[1. Edwards Y: “Hållbara brobaneplattor-tätskikt: state of the art.” Report, Swedish Cement & Concrete Research Institute, Stockholm, Sweden, 2011, pp. 32-72. (In Swedish.)]Search in Google Scholar
[2. Yusuf Hassan A: “Slitbanebetong för broar: Inventering och inverkan av krympning.” Master thesis, Luleå University of Technology, Dept. of Civil, Environmental and Natural Resources Engineering, Luleå, Sweden, 2012, pp. 13-15. (In Swedish.)]Search in Google Scholar
[3. Sayahi F: “Plastic Shrinkage Cracking in Concrete: Mitigation and Modelling.” Doctoral thesis, Luleå University of Technology, Dept. of Civil, Environmental and Natural Resources Engineering, Luleå, Sweden, 2019.]Search in Google Scholar
[4. Carlswärd J & Emborg M: “Shrinkage cracking of thin concrete overlays.” Nordic Concrete Research, Vol. 50, 2014, pp. 355-359.]Search in Google Scholar
[5. Jonasson J-E: “Datorprogram för icke-linjära beräkningar i betong med hänsyn till svinn, krypning och temperatur.” Report, Swedish Cement & Concrete Research Institute, Stockholm, Sweden, 1977, pp. 105-108.]Search in Google Scholar
[6. Birkeland HW. “Differential shrinkage in composite beams.” ACI Journal Proceedings, Vol. 56, No. 5, 1960, pp. 1123-1136.10.14359/8133]Search in Google Scholar
[7. Silfwerbrand J: “Improving Concrete Bond in Repaired Bridge Decks.” Concrete International, Vol. 12, No 9, 1990, pp. 61-66.]Search in Google Scholar
[8. Silfwerbrand J: “Bonded concrete overlays – Research needs.” Proceedings, 2nd International RILEM Symposium on Advances in Concrete through Science and Engineering, Sept. 11-16, Quebec City, Canada, pp. 193-206.]Search in Google Scholar
[9. Silfwerbrand J: “Stresses and strains in composite concrete beams subjected to differential shrinkage.” Structural Journal 94, 1997, pp. 347-353.10.14359/485]Search in Google Scholar
[10. Courard L, Piotrowski T & Garbacz A: “Near-to-surface properties affecting bond strength in concrete repair.” Cement and Concrete Composites, Vol. 46, 2014, pp. 73-80.10.1016/j.cemconcomp.2013.11.005]Search in Google Scholar
[11. Bissonnette B, Courard L, Fowler D W & Granju J: “Bonded Cement-based Material Overlays for the Repair, the Lining or the Strengthening of Slabs or Pavements: State-of-the-art.” Report of the RILEM Technical Committee 193-RLS, Springer Science & Business Media, 2011, pp. 51-76.10.1007/978-94-007-1239-3]Search in Google Scholar
[12. Sadowski Ł, Żak A & Hoła J: “Multi-sensor evaluation of the concrete within the interlayer bond with regard to pull-off adhesion.” Archives of Civil and Mechanical Engineering, Vol. 18, 2018, pp. 573-582.10.1016/j.acme.2017.09.008]Search in Google Scholar
[13. Beushausen H, Höhlig B & Talotti M: “The influence of substrate moisture preparation on bond strength of concrete overlays and the microstructure of the OTZ.” Cement and Concrete Research, Vol. 92, 2017, pp. 84-91.10.1016/j.cemconres.2016.11.017]Open DOISearch in Google Scholar
[14. Morgan D R: “Compatibility of concrete repair materials and systems.” Construction and Building Materials, Vol. 10, 1996, pp. 57-67.10.1016/0950-0618(95)00060-7]Search in Google Scholar
[15. Carlswärd J: “Shrinkage Cracking of Steel Fibre Reinforced Self Compacting Concrete Overlays: Test Methods and Theoretical Modelling: Test Methods and Theoretical Modelling.” Doctoral thesis, Luleå University of Technology, Dept. of Civil, Environmental and Natural Resources Engineering, Luleå, Sweden, 2006, pp. 93-95.]Search in Google Scholar
