<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This study investigates the blast mitigation capabilities of A286 steel micro-lattice structures produced through additive manufacturing. The research explores the effects of different manufacturing conditions, such as stress relief and heat treatment, on the mechanical properties and blast resistance of honeycomb and gyroid lattice structures in correlation with armour steel structures. Comprehensive evaluations, including surface morphology, corrosion resistance, and compressive residual stress analysis, reveal notable findings for micro-lattice structures. Micro-lattice structures demonstrated 57.23% higher corrosion resistance compared to conventional materials, presently available in the form of rolled homogeneous armour, medium hardness armour, and high-nitrogen steel. Additionally, honeycomb lattice structures exhibit compressive residual stresses of up to 581.90 MPa, providing significant advantages in blast mitigation potential. These results underscore the significance of lattice geometry, material microstructure, and residual stress in enhancing blast resistance. The research offers valuable insights into optimizing additive manufactured structures as an alternative modular solution for defence applications.</p>
</abstract>

This study investigates the blast mitigation capabilities of A286 steel micro-lattice structures produced through additive manufacturing. The research explores the effects of different manufacturing conditions, such as stress relief and heat treatment, on the mechanical properties and blast resistance of honeycomb and gyroid lattice structures in correlation with armour steel structures. Comprehensive evaluations, including surface morphology, corrosion resistance, and compressive residual stress analysis, reveal notable findings for micro-lattice structures. Micro-lattice structures demonstrated 57.23% higher corrosion resistance compared to conventional materials, presently available in the form of rolled homogeneous armour, medium hardness armour, and high-nitrogen steel. Additionally, honeycomb lattice structures exhibit compressive residual stresses of up to 581.90 MPa, providing significant advantages in blast mitigation potential. These results underscore the significance of lattice geometry, material microstructure, and residual stress in enhancing blast resistance. The research offers valuable insights into optimizing additive manufactured structures as an alternative modular solution for defence applications.

Investigation of additive manufactured micro-lattice structures for defence applications

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This study investigates the blast mitigation capabilities of A286 steel micro-lattice structures produced through additive manufacturing. The research explores...

Investigation of additive manufactured micro-lattice structures for defence applications

Publié en ligne: 29 nov. 2023

Pages: 383 - 400

Reçu: 04 août 2023

Accepté: 13 sept. 2023

DOI: https://doi.org/10.2478/msp-2023-0023

Mots clés
additive manufacturing, corrosion, hardness, micro-lattice, morphology, residual stress

© 2023 Ameer Malik Shaik et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Investigation of additive manufactured micro-lattice structures for defence applications

Publié en ligne: 29 nov. 2023

Pages: 383 - 400

Reçu: 04 août 2023

Accepté: 13 sept. 2023

DOI: https://doi.org/10.2478/msp-2023-0023

Mots clésadditive manufacturing, corrosion, hardness, micro-lattice, morphology, residual stress

© 2023 Ameer Malik Shaik et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
additive manufacturing, corrosion, hardness, micro-lattice, morphology, residual stress