This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Darolia R. Development of strong, oxidation and corrosion resistant nickel-based superalloys: critical review of challenges, progress and prospects. Int Mater Rev. 2019;64(6): 355–80. doi:10.1080/09506608.2018.1516713.DaroliaRDevelopment of strong, oxidation and corrosion resistant nickel-based superalloys: critical review of challenges, progress and prospectsInt Mater Rev.20196463558010.1080/09506608.2018.1516713Open DOISearch in Google Scholar
Farahmand P, Kovacevic R. Corrosion and wear behavior of laser cladded Ni-WC coatings. Surf Coat Technol. 2015;276: 121–35. doi:10.1016/j.surfcoat.2015.06.039.FarahmandPKovacevicRCorrosion and wear behavior of laser cladded Ni-WC coatingsSurf Coat Technol.20152761213510.1016/j.surfcoat.2015.06.039Open DOISearch in Google Scholar
Deng P, Yao C, Feng K, Huang X, Li Z, Li Y, et al. Enhanced wear resistance of laser cladded graphene nanoplatelets reinforced Inconel 625 superalloy composite coating. Surf Coat Technol. 2018;335: 334–44. doi:10.1016/j.surfcoat.2017.12.047.DengPYaoCFengKHuangXLiZLiYEnhanced wear resistance of laser cladded graphene nanoplatelets reinforced Inconel 625 superalloy composite coatingSurf Coat Technol.20183353344410.1016/j.surfcoat.2017.12.047Open DOISearch in Google Scholar
Chen Y, Lu F, Zhang J, Nie P, Hosseini SRE, Feng K, et al. Laser powder deposition of carbon nanotube reinforced nickel-based superalloy Inconel 718. Carbon. 2016;107: 361–70. doi:10.1016/j.carbon.2016.06.014.ChenYLuFZhangJNiePHosseiniSREFengKLaser powder deposition of carbon nanotube reinforced nickel-based superalloy Inconel 718Carbon.20161073617010.1016/j.carbon.2016.06.014Open DOISearch in Google Scholar
Lei J, Shi C, Zhou S, Gu Z, Zhang LC. Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding. Surf Coat Technol. 2018;334: 274–85. doi:10.1016/j.surfcoat.2017.11.051.LeiJShiCZhouSGuZZhangLCEnhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser claddingSurf Coat Technol.20183342748510.1016/j.surfcoat.2017.11.051Open DOISearch in Google Scholar
Janicki D, Musztyfaga-Staszuk M. Direct diode laser cladding of Inconel 625/WC composite coatings. Stroj Vestn/J Mech Eng. 2016;62(6): 363–72. doi:10.5545/svjme.2015.3194.JanickiDMusztyfaga-StaszukMDirect diode laser cladding of Inconel 625/WC composite coatingsStroj Vestn/J Mech Eng.20166263637210.5545/svjme.2015.3194Open DOISearch in Google Scholar
Hong C, Gu D, Dai D, Gasser A, Weisheit A, Kelbassa I, et al. Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures. Opt Laser Technol. 2013;54: 98–109. doi:10.1016/j.optlastec.2013.05.011.HongCGuDDaiDGasserAWeisheitAKelbassaILaser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructuresOpt Laser Technol.2013549810910.1016/j.optlastec.2013.05.011Open DOISearch in Google Scholar
Pizzatto A, Teixeira MF, Rabelo A, Falcade T, Scheid A. Microstructure and wear behavior of NbC-reinforced Ni-based alloy composite coatings by laser cladding. Mater Res. 2021;24(3): e20200447. doi:10.1590/1980-5373-MR-2020-0447.PizzattoATeixeiraMFRabeloAFalcadeTScheidAMicrostructure and wear behavior of NbC-reinforced Ni-based alloy composite coatings by laser claddingMater Res.2021243e2020044710.1590/1980-5373-MR-2020-0447Open DOISearch in Google Scholar
Yu T, Tang H. Microstructure and high-temperature wear behavior of laser clad TaC-reinforced Ni-Al-Cr coating. Appl Surf Sci. 2022;592: 153263. doi:10.1016/j.apsusc.2022.153263.YuTTangHMicrostructure and high-temperature wear behavior of laser clad TaC-reinforced Ni-Al-Cr coatingAppl Surf Sci.202259215326310.1016/j.apsusc.2022.153263Open DOISearch in Google Scholar
Janicki D. Laser cladding of Inconel 625-based composite coatings reinforced by porous chromium carbide particles. Opt Laser Technol. 2017;94: 6–14. doi:10.1016/j.optlastec.2017.03.007.JanickiDLaser cladding of Inconel 625-based composite coatings reinforced by porous chromium carbide particlesOpt Laser Technol.20179461410.1016/j.optlastec.2017.03.007Open DOISearch in Google Scholar
