[
1. Barton N, Lien R & Lunde J: “Engineering classification of rock masses for the design of tunnel support”. Rock Mechanics (6), 1974, pp. 189-236, ttps://doi.org/10.1007/BF0123949610.1007/BF01239496
]Search in Google Scholar
[
2. Bieniwanski Z T: “Engineering classification of jointed rock masses”. Civil Engineer in South Africa, 15 (12), 1973.
]Search in Google Scholar
[
3. Ansell A: “Investigation of shrinkage cracking in shotcrete on tunnel drains”. Tunnelling and Underground Space Technology, 25 (5), 2010, pp. 607-613, https://doi.org/10.1016/j.tust.2010.04.00610.1016/j.tust.2010.04.006
]Search in Google Scholar
[
4. Malmgren L, Nordlund E & Rolund S: “Adhesion strength and shrinkage of shotcrete”. Tunnelling and Underground Space Technology, 20 (1), 2005, pp. 33-48, https://doi.org/10.1016/j.tust.2004.05.00210.1016/j.tust.2004.05.002
]Search in Google Scholar
[
5. Sjölander A: “Analyses of shotcrete stress states due to varying lining thickness and irregular rock surfaces, Licentiate Thesis, KTH Royal Institute of Technology, Dept. of Civil & Architectural Engineering, Stockholm, Sweden, 2017.
]Search in Google Scholar
[
6. Sjölander A: “Structural behaviour of shotcrete in hard rock tunnelling, Doctoral Thesis, KTH Royal Institute of Technology, Dept. of Civil & Architectural Engineering, Stockholm, Sweden, 2020.
]Search in Google Scholar
[
7. Bjureland W, Johansson F, Sjölander A, Spross J & Larsson S: “Probability distributions of shotcrete parameters for reliability-based analyses of tunnel support”. Tunneling and Underground Space Technology, vol 87, 2019, pp. 15-26, https://doi.org/10.1016/j.tust.2019.02.00210.1016/j.tust.2019.02.002
]Search in Google Scholar
[
8. CEN. “EN 14488-3 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens”. Technical standard, Brussels, Belgium, 2006.
]Search in Google Scholar
[
9. CEN. “EN 14488-6 Testing sprayed concrete - Part 6: Thickness of concrete on a substrate”. Technical standard, Brussels, Belgium, 2006.
]Search in Google Scholar
[
10. Fernandez-Delgado G, Mahar J & Cording E: “Shotcrete: Structural testing of thin liners”. Technical report, University of Illinois, Illinois, USA, 1975.
]Search in Google Scholar
[
11. Holmgren J: “Punch-loaded shotcrete linings on hard rock”. Swedish Rock Mechanics Research Foundation BeFo, Stockholm, Sweden, 1979.
]Search in Google Scholar
[
12. Barrett S V L& McCreath D R: “Shotcrete support design in blocky ground: Towards a deterministic approach”. Tunnelling and Underground Space Technology, 10 (1), 1995, pp. 79-89, https://doi.org/10.1016/0886-7798(94)00067-U10.1016/0886-7798(94)00067-U
]Search in Google Scholar
[
13. Sjölander A, Hellgren R & Ansell A: “Modelling aspects to predict failure of a bolt-anchored and fibre reinforced shotcrete lining”. Proceedings, 8th International Symposium on Sprayed Concrete, Trondheim, Norway, 2018, pp. 278-292.
]Search in Google Scholar
[
14. Sjölander, A., Hellgren, R., Malm, R., Ansell, A.: “Verification of design philosophy and failure mechanism for a bolt-anchored and fibre reinforced shotcrete lining, Engineering Failure Analysis, 116, 2020, https://doi.org/10.1016/j.engfailanal.2020.10474110.1016/j.engfailanal.2020.104741
]Search in Google Scholar
[
15. Olesen J F: “Fictitious crack propagation in fibre reinforced concrete beams”. Journal of Engineering Mechanics, 127 (3), 2001, pp. 272-280, https://doi.org/10.1061/(ASCE)0733-9399(2001)127:3(272)10.1061/(ASCE)0733-9399(2001)127:3(272)
]Search in Google Scholar
[
16. Soetens T & Matthys, S: “Different methods to model the post-cracking behaviour of hooked-end steel fibre reinforced concrete”. Construction and Building Materials, 73, 2014, pp. 458-471, https://doi.org/10.1016/j.conbuildmat.2014.09.09310.1016/j.conbuildmat.2014.09.093
]Search in Google Scholar
[
17. Camanho P & Davila C G: “Mixed-mode decohesion finite elements for the simulation of delamination in composite materials”. Technical memorandum TM-2002-211737, NASA, USA, 2002.
]Search in Google Scholar
[
18. Dong W, Yang D, Zhou X, Kastiukas & G Zhang B: “ Experimental and numerical investigations on fracture process zone of rock–concrete interface”. Fatigue and Fracture of Engineering Materials & Structures, 40 (5), 2016, pp. 820-835.10.1111/ffe.12558
]Search in Google Scholar
[
19. Trafikverket (Swedish Transport Administration): “Handbook for planning of tunnels (in Swedish)”. Trafikverket, Borlänge, Sweden, 2016.
]Search in Google Scholar
[
20. Stille H, Johansson R & Nord, G: “Rock support and excavations under various conditions”. In Proceedings of International Symposium on Tunnelling for Water Resources and Power Projects, New Delhi, India, 1988.
]Search in Google Scholar
[
21. Sjölander A, Ansell A & Malm, R: “Variations in rock support capacity due to local variations in bond strength and shotcrete thickness, Engineering Failure Analysis, 128, 2021, https://doi.org/10.1016/j.engfailanal.2021.10561210.1016/j.engfailanal.2021.105612
]Search in Google Scholar
[
22. Sjödin B: “How to generate random surfaces in COMSOL Multiphysics”. 2017. https://www.comsol.com/blogs/how-to-generate-random-surfaces-in-comsol-multiphysics/ (accessed September 6, 2022)
]Search in Google Scholar
[
23. Wilde B & Johansson F: “System Reliability of Concrete Dams with Respect to Foundation Stability: Application to a Spillway”. Journal of Geotechnical and Geoenvironmental Engineering, 139 (2), 2013, pp. 308-319, https://doi.org/10.1061/(ASCE)GT.1943-5606.000076110.1061/(ASCE)GT.1943-5606.0000761
]Search in Google Scholar
