<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper presents the concept and implementation of an electronic system for a switched-capacitor DC-DC converter with high voltage gain. The converter consists of seven switches, five of which being controlled like high-side type. This paper presents a non-typical bootstrap-based gate-driver system so that the converter can run using a single voltage source. The converter requires a special switching pattern to drive seven switches in a steady state and also during the start-up of the converter and the regulation of the output voltage. Therefore, an FPGA-based digital control system is used with various switching algorithms and protection functions implemented. The presented converter is an autonomic device that taps the energy from the main input. Therefore, the electronic system of the converter is equipped with a self-supply system with a wide range of the input voltage. The parameters of the converter such as voltage gain, voltages and power ranges can be scalable for prospective applications with the proposed control system.</p>
</abstract>

This paper presents the concept and implementation of an electronic system for a switched-capacitor DC-DC converter with high voltage gain. The converter consists of seven switches, five of which being controlled like high-side type. This paper presents a non-typical bootstrap-based gate-driver system so that the converter can run using a single voltage source. The converter requires a special switching pattern to drive seven switches in a steady state and also during the start-up of the converter and the regulation of the output voltage. Therefore, an FPGA-based digital control system is used with various switching algorithms and protection functions implemented. The presented converter is an autonomic device that taps the energy from the main input. Therefore, the electronic system of the converter is equipped with a self-supply system with a wide range of the input voltage. The parameters of the converter such as voltage gain, voltages and power ranges can be scalable for prospective applications with the proposed control system.

All-Bootstrap Gate-Driver Supply System for a High-Voltage-Gain Resonant DC-DC Converter with Seven Switches

Power Electronics and Drives

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper presents the concept and implementation of an electronic system for a switched-capacitor DC-DC converter with high voltage gain. The converter...

All-Bootstrap Gate-Driver Supply System for a High-Voltage-Gain Resonant DC-DC Converter with Seven Switches

Publié en ligne: 06 nov. 2020

Pages: 135 - 142

Reçu: 16 sept. 2020

Accepté: 12 oct. 2020

DOI: https://doi.org/10.2478/pead-2020-0011

Mots clés
FPGA, DC-DC converter, digital control, gate-driver circuit

© 2020 Robert Stala et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

All-Bootstrap Gate-Driver Supply System for a High-Voltage-Gain Resonant DC-DC Converter with Seven Switches

Publié en ligne: 06 nov. 2020

Pages: 135 - 142

Reçu: 16 sept. 2020

Accepté: 12 oct. 2020

DOI: https://doi.org/10.2478/pead-2020-0011

Mots clésFPGA, DC-DC converter, digital control, gate-driver circuit

© 2020 Robert Stala et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
FPGA, DC-DC converter, digital control, gate-driver circuit