Comparison of the quality of rail steel from the nineteenth century converter processes and the modern oxygen-converter process

[1] Encyclopedia of Technology – Metallurgy, 1st edition. Śląsk Publishing House, Reference 10345/E, Katowice, 1985 Encyclopedia of Technology – Metallurgy, 1st edition. Śląsk Publishing House, Reference 10345/E, Katowice 1985 Search in Google Scholar

[2] https://mlodytechnik.pl/technika/30619-dziecko-i-zarazem-ojciec-rewolucji-przemyslowej-henry-bessemer mlodytechnik.pl https://mlodytechnik.pl/technika/30619-dziecko-i-zarazem-ojciec-rewolucji-przemyslowej-henry-bessemer Search in Google Scholar

[3] https://pl.wikipedia.org/wiki/Henry_Bessemer pl.wikipedia.org https://pl.wikipedia.org/wiki/Henry_Bessemer Search in Google Scholar

[4] https://pl.frwiki.wiki/wiki/Proc%C3%A9d%C3%A9_Thomas pl.frwiki.wiki https://pl.frwiki.wiki/wiki/Proc%C3%A9d%C3%A9_Thomas Search in Google Scholar

[5] Pater, Z., Basics of metallurgy and foundry, Lublin University of Technology, Lublin, 2014, ISBN: 978-83-7947-088-4 Pater Z. Basics of metallurgy and foundry Lublin University of Technology Lublin 2014 ISBN: 978-83-7947-088-4 Search in Google Scholar

[6] https://encyklopedia.pwn.pl/haslo/martenowski-proces;3938127.html encyklopedia.pwn.pl https://encyklopedia.pwn.pl/haslo/martenowski-proces;3938127.html Search in Google Scholar

[7] Przybyłowicz, K., Iron alloys engineering, Publishing House of the Kielce University of Technology, Kielce, 2008 Przybyłowicz K. Iron alloys engineering Publishing House of the Kielce University of Technology Kielce 2008 Search in Google Scholar

[8] Irving, W.R., Continuous casting of steel, The Institute of Materials Great Britain, 1993, ISBN 0 901716 53 7 Irving W.R. Continuous casting of steel The Institute of Materials Great Britain 1993 ISBN 0 901716 53 7 Search in Google Scholar

[9] EN 13674-1:2011 + A1:2017, Railways – Track – Rail, part 2: Vignole railway rails 46 kg/m and above, CEN-CENELEC Managemnet Centre, Brussels, 2017 EN 13674-1:2011 + A1:2017 Railways – Track – Rail, part 2: Vignole railway rails 46 kg/m and above, CEN-CENELEC Managemnet Centre, Brussels 2017 Search in Google Scholar

[10] Żak, S., Quality report on railway production in 2021 year enclosing chemical composition and mechanical properties of rails in steel grade R260, AMP Mat., unpublished; 2021, p. 1–16 Żak S. Quality report on railway production in 2021 year enclosing chemical composition and mechanical properties of rails in steel grade R260 AMP Mat. unpublished 2021 p. 1 16 Search in Google Scholar

[11] Żak, S., Sarna, J., Merta, J., Quality assessment of Huta Katowice production rails, Published materials of the 23 Scientific and Technical Conference on Huta Katowice S.A., 2003, p. 32–48 Żak S. Sarna J. Merta J. Quality assessment of Huta Katowice production rails Published materials of the 23 Scientific and Technical Conference on Huta Katowice S.A. 2003 p. 32 48 Search in Google Scholar

[12] Bałuch, H., Perspektywy zmniejszenia wad powierzchniowych szyn, Materiały V Ogólnopolskiej Konferencji Technicznej Spawalnictwo Dróg Szynowych, Kraków: 2013 Bałuch H. Perspektywy zmniejszenia wad powierzchniowych szyn Materiały V Ogólnopolskiej Konferencji Technicznej Spawalnictwo Dróg Szynowych Kraków 2013 Search in Google Scholar

[13] Kowalczyk, D., Antolik, Ł., Mikłaszewicz, I., Researches of the head check defect in rails using CT method as a part of the process focused on optimalisation ultrasonic transducers system, Proceedings of 48th National Conference of Non-destructive Testing (KKBN), Wisła, Poland, Published by „Badania Nieniszczące i Diagnostyka” SIMP Publishing Agenda; 2019, p. 45–48, 10.26357/BNiD.2019.024 Kowalczyk D. Antolik Ł. Mikłaszewicz I. Researches of the head check defect in rails using CT method as a part of the process focused on optimalisation ultrasonic transducers system Proceedings of 48th National Conference of Non-destructive Testing (KKBN), Wisła, Poland Published by „Badania Nieniszczące i Diagnostyka” SIMP Publishing Agenda 2019 p. 45 48 10.26357/BNiD.2019.024 Open DOI

[14] Lesiak, P., Wlazło, M., Badania wad Head Cecking w szynach kolejowych metoda optyczną”. Prace Naukowe Politechniki warszawskiej z, Transport, 2014, 104: 33–42 Lesiak P. Wlazło M. Badania wad Head Cecking w szynach kolejowych metoda optyczną”. Prace Naukowe Politechniki warszawskiej z Transport 2014 104 33 42 Search in Google Scholar

[15] Popović, Z., Radović, V., Lazarević, L., Vukadinović, V., Tepić, G., Rail inspection on RCF defects, Metalurgija, 2013, 52(4): 537–540 Popović Z. Radović V. Lazarević L. Vukadinović V. Tepić G. Rail inspection on RCF defects Metalurgija 2013 52 4 537 540 Search in Google Scholar

