, Québec H3K 1G6, Canada.
]Search in Google Scholar
[
Rodič, M., Jezernik, K. and Trlep, M. (2004a). A feedforward approach to the dynamic emulation of mechanical loads. In: Proceedings of the 35th Annual IEEE Power Electronics Specialists Conference (PESC’04), Aachen, Germany, 20–25 June 2004, pp. 4595–4601.
]Search in Google Scholar
[
Rodič, M., Jezernik, K. and Trlep, M. (2004b). Use of dynamic emulation of mechanical loads in the design of adjustable speed applications. In: The 8th IEEE International Workshop on Advanced Motion Control, 2004. AMC ‘04, Kawasaki, Japan, 28–28 March 2004, pp. 677–682.
]Search in Google Scholar
[
Rodič, M., Jezernik, K. and Trlep, M. (2005a). Control design in mechatronic systems using dynamic emulation of mechanical loads. In: Proceedings of the IEEE International Symposium on Industrial Electronics, 2005. ISIE 2005. 4, Dubrovnik, Croatia, 20–23 June 2005, pp. 1635–1640.
]Search in Google Scholar
[
Rodič, M., Jezernik, K. and Trlep, M. (2005b). Dynamic emulation of mechanical loads – approach based on nonlinear control. In: 2005 European Conference on Power Electronics and Applications (2005), Dresden, Germany, 11–14 September 2005, p. 10.
]Search in Google Scholar
[
Rodič, M., Jezernik, K. and Trlep, M. (2007). Use of dynamic emulation of mechanical loads in the testing of electrical vehicle driveline control algorithms. In: 2007 European Conference on Power Electronics and Applications, 2007, Aalborg, Denmark, 2–5 September 2007, pp. 1–10, doi: 10.1109/EPE.2007.4417707.
]Search in Google Scholar
[
Rodič, M., Jezernik, K. and Trlep, M. (2010). Dynamic emulation of mechanical loads — position control approach. In: Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010, Ohrid, Macedonia, 6–8 September 2010, pp. S10-23–S10-30, doi: 10.1109/EPEPEMC.2010.5606527.
]Search in Google Scholar
[
Rojas, J. J. G., Prada, D. A. Z. and Lopez-Santos, W. A. L. M. O. (2019). Real-time small-scale wind turbine emulator for a hybrid microgrid laboratory testbed. In: 2019 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2019 – Proceedings, 2019, Manizales, Colombia, 30–31 May 2019. Available: https://ieeexplore.ieee.org/document/8851573.
]Search in Google Scholar
[
Sandholdt, P., Ritchie, E., Pedersen, J. K. and Betz, R. E. (1996). A dynamometer performing dynamical emulation of loads with non-linear friction. In: Proceedings of the IEEE International Symposium on Industrial Electronics (lSIE’96), Warsaw, Poland, 17 June 1996, Part 2, pp. 873–878.
]Search in Google Scholar
[
SIMOTION, SINAMICS and Drive Control Chart are trademark of Siemens AG Industry Sector, Drive Technologies, Motion Control Systems, Postfach 3180, 91050 Erlangen, Germany.
]Search in Google Scholar
[
Šlapák, V., Ivan, J., Kyslan, K., Bil›anský, J., Hric, M. and Ďurovský, F. (2021). Load emulation for testing of electrical actuators in industrial applications. In: 2021 IEEE International Workshop of Electronics, Control, Measurement, Signals and their Application to Mechatronics (ECMSM), Liberec, Czech Republic, 21–22 June 2021, pp. 1–5, doi: 10.1109/ECMSM51310.2021.9468865.
]Search in Google Scholar
[
Suchý, Ľ., Kyslan, K., Ferková, Ž. and Ďurovský F. (2016). Dynamic emulation of mechanical loads — Analysis and implementation into industrial drive. In: 2016 ELEKTRO, Štrbské Pleso, Slovakia, 16–18 May 2016, pp. 238–242, doi: 10.1109/ELEKTRO.2016.7512072.
]Search in Google Scholar
[
Wasko, C. R. (1987). A Universal AC Dynamometer for Testing Motor Drive Systems. Conference Record of the 1987 IEEE Industry Applications Society Annual Meeting, Atlanta, GA, 18 – 23 October 1987, pp. 409–412.
]Search in Google Scholar
[
Wiliamson, A. C. (1989). An improved engine-testing dynamometer. In: Fourth International Conference on Electrical Machines and Drives, IEE Conference Publication 310, London, UK, 13–15 September 1989, pp. 374–378.
]Search in Google Scholar
[
Zhang, Z., Wang, L., Zhang, J. and Ma, R. (2017). Study on requirements for load emulation of the vehicle with an electric braking system. IEEE Transactions on Vehicular Technology, 66(11), pp. 9638–9653. Available at: https://ieeexplore.ieee.org/document/8010354.
]Search in Google Scholar
, 