[
1. Ferraris C F, Obla K H & Hill R: “The Influence of Mineral Admixtures on the Rheology of Cement Paste and Concrete”. Cement and Concrete Research, Vol. 31, No. 2, 2001, pp. 245-255.10.1016/S0008-8846(00)00454-3
]Search in Google Scholar
[
2. Krieger I M & Dougherty T J: “A Mechanism for Non-Newtonian Flow in Suspensions of Rigid Spheres”. Transactions of the society of rheology III, 1959, pp. 137-152.10.1122/1.548848
]Search in Google Scholar
[
3. Chong J S, Christiansen E B & Baer A D: “Rheology of Concentrated Suspensions”. Journal of applied polymer science, Vol. 15, 1971, pp. 2007-2021.10.1002/app.1971.070150818
]Search in Google Scholar
[
4. Mooney M: “The Viscosity of a Concentrated Suspension of Spherical Particles”. Journal of Colloid Interface Science, Vol. 6, No. 2, 1951, pp. 162-170.10.1016/0095-8522(51)90036-0
]Search in Google Scholar
[
5. Eilers H: “Die Viskosität von Emulsionen hochviskoser Stoffe als Funktion der Konzentration”. (“The Viscosity of Emulsions of Highly Viscous Materials as a Function of Concentration”). Kolloid Zeitschrift, Vol. 97, No. 3, 1941, pp. 313-321 (in German).10.1007/BF01503023
]Search in Google Scholar
[
6. Quemada D: “Rheology of Concentrated Disperse Systems and Minimum Energy Dissipation Principle”. Rheologica Acta, Vol. 16, 1977, pp. 82-94.10.1007/BF01516932
]Search in Google Scholar
[
7. Robinson J V: “The Viscosity of Suspensions of Spheres”. Journal of Physical Chemistry, Vol. 53, No. 7, 1949, pp. 1042-1056.10.1021/j150472a007
]Search in Google Scholar
[
8. Spangenberg J, Scherer G W, Hopkins A B & Torquato S: “Viscosity of Bimodal Suspensions with Hard Spherical Particles”. Journal of Applied Physics, Vol. 116, No. 18, 2014.10.1063/1.4901463
]Search in Google Scholar
[
9. Damineli B L, John V N, Lagerblad B & Pileggi R G: “Viscosity Prediction of Cement-Filler Suspensions using Interference Model: A Route for Binder Efficiency Enhancement”, Cement and Concrete Research, Vol. 84, 2016, pp. 8-19.10.1016/j.cemconres.2016.02.012
]Search in Google Scholar
[
10. Buscall R, McGowan I J, Mills P D A, Stewart R F, Sutton D, White L R & Yates G E: “The Rheology of Strongly-Flocculated Suspensions”. Journal of Non-Newtonian Fluid Mechanics, Vol. 24, 1987, pp. 183-202.10.1016/0377-0257(87)85009-7
]Search in Google Scholar
[
11. Kapur P C, Scales P J, Boger D V & Healy T W: “Yield Stress of Suspensions Loaded with Size Distributed Particles”. AICHE Journal, Vol. 43, 1997, pp. 1171-1179.10.1002/aic.690430506
]Search in Google Scholar
[
12. Scales P J, Johnson S B, Healy T W & Kapur P C: “Shear Yield Stress of Partially Flocculated Colloidal Suspensions”. AICHE Journal, Vol. 44, 1998, pp. 538–544.10.1002/aic.690440305
]Search in Google Scholar
[
13. Zhou Z, Solomon M J, Scales P J & Boger D V: “The Yield Stress of Concentrated Flocculated Suspensions of Size Distributed Particles”. Journal of Rheology, Vol. 43, 1999, pp. 651-671.10.1122/1.551029
]Search in Google Scholar
[
14. Flatt R J & Bowen P: “Yodel: A Yield Stress Model for Suspensions”. Journal of the American Ceramic Society, Vol. 89, No. 4, 2006, pp.1244-1256.10.1111/j.1551-2916.2005.00888.x
]Search in Google Scholar
[
15. Powers T C: “The Properties of Fresh Concrete”. Wiley & Sons, New York, USA, 1968, 664 pp.
]Search in Google Scholar
[
16. Cepuritis R, Jacobsen S, Smeplass S, Mørtsell E, Wigum B J & Ng S: “Influence of Crushed Aggregate Fines with Micro-Proportioned Particle Size Distributions on Rheology of Cement Paste”. Cement and Concrete Composites, Vol. 80, 2017, pp. 64-79.10.1016/j.cemconcomp.2017.02.012
]Search in Google Scholar
[
17. Skare E L, Cepuritis R, Spangenberg J, Ramenskiy E, Mørtsell E, Smeplass S, Jacobsen S: “Microproportioning Paste with Crushed Aggregate Filler by Use of Specific Surface Area”, Proceedings, The 15th International Congress on the Chemistry of Cement, Prague, Czech Republic, 2019. Ed. Gemrich J. ISSN 2523-935X, 10 pp.