[16. Bažant Z P & Baweja. S: “Creep and shrinkage prediction model for analysis and design of concrete structures: Model B3.” ACI Special Publications, Vol. 194, 2000, pp. 1-84.]Search in Google Scholar
[17. Taylor H F: “Cement chemistry”, Thomas Telford, 1990, pp. 335-337.]Search in Google Scholar
[18. Tazawa E, Miyazawa S & Kasai. T: “Chemical shrinkage and autogenous shrinkage of hydrating cement paste.” Cement and Concrete Research, Vol. 25, 1995, pp. 288-292,10.1016/0008-8846(95)00011-9]Open DOISearch in Google Scholar
[19. Nilsson L & Johansson B: Crack-Free-Con. “Data från krympexperiment”, Report TVBM 3171, Lund University, Div. of Building Materials, Lund, Sweden, 2013. (In Swedish.)]Search in Google Scholar
[20. Jensen O M & Hansen P F: “A dilatometer for measuring autogenous deformation in hardening Portland cement paste.” Materials and Structures, Vol. 28, 1995, pp. 406-409.10.1007/BF02473076]Search in Google Scholar
[21. Ye H & Radlińska A: “A review and comparative study of existing shrinkage prediction models for Portland and non-Portland cementitious materials.” Advances in Materials Science and Engineering, Vol. 122, 2016, pp. 594-606.10.1155/2016/2418219]Search in Google Scholar
[22. Lura P, Jensen O M & van Breugel K.: “Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms.” Cement and Concrete Research, Vol. 33, 2003, pp. 223-232.10.1016/S0008-8846(02)00890-6]Search in Google Scholar
[23. Aili A, Vandamme M, Torrenti J & Masson B: “Is long-term autogenous shrinkage a creep phenomenon induced by capillary effects due to self-desiccation?” Cement and Concrete Research, Vol. 108, 2018, pp. 186-200.10.1016/j.cemconres.2018.02.023]Search in Google Scholar
[24. Mjörnell K N: “Moisture Conditions in High Performance Concrete.” Doctoral thesis, Chalmers University of Technology, Dept. of Building Materials, Göteborg, Sweden, 1997, pp. 34-40.]Search in Google Scholar
[25. Physics of Creep, Shrinkage, and Durability of Concrete: A Tribute to Wendner R, Hubler M H & Bažant Z P: “The B4 model for multi-decade creep and shrinkage prediction.” Proceedings, 9th international conference on creep, shrinkage and durability mechanics, “Mechanics and Zdeněk P. Bažant”. Cambridge, MA, USA, Sept. 2013.]Search in Google Scholar
[26. Abuhaikal M, Ioannidou K, Petersen T, Pellenq R J & Ulm F: “Le Châtelier’s conjecture: Measurement of colloidal eigenstresses in chemically reactive materials.” Journal of the Mechanics and Physics of Solids, Vol. 112, 2018, pp. 334-344.10.1016/j.jmps.2017.12.012]Search in Google Scholar
[27. Hansen W: “Drying shrinkage mechanisms in Portland cement paste.” Journal of the American Ceramic Society, Vol.70, 1987, pp. 323-328.10.1111/j.1151-2916.1987.tb05002.x]Open DOISearch in Google Scholar
[28. Hua C, Acker P & Ehrlacher A: “Analyses and models of the autogenous shrinkage of hardening cement paste: I. Modelling at macroscopic scale.” Cement and Concrete Research, Vol. 25, 1995, pp. 1457-1468.10.1016/0008-8846(95)00140-8]Open DOISearch in Google Scholar
[29. Bangham D H, Fakhoury N & Mohamed A F: “The swelling of charcoal. Part II.—Some factors controlling the expansion caused by water, benzene and pyridine vapours.” Proceedings, The Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, Vol. 138, 1932, pp. 162-183.10.1098/rspa.1932.0178]Search in Google Scholar
