Accès libre

Measurement of Maximum Deviation from Roundness Based on the Inverse Kinematics Principle

Tomáš Stejskal

Tomáš Stejskal

Technical University of Košice, Faculty of Mechanical Engineering, Department of Production EngineeringKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Stejskal, Tomáš
, 
Miroslav Dovica

Miroslav Dovica

Technical University of Košice, Faculty of Mechanical Engineering, Department of Biomedical Engineering and MeasurementKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Dovica, Miroslav
, 
Tatiana Kelemenová

Tatiana Kelemenová

Technical University of Košice, Faculty of Mechanical Engineering, Department of Biomedical Engineering and MeasurementKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Kelemenová, Tatiana
, 
Dominika Palaščáková

Dominika Palaščáková

Technical University of Košice, Faculty of Mechanical Engineering, Department of Production EngineeringKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Palaščáková, Dominika
, 
Eduard Jakubkovič

Eduard Jakubkovič

Technical University of Košice, Faculty of Mechanical Engineering, Department of Biomedical Engineering and MeasurementKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Jakubkovič, Eduard
, 
Michal Považan

Michal Považan

Technical University of Košice, Faculty of Mechanical Engineering, Department of Production EngineeringKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Považan, Michal
 et 
Štefan Ondočko

Štefan Ondočko

Technical University of Košice, Faculty of Mechanical Engineering, Department of Production EngineeringKošice, Slovakia
Recherchez cet auteur sur
Sciendo|Google Scholar
Ondočko, Štefan
  
21 nov. 2019
Measurement of Maximum Deviation from Roundness Based on the Inverse Kinematics Principle's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 21 nov. 2019
Pages: 271 - 278
Reçu: 05 juin 2019
Accepté: 31 oct. 2019
DOI: https://doi.org/10.2478/msr-2019-0035
Mots clés
© 2019 Tomáš Stejskal et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Langue:
Anglais
Périodicité:
6 fois par an
Sujets de la revue:
Ingénierie, Ingénierie électrique, Ingénierie de contrôle, métrologie et essais
RSS Feed de la revue