]Search in Google Scholar
[
18. Mørtsell E: “Modellering av Delmaterialenes Betydning for Betongens Konsistens”. (“Modelling the Effect of Concrete Part Materials on Concrete Consistency“). (PhD Thesis). Norwegian University of Science and Technology, Department of Structural Engineering, Trondheim, Norway, 1996, 301 pp. (In Norwegian).
]Search in Google Scholar
[
19. Cepuritis R: “Development of Crushed Sand for Concrete Production with Micro-proportioning”. (PhD Thesis). Norwegian University of Science and Technology, Department of Structural Engineering, Trondheim, Norway, 2016, 386 pp.
]Search in Google Scholar
[
20. Bengtsson M & Evertsson CM: “Measuring characteristics of aggregate material from vertical shaft impact crushers”. Minerals Engineering, Vol. 19 (15), 2006, pp. 1479-1486.10.1016/j.mineng.2006.08.003
]Search in Google Scholar
[
21. Wallevik O.H: “Den ferske betongens reologi og anvendelse på betong med og uten tilsetning av silikastøv». (Rheology of Fresh Concrete and Application to Concrete With and Without Addition of Silica Fume”). (PhD Thesis) Norges tekniske høgskole, Trondheim, Norway, 1990, 185 pp.
]Search in Google Scholar
[
22. Sheiat S, Ranjbar N, Frellsen J, Skare E L, Cepuritis R, Jacobsen S & Spangenberg J: “Neural Network Predictions of the Simulated Rheological Response of Cement Paste in the FlowCyl”. Neural Compututing & Applications, Vol. 33, 2021, pp. 13027–13037.10.1007/s00521-021-05999-4
]Search in Google Scholar
[
23. Great Wall Mineral, From the GWM Selection [Internet], <http://greatwallmineral.com/index.asp?Id=3> [Read 05.04.19]
]Search in Google Scholar
[
24. Jacobsen S, Maage M, Smeplass S, Kjellsen K O, Sellevold E J, Lindgård J, Cepuritis R, Myrdal R, Bjøntegaard Ø, Geiker M et al.: “TKT 4215 Concrete Technology 1”, Compendium, Norwegian University of Science and Technology, Department of Structural Engineering, Trondheim, Norway, 2016.
]Search in Google Scholar
[
25. Ng S, Mujica H & Smeplass S: “Design of a Simple and Cost-Efficient Mixer for Matrix Rheology Testing”, Nordic Concrete Research, Vol. 51, No. 3, 2014, pp. 15-28.
]Search in Google Scholar
[
26. Spangenberg J, da Silva W R L, Comminal R, Mollah M T, Andersen T J & Stang H: “Numerical simulation of multi-layer 3D concrete printing”, RILEM Technical Letters 6, 2021, pp. 119-123.10.21809/rilemtechlett.2021.142
]Search in Google Scholar
[
27. Comminal R, da Silva W R L, Andersen T J, Stang H & Spangenberg J: “Modelling of 3D concrete printing based on computational fluid dynamics”, Cement and Concrete Research, Vol. 138, 106256, 2020, 12 pages.10.1016/j.cemconres.2020.106256
]Search in Google Scholar
[
28. Comminal R, da Silva W R L, Andersen T J, Stang H & Spangenberg J: “Influence of processing parameters on the layer geometry in 3D concrete printing: experiments and modelling”, RILEM international Conference on Concrete and Digital Fabrication, 2020, pp.852-862.10.1007/978-3-030-49916-7_83
]Search in Google Scholar
[
29. Rosquoëta F, Alexis A, Khelidj A & Phelipot A: “Experimental Study of Cement Grout: Rheological Behavior and Sedimentation”. Cement and Concrete Research, Vol. 33, 2003, pp. 713-722.10.1016/S0008-8846(02)01036-0
]Search in Google Scholar
[
30. Cepuritis R, Skare E L, Ramenskiy E, Mørtsell E, Smeplass S, Li S, Jacobsen S & Spangenberg J: “Analysing Limitations of the FlowCyl as a One-Point Viscometer Test for Cement Paste”. Construction and Building Materials, Vol. 218, 2019, pp. 333-340.10.1016/j.conbuildmat.2019.05.127
]Search in Google Scholar
[
31. Skare E L, Jacobsen S, Cepuritis R, Smeplass S & Spangenberg J: “Decreasing the Magnitude of Shear Rates in the FlowCyl”. Proceedings, 5th fib Congress, Melbourne, Australia, 2018.
]Search in Google Scholar