[30. Odman S: “Effects of variations in volume, surface area exposed to drying, and composition of concrete on shrinkage.” Proceedings, Colloquium on the shrinkage of hydraulic concretes, Madrid Spain, 1968, pp. 20.]Search in Google Scholar
[31. Bažant Z P, Hauggaard A B, Baweja S & Ulm F: “Microprestress-solidification theory for concrete creep. I: Aging and drying effects.” Journal of Engineering Mechanics, Vol. 123, 1997, pp. 1188-1194.10.1061/(ASCE)0733-9399(1997)123:11(1188)]Search in Google Scholar
[32. Neville A M: “Właściwości Betonu”, 4th edition, Polski Cement, 2000. pp. 441-455. (In Polish.)]Search in Google Scholar
[33. Jonasson J E, Mjörnell K & Carlsson C A: “Modeling of Simultaneous Temperature and Moisture transportation in modern concrete.” Proceedings. International RILEM Symposium on Concrete Modelling ConMod. Delft, The Netherlands, Vol. 8, 2008, pp. 665-672.]Search in Google Scholar
[34. Ross A D: “Shape, size and shrinkage.” Concrete and Constructional Engineering, Vol. 39, 1944, pp. 193-199.]Search in Google Scholar
[35. Bažant Z P & Murphy W P: “Creep and shrinkage prediction model for analysis and design of concrete structures-model B3.” Matériaux et constructions, Vol. 28, 1995, pp. 357-365.10.1007/BF02473152]Search in Google Scholar
[36. ACI. “Prediction of creep, shrinkage, and temperature effects in concrete structures”. ACI 209r-92, American Concrete Institute, Farmington Hills, MI, USA, 1992.]Search in Google Scholar
[37. CEB-FIP, M.C. Design code. Comite Euro International du Beton, Lausanne, Switzerland, 1990, pp. 51-59.]Search in Google Scholar
[38. Almudaiheem J A & Hansen W: “Effect of specimen size and shape on drying shrinkage of concrete.” Materials Journal, Vol. 84, 1987, pp. 130-135.10.14359/1860]Search in Google Scholar
[39. Hobbs D W & Mears A R: “The influence of specimen geometry upon weight change and shrinkage of air-dried mortar specimens.” Magazine of Concrete Research, Vol. 23, 1971, pp. 89-98.10.1680/macr.1971.23.76.89]Open DOISearch in Google Scholar
[40. L’Hermite R G: “Nouveaux resultants de recherches sur la deformation et la rupture du beton.” Annales De 1’Institut Technique Du Batiment Et Des Travaux Publics, Vol. 18, 1965, pp. 325-359. (In French.)]Search in Google Scholar
[41. Hansen T C & Mattock A H: “Influence of Size and Shape of Member on the Shrinkage and Creep of Concrete.” Proceedings ACI, Vol. 63, No. 2, 1966, pp. 267–290.10.14359/7622]Search in Google Scholar
[42. Benboudjema F & Torrenti. J: “Modelling desiccation shrinkage of large structures.” InEPJ Web of Conferences, Vol. 56, 2013, pp. 02001.10.1051/epjconf/20135602001]Search in Google Scholar
[43. Torrenti J M & Benboudjema F: “Desiccation Shrinkage of Large Structures: Is there a Size Effect?” Proceedings, 9th international conference on creep, shrinkage and durability mechanics, “Mechanics and Zdeněk P. Bažant”. Cambridge, MA, USA, Sept. 2013., pp. 404-411.10.1061/9780784413111.048]Search in Google Scholar
[44. Havlásek P, Jirásek M: “Multiscale modeling of drying shrinkage and creep of concrete”, Cement and Concrete Research, Vol. 85, July 2016, pp. 55-74.10.1016/j.cemconres.2016.04.001]Search in Google Scholar
[45. Wu L,Farzadnia N, Shi C, Zhang Z & Wang H: “Autogenous shrinkage of high performance concrete: A review.”, Construction and Building Materials, Vol. 149, 2017, pp. 62-75.10.1016/j.conbuildmat.2017.05.064]Search in Google Scholar