Xu Z, Xie Y, Ebrahimnia M, Dang H. Effect of B4C nanoparticles on microstructure and properties of laser cladded IN625 coating. Surf Coat Technol. 2021;416: 127154. doi:10.1016/j.surfcoat.2021.127154.XuZXieYEbrahimniaMDangHEffect of B4C nanoparticles on microstructure and properties of laser cladded IN625 coatingSurf Coat Technol.202141612715410.1016/j.surfcoat.2021.127154Open DOISearch in Google Scholar
Muvvala G, Karmakar DP, Nath AK. Online assessment of TiC decomposition in laser cladding of metal matrix composite coating. Mater Des. 2017;121: 310–20. doi:10.1016/j.matdes.2017.02.061.MuvvalaGKarmakarDPNathAKOnline assessment of TiC decomposition in laser cladding of metal matrix composite coatingMater Des.20171213102010.1016/j.matdes.2017.02.061Open DOISearch in Google Scholar
Chen L, Yu T, Chen X, Zhao Y, Guan C. Process optimization, microstructure and microhardness of coaxial laser cladding TiC reinforced Ni-based composite coatings. Opt Laser Technol. 2022;152: 108129. doi:10.1016/j.optlastec.2022.108129.ChenLYuTChenXZhaoYGuanCProcess optimization, microstructure and microhardness of coaxial laser cladding TiC reinforced Ni-based composite coatingsOpt Laser Technol.202215210812910.1016/j.optlastec.2022.108129Open DOISearch in Google Scholar
Kotarska A, Poloczek T, Janicki D. Characterization of the structure, mechanical properties and erosive resistance of the laser cladded Inconel 625-based coatings reinforced by TiC particles. Materials. 2021;14: 2225. doi:10.3390/ma14092225.KotarskaAPoloczekTJanickiDCharacterization of the structure, mechanical properties and erosive resistance of the laser cladded Inconel 625-based coatings reinforced by TiC particlesMaterials.202114222510.3390/ma14092225Open DOISearch in Google Scholar
Kołodziejczak P, Bober M, Chmielewski T. Wear resistance comparison research of high-alloy protective coatings for power industry prepared by means of CMT cladding. Appl. Sci. 2022;12: 4568. doi:10.3390/app12094568.KołodziejczakPBoberMChmielewskiTWear resistance comparison research of high-alloy protective coatings for power industry prepared by means of CMT claddingAppl. Sci202212456810.3390/app12094568Open DOISearch in Google Scholar
Czupryński A, Mele C. Properties of flame spraying coatings reinforced with particles of carbon nanotubes. Adv Mater Sci. 2021;21(1): 57–76. doi:10.2478/adms-2021-0005.CzupryńskiAMeleCProperties of flame spraying coatings reinforced with particles of carbon nanotubesAdv Mater Sci.2021211577610.2478/adms-2021-0005Open DOISearch in Google Scholar
Kotarska A. The laser alloying process of ductile cast iron surface with titanium. Metals. 2021;11(2): 282. doi:10.3390/met11020282.KotarskaAThe laser alloying process of ductile cast iron surface with titaniumMetals.202111228210.3390/met11020282Open DOISearch in Google Scholar
Poloczek T, Janicki D, Górka J, Kotarska A. Effect of Ti and C alloyants on the microstructure of laser cladded cobalt-chromium coatings. IOP Conf Ser Mater Sci Eng. 2021;1182: 012063. doi:10.1088/1757-899X/1182/1/012063.PoloczekTJanickiDGórkaJKotarskaAEffect of Ti and C alloyants on the microstructure of laser cladded cobalt-chromium coatingsIOP Conf Ser Mater Sci Eng.2021118201206310.1088/1757-899X/1182/1/012063Open DOISearch in Google Scholar
Janicki D. In-situ synthesis of titanium carbide particles in and iron matrix during diode-laser surface alloying of ductile cast iron. Mater Technol. 2017;51(2): 317–21. doi:10.17222/mit.2015.198.JanickiDIn-situ synthesis of titanium carbide particles in and iron matrix during diode-laser surface alloying of ductile cast ironMater Technol.20175123172110.17222/mit.2015.198Open DOISearch in Google Scholar
Lont A, Górka J, Janicki D, Matus K. The laser alloying process of ductile cast iron surface with titanium powder in nitrogen atmosphere. Coatings. 2022;12(2): 227. doi:10.3390/coatings12020227.LontAGórkaJJanickiDMatusKThe laser alloying process of ductile cast iron surface with titanium powder in nitrogen atmosphereCoatings.202212222710.3390/coatings12020227Open DOISearch in Google Scholar
Shuting S, Hanguang F, Xuelong P, Xingye G, Jian L, Yongping L, et al. Effect of liquid nitrogen cooling on grain growth and properties of laser cladding in-situ (Ti, Nb)C/Ni composite coatings. Mater Charact. 2019;