[16] Tomićić-Trolaković, M., Guidelines for the rail grade selection, Metalurgija, 2014, 53(4): 717–720 Tomićić-Trolaković M. Guidelines for the rail grade selection Metalurgija 2014 53 4 717 720 Search in Google Scholar

[17] Bałuch, H., Zagrożenia w nawierzchni kolejowej – badania i przeciwdziałanie, Problemy Kolejnictwa, Zeszyt, 2013, 158: 89–109 Bałuch H. Zagrożenia w nawierzchni kolejowej – badania i przeciwdziałanie Problemy Kolejnictwa, Zeszyt 2013 158 89 109 Search in Google Scholar

[18] Grulkowski, S., Kędra, Z., Zariczny, J., Problemy diagnostyki szyn kolejowych w torach i rozjazdach, Inżynieria Morska i Geotechnika, 2014, 5: 497–504 Grulkowski S. Kędra Z. Zariczny J. Problemy diagnostyki szyn kolejowych w torach i rozjazdach Inżynieria Morska i Geotechnika 2014 5 497 504 Search in Google Scholar

[19] Licow, R., Tomaszewski, F., Identyfikacja wad powierzchni tocznej szyn za pomocą sygnału wibroakustycznego, Problemy Kolejnictwa, Zeszyt, 2019, 184: 71–76 Licow R. Tomaszewski F. Identyfikacja wad powierzchni tocznej szyn za pomocą sygnału wibroakustycznego Problemy Kolejnictwa, Zeszyt 2019 184 71 76 Search in Google Scholar

[20] Licow, R., Tomaszewski, F., Analysis of the reasons to wear and damage the rails depending on technical - operating conditions of the track, Rail Vehicles, 2017, 4: 1–9 Licow R. Tomaszewski F. Analysis of the reasons to wear and damage the rails depending on technical - operating conditions of the track Rail Vehicles 2017 4 1 9 Search in Google Scholar

[21] Jabłońska, M., Lewandowski, F., Chmiela, B., Gronostajski, Z., Advanced heat treatment of pearlitic rail steel, Materials, 2023, 16: 6430 Jabłońska M. Lewandowski F. Chmiela B. Gronostajski Z. Advanced heat treatment of pearlitic rail steel Materials 2023 16 6430 Search in Google Scholar

[22] Królicka, A., Lesiuk, G., Radwański, K., Kuziak, R., Janik, A., Mech, R., et al., Comparison of fatigue crack growth rate: pearlitic rail versus bainitic rail, Int. J. Fatigue, 2021, 149: 106280 Królicka A. Lesiuk G. Radwański K. Kuziak R. Janik A. Mech R. Comparison of fatigue crack growth rate: pearlitic rail versus bainitic rail Int. J. Fatigue 2021 149 106280 Search in Google Scholar

[23] Li, G., Liu, Z., Chen, L., Hou, X., Numerical calculation of the comprehensive heat transfer coefficient on the surface of rail in the spray cooling process, J. Met. Eng., 2015, 4: 13–17 Li G. Liu Z. Chen L. Hou X. Numerical calculation of the comprehensive heat transfer coefficient on the surface of rail in the spray cooling process J. Met. Eng. 2015 4 13 17 Search in Google Scholar

[24] Dean, S.W., Sahay, S.S., Mohapatra, G., Totten, G.E., Overview of pearlitic rail steel: accelerated cooling, quenching, microstructure and mechanical properties, J. ASTM Int., 2009, 6: 1–26 Dean S.W. Sahay S.S. Mohapatra G. Totten G.E. Overview of pearlitic rail steel: accelerated cooling, quenching, microstructure and mechanical properties J. ASTM Int. 2009 6 1 26 Search in Google Scholar

[25] Kuziak, R., Pidvysots’kyy, V., Rauch, Ł., Pietrzyk, M., Zygmunt, T., Method for heat treatment of the running surface of the head of the pearlitic steel rails, J. Met. Mater., 2021, 73: 9–15 Kuziak R. Pidvysots’kyy V. Rauch Ł. Pietrzyk M. Zygmunt T. Method for heat treatment of the running surface of the head of the pearlitic steel rails J. Met. Mater. 2021 73 9 15 Search in Google Scholar

[26] Kuziak, R., Pidvysots’kyy, V., Pernach, M., Rauch, Ł., Zygmunt, T., Pietrzyk, M., Selection of the best phase transformation model for optimization of manufacturing processes of pearlitic steel rails, Arch. Civ. Mech. Eng., 2019, 19: 535–546 Kuziak R. Pidvysots’kyy V. Pernach M. Rauch Ł. Zygmunt T. Pietrzyk M. Selection of the best phase transformation model for optimization of manufacturing processes of pearlitic steel rails Arch. Civ. Mech. Eng. 2019 19 535 546 Search in Google Scholar

[27] Malkiewicz, T., Metallurgy of iron alloys, Warsaw-Kraków: National Scientific Publishing House; 1976 Malkiewicz T. Metallurgy of iron alloys Warsaw-Kraków National Scientific Publishing House 1976 Search in Google Scholar

[28] Żak, S., Woźniak, D., Residual stresses in railway rails. Monograph No. 18, Monographs Publishing House of the Ferrous Metallurgy Institute, Gliwice, 2022, ISBN: 978-83-958775-7-5 Żak S. Woźniak D. Residual stresses in railway rails. Monograph No. 18 Monographs Publishing House of the Ferrous Metallurgy Institute Gliwice 2022 ISBN: 978-83-958775-7-5 Search in Google Scholar