[46. Hooton R D, Stanish K & Prusinski J: “The effect of ground granulated blast furnace slag (slag cement) on the drying shrinkage of concrete–a critical review of the literature.” Slag Cement Concrete, 2009, pp. 79-94.]Search in Google Scholar
[47. Tazawa E & Miyazawa S: “Influence of constituents and composition on autogenous shrinkage of cementitious materials.” Magazine of Concrete Research, Vol. 49, 1997, pp. 15-22.10.1680/macr.1997.49.178.15]Search in Google Scholar
[48. Khayat K H: “Silica Fume in Concrete-An Overview.” ACI Special Publication, Vol. 132, 1992, pp. 835-872.]Search in Google Scholar
[49. Bentz D P, Jensen O M, Hansen K K, Olesen J F, Stang H & Haecker C: “Influence of Cement Particle-Size Distribution on Early Age Autogenous Strains and Stresses in Cement-Based Materials.”, Journal of the American Ceramic Society, Vol. 84, 2001, pp. 129-135.10.1111/j.1151-2916.2001.tb00619.x]Search in Google Scholar
[50. Neville A M: “Role of cement in the creep of mortar.” ACI Journal Proceedings, Vol. 55, 1959, pp. 963-984.10.14359/11405]Search in Google Scholar
[51. Bennett E W & Loat D R: “Shrinkage and creep of concrete as affected by the fineness of Portland cement”, Magazine of Concrete Research, Vol. 22, 1970, pp. 69-78.10.1680/macr.1970.22.71.69]Open DOISearch in Google Scholar
[52. Bentz D P & Haecker C J: “An argument for using coarse cements in high-performance concretes.” Cement and Concrete Research, Vol. 29, 1999, pp. 615-618.10.1016/S0008-8846(98)00201-4]Open DOISearch in Google Scholar
[53. Ravikovitch P I & Neimark A V: “Experimental confirmation of different mechanisms of evaporation from ink-bottle type pores: equilibrium, pore blocking, and cavitation.” Langmuir, Vol. 18, 2002, pp. 9830-9837.10.1021/la026140z]Open DOISearch in Google Scholar
[54. Zeng Q, Li K, Fen-Chong T & Dangla P: “Pore structure characterization of cement pastes blended with high-volume fly-ash.” Cement and Concrete Research, Vol. 42, 2012, pp. 194-204.10.1016/j.cemconres.2011.09.012]Open DOISearch in Google Scholar
[55. Chen X, Wu S & Zhou J: “Experimental study and analytical model for pore structure of hydrated cement paste.” Applied Clay Science, Vol. 101, 2014, pp. 159-167.10.1016/j.clay.2014.07.031]Search in Google Scholar
[56. Yu Z, Ma J, Ye G, van Breugel K & Shen X: “Effect of fly ash on the pore structure of cement paste under a curing period of 3 years.” Construction and Building Materials, Vol. 144, 2017, pp. 493-501.10.1016/j.conbuildmat.2017.03.182]Search in Google Scholar
[57. Yu Z, Ni C, Tang M & Shen X: “Relationship between water permeability and pore structure of Portland cement paste blended with fly ash.” Construction and Building Materials, Vol. 175, 2018, pp. 458-466.10.1016/j.conbuildmat.2018.04.147]Search in Google Scholar
[58. Pickett G: “Effect of aggregate on shrinkage of concrete and a hypothesis concerning shrinkage.” ACI Journal Proceedings, Vol. 52, 1956, pp. 581-590.10.14359/11617]Search in Google Scholar
[59. Troxell G E, Davis H E & Kelly J W: “Composition and properties of concrete.” 2nd edition, McGraw-Hill Book Company, 1968.]Search in Google Scholar
[60. Hobbs D W: “Influence of aggregate restraint on the shrinkage of concrete.” ACI Journal Proceedings, Vol. 71, 1974, pp. 445-450.10.14359/7089]Search in Google Scholar
[61. Bisschop J & van Mier J G: “Effect of aggregates and microcracks on the drying rate of cementitious composites”. Cement and Concrete Research, Vol. 38, 2008, pp. 1190-1196.10.1016/j.cemconres.2008.03.015]Open DOISearch in Google Scholar
