<abstract xmlns="http://www.w3.org/1999/xhtml">

Magnesium composites are innovative, compact, and distinctive materials. Because of their low density, magnesium composites are suitable for applications in the automobile, aviation, semiconductor, and pharmaceutical sectors. To enhance the mechanical wear and corrosion behavior of theAZ61 Mg alloy, different weight percentages of nano-B4C reinforcements (2.5, 5, 7.5, and 10wt%) were strengthened with magnesium matrix. Fabrication of magnesium composites was achieved through the stir casting method. The as-cast specimens were subjected to microstructural analysis, which showed that the B4C nanoparticles were dispersed uniformly, well bonded to the matrix, and had a minimal level of porosity. This shows that the inclusion of B4C nanoparticles has aninsignificanteffect on the microstructure of the as-cast material. The material’s tensile strength, compressive strength, hardness, corrosion resistance, and wear resistance were all greatly increased by the Mg17Al12 phase’s fracture and dispersion. Scanning electron microscopy was utilized to inspect the surfaces of AZ61/B4C nanocomposites and witnessed the uniform dispersal of reinforcement within the matrix.The maximum value for mechanical properties was obtained for AZ61/7.5wt%B4C nanocomposite and the lowest value was found to be the corrosion test. These results show that the AZ61/7.5wt%B4C nanocomposite is a superior material for aerospace and automotive engineering components where high compressive strength, corrosion resistance, and wear resistance are required.
</abstract>

Magnesium composites are innovative, compact, and distinctive materials. Because of their low density, magnesium composites are suitable for applications in the automobile, aviation, semiconductor, and pharmaceutical sectors. To enhance the mechanical wear and corrosion behavior of theAZ61 Mg alloy, different weight percentages of nano-B4C reinforcements (2.5, 5, 7.5, and 10wt%) were strengthened with magnesium matrix. Fabrication of magnesium composites was achieved through the stir casting method. The as-cast specimens were subjected to microstructural analysis, which showed that the B4C nanoparticles were dispersed uniformly, well bonded to the matrix, and had a minimal level of porosity. This shows that the inclusion of B4C nanoparticles has aninsignificanteffect on the microstructure of the as-cast material. The material’s tensile strength, compressive strength, hardness, corrosion resistance, and wear resistance were all greatly increased by the Mg17Al12 phase’s fracture and dispersion. Scanning electron microscopy was utilized to inspect the surfaces of AZ61/B4C nanocomposites and witnessed the uniform dispersal of reinforcement within the matrix.The maximum value for mechanical properties was obtained for AZ61/7.5wt%B4C nanocomposite and the lowest value was found to be the corrosion test. These results show that the AZ61/7.5wt%B4C nanocomposite is a superior material for aerospace and automotive engineering components where high compressive strength, corrosion resistance, and wear resistance are required.

Investigation of the mechanical, corrosion, and tribological characteristics of AZ61 Mg with boron carbide nano particles via the stir casting route

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Magnesium composites are innovative, compact, and distinctive materials. Because of their low density, magnesium composites are suitable for applications in...

Investigation of the mechanical, corrosion, and tribological characteristics of AZ61 Mg with boron carbide nano particles via the stir casting route

Publié en ligne: 19 sept. 2023

Pages: 227 - 243

Reçu: 28 janv. 2023

Accepté: 17 juil. 2023

DOI: https://doi.org/10.2478/msp-2023-0019

Mots clés
AZ61/BC nanocomposite, mechanical properties, corrosion behavior, stir casting, tribological characteristics, Grey Taguchi technique

© 2023 S. Sakthi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Investigation of the mechanical, corrosion, and tribological characteristics of AZ61 Mg with boron carbide nano particles via the stir casting route

Publié en ligne: 19 sept. 2023

Pages: 227 - 243

Reçu: 28 janv. 2023

Accepté: 17 juil. 2023

DOI: https://doi.org/10.2478/msp-2023-0019

Mots clésAZ61/BC nanocomposite, mechanical properties, corrosion behavior, stir casting, tribological characteristics, Grey Taguchi technique

© 2023 S. Sakthi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Mots clés
AZ61/BC nanocomposite, mechanical properties, corrosion behavior, stir casting, tribological characteristics, Grey Taguchi technique