Accès libre

KazStandard Primary Dew/Frost Point Generator

Assylbek Zhumagali

Assylbek Zhumagali

  • Kazakhstan Institute of Standardization and MetrologyAstana, Kazakhstan
  • Tomsk Polytechnic UniversityTomsk, Russia
Profil Orcid
Recherchez cet auteur sur
Sciendo|Google Scholar
Zhumagali, Assylbek
, 
Temirbolat Akimzhanov

Temirbolat Akimzhanov

S. Seifullin Kazakh Agro Technical Research UniversityAstana, Kazakhstan
Recherchez cet auteur sur
Sciendo|Google Scholar
Akimzhanov, Temirbolat
, 
Raiymbek Zhumagali

Raiymbek Zhumagali

NIU MIETZelenograd, Russia
Recherchez cet auteur sur
Sciendo|Google Scholar
Zhumagali, Raiymbek
, 
Sultanbek Smagulov

Sultanbek Smagulov

  • Kazakhstan Institute of Standardization and MetrologyAstana, Kazakhstan
  • Tomsk Polytechnic UniversityTomsk, Russia
Profil Orcid
Recherchez cet auteur sur
Sciendo|Google Scholar
Smagulov, Sultanbek
 et 
Bahytkul Baihozhaeva

Bahytkul Baihozhaeva

L.N. Gumilyov Eurasian National UniversityAstana, Kazakhstan
Profil Orcid
Recherchez cet auteur sur
Sciendo|Google Scholar
Baihozhaeva, Bahytkul
  
31 juil. 2025
KazStandard Primary Dew/Frost Point Generator's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 31 juil. 2025
Pages: 172 - 177
Reçu: 04 déc. 2024
Accepté: 07 juil. 2025
DOI: https://doi.org/10.2478/msr-2025-0021
Mots clés
© 2025 Assylbek Zhumagali et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Fig. 1.

Diagram of the KazStandard humidity generator.
Diagram of the KazStandard humidity generator.

Fig. 2.

Drawing of a saturator with a heat exchanger.
Drawing of a saturator with a heat exchanger.

Fig. 3.

Switching to negative dew point temperature of −18 °C.
Switching to negative dew point temperature of −18 °C.

Fig. 4.

Temperature distribution according to the saturator design at a bath temperature of −20 °C.
Temperature distribution according to the saturator design at a bath temperature of −20 °C.

Fig. 5.

Dew point temperature stabilization.
Dew point temperature stabilization.

Fig. 6.

The difference in uncertainty between before and after the development of a humidity generator.
The difference in uncertainty between before and after the development of a humidity generator.

Fig. 7.

Dependence of the uncertainty of the generator on the volume of the saturator bath.
Dependence of the uncertainty of the generator on the volume of the saturator bath.

Uncertainty budget at −10 °C dew point temperature_

Source Value Distribution Divisor Sensitivity coefficient Standard uncertainty
Repeatability SPRT 0.001 Normal 1 1 0.001
SPRT calibration 0.003 Normal 2 1 0.0015
SPRT resolution (indicator unit) 0.001 Rectangular 3.46 1 0.000289
Bridge calibration 0.0001 Normal 2 2.6 0.00013
Bath stability 0.01 Rectangular 1.73 1 0.00578
Bath homogenity 0.01 Rectangular 1.73 1 0.00578
Saturator efficiency 0.106 Rectangular 1.73 1 0.06127
Dew-point hygrometer calibration 0.06 Normal 2 1 0.03
Resolution of hygrometer 0.01 Rectangular 3.46 1 0.00289
Combined uncertainty 0.069
Expanded uncertainty (k = 2) 0.14

Measurement results_

No. Saturation temperature t(SPRT) [°C] Measured value of the hygrometer t(CMH) [°C] Difference Δt = t(SPRT) –t(CMH) [°C] Extended uncertainty [°C]
1 −50.074 −49.63 −0.444 0.52
2 −40.077 −39.83 −0.247 0.29
3 −30.058 −29.96 −0.098 0.13
4 −20.025 −19.95 −0.075 0.11
5 −10.076 −9.97 −0.106 0.14
6 0.034 0.05 −0.016 0.06
7 10.006 9.92 0.086 0.12
8 20.008 19.91 0.098 0.13
Langue:
Anglais
Périodicité:
6 fois par an
Sujets de la revue:
Ingénierie, Ingénierie électrique, Ingénierie de contrôle, métrologie et essais
RSS Feed de la revue