[62. Bisschop J & Van Mier J G: “Effect of aggregates on drying shrinkage microcracking in cement-based composites.” Materials and Structures, Vol. 35, 2002, pp. 453-461.10.1007/BF02483132]Search in Google Scholar
[63. EN 1992-1-1: “Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings.” European Committee for standardisation, 2005, pp. 26-29.]Search in Google Scholar
[64. Jonasson J: “Modelling of Temperature, Moisture and Stresses in Young Concrete.” Doctoral Thesis, Luleå University of Technology, Div. of Structural Engineering, Luleå, Sweden, 1994, pp. 47-56.]Search in Google Scholar
[65. Hedlund H: “Hardening Concrete: Measurements and Evaluation of Non-Elastic Deformation and Associated Restraint Stresses.” Doctoral Thesis, Luleå University of Technology, Div. of Structural Engineering, Luleå, Sweden, 2000, pp. 110-135.]Search in Google Scholar
[66. Bjøntegaard Ø & Sellevold E J: “Thermal Dilation – Autogenous Shrinkage: How to Separate.” Proceedings, International Workshop on Autogenous Shrinkage of Concrete, organized by JCI, Hiroshima, Japan, 1999, pp. 245-256.]Search in Google Scholar
[67. Beushausen H & Bester N: “The influence of curing on restrained shrinkage cracking of bonded concrete overlays.” Cement and Concrete Research, Vol. 87, 2016, pp. 87-96.10.1016/j.cemconres.2016.05.007]Search in Google Scholar
[68. Tamtsia B T & Beaudoin JJ: “Basic creep of hardened cement paste. A re-examination of the role of water.” Cement and Concrete Research, Vol. 30, 2000, pp. 1465-1475.10.1016/S0008-8846(00)00279-9]Open DOISearch in Google Scholar
[69. Powers T C: “A discussion of cement hydration in relation to the curing of concrete.” Highway Research Board Proceedings, vol. 27, 1948, pp. 178-188]Search in Google Scholar
[70. Feldman R F & Sereda, P J: “A model for hydrated Portland cement paste as deduced from sorption-length change and mechanical properties.” Matériaux Et Construction, Vol. 1, 1968, pp. 509-520.10.1007/BF02473639]Search in Google Scholar
[71. Acker P & Ulm F: “Creep and shrinkage of concrete: physical origins and practical measurements.” Nuclear Engineering and Design, Vol. 203, 2001, pp. 143-158.10.1016/S0029-5493(00)00304-6]Search in Google Scholar
[72. Theiner,Y, Drexel M, Neuner M, & Hofstetter G: “Comprehensive study of concrete creep, shrinkage, and water content evolution under sealed and drying conditions.” Strain, 2017, 53:e12223.10.1111/str.12223]Search in Google Scholar
[73. Wyrzykowski M & Lura P: “The effect of external load on internal relative humidity in concrete.” Cement and Concrete Research, Vol. 65, 2014, pp. 58-63.10.1016/j.cemconres.2014.07.011]Search in Google Scholar
[74. Young J F: “An Assessment of the Influence of Microstructure on Time-Dependent Deformations of Hardened Cement Paste.” Proceedings, First Australian Conference on Engineering Materials, Sidney 1974, pp. 3-28]Search in Google Scholar
[75. Vandamme M & Ulm F: “Nanoindentation investigation of creep properties of calcium silicate hydrates.” Cement and Concrete Research, Vol. 52, 2013, pp. 38-52.10.1016/j.cemconres.2013.05.006]Open DOISearch in Google Scholar
[76. Bažant Z P & Jirásek M: “Creep and hygrothermal effects in concrete structures.” Vol. 225, Springer, 201810.1007/978-94-024-1138-6]Search in Google Scholar
[77. Bažant Z P & Chern J: “Log double power law for concrete creep.” ACI Journal Proceedings, Vol. 82, 1985, pp. 665-675.10.14359/10377]Search in Google Scholar
[78. Larson M & Jonasson J-E: “Linear Logarithmic Model for Concrete Creep.” Journal of Advanced Concrete Technology, Vol. 1, 2003, pp. 172-187.10.3151/jact.1.172]Search in Google Scholar
[79. Hösthagen: A: “Evaluation of material Properties for Young Concrete”. Draft Report, Luleå Technical University, Div. of Building Materials and Structural Engineering, Luleå, Sweden, 2019. (To be published).]Search in Google Scholar
[80. Emborg M: “Thermal Stresses in Concrete Structures at Early Ages.” Doctoral Thesis, Luleå University of Technology, Div. of Structural Engineering, Luleå, Sweden, 1989, pp. 99-100.]Search in Google Scholar
[81. Østergaard L, Lange D A, Altoubat S A & Stang H: “Tensile basic creep of early-age concrete under constant load.” Cement and Concrete Research, Vol. 31, 2001, pp. 1895-1899.10.1016/S0008-8846(01)00691-3]Open DOISearch in Google Scholar
[82. Bažant Z P & Yunping X I: “Drying creep of concrete: constitutive model and new experiments separating its mechanisms.” Materials and Structures, Vol. 27, 1994, pp. 3-14.10.1007/BF02472815]Search in Google Scholar
[83. Bažant Z P & Raftshol W J: “Effect of cracking in drying and shrinkage specimens”, Cement and Concrete Research, Vol. 12, 1982, pp. 209-226.10.1016/0008-8846(82)90008-4]Open DOISearch in Google Scholar
[84. Bissonnette B & Pigeon M: “Tensile creep at early ages of ordinary, silica fume and fiber reinforced concretes.” Cement and Concrete Research, Vol. 25, 1995, pp. 1075-1085.10.1016/0008-8846(95)00102-I]Open DOISearch in Google Scholar
[85. Klausen A E, Kanstad T, Bjøntegaard Ø & Sellevold E J: “Comparison of tensile and compressive creep of fly ash concretes in the hardening phase.” Cement and Concrete Research, Vol. 95, 2017, pp. 188-194.10.1016/j.cemconres.2017.02.018]Search in Google Scholar
[86. Westman G: “Concrete Creep and Thermal Stresses: New Creep Models and their Effects on Stress Development.” Licentiate Thesis, Luleå University of Technology, Dept. of Civil, Environmental and Natural Resources Engineering, Luleå, Sweden, 1995, pp. 37-57.]Search in Google Scholar
[87. Grzybowski M & Shah S P: “Model to predict cracking in fibre reinforced concrete due to restrained shrinkage.” Magazine of Concrete Research, Vol. 41, 1989, pp. 125-135.10.1680/macr.1989.41.148.125]Search in Google Scholar
[88. Ji,G M, Kanstad, T, Bjøntegaard Ø & Sellevold E J: “Tensile and compressive creep deformations of hardening concrete containing mineral additives.” Materials and Structures, Vol. 46, 2013, pp.1167-1182.10.1617/s11527-012-9962-7]Search in Google Scholar
[89. Bissonnette B & Pigeon M: “Tensile creep at early ages of ordinary, silica fume and fiber reinforced concretes.” Cement and Concrete Research, Vol. 25, 1995, pp.1075-1085.10.1016/0008-8846(95)00102-I]Open DOISearch in Google Scholar
[90. Bissonnette B, Pigeon M & Vaysburd A M:”Tensile creep of concrete: study of its sensitivity to basic parameters.” ACI Materials Journal, Vol. 104, 2007, pp. 360.10.14359/18825]Search in Google Scholar
[91. Altoubat S A & Lange D A: “Creep, shrinkage, and cracking of restrained concrete at early age.” ACI Materials Journal, Vol. 98, 2001, pp. 323-331.10.14359/10401]Search in Google Scholar
[92. https://batman.trafikverket.se.]Search in Google Scholar
[93. https://www.trafikverket.se/contentassets/359d9886c7504d349fe243739707a725/direktgjuten_slitbetong_den_enkla_och_kostnadseffektiva_metoden.pdf (downloaded December 2019)]Search in Google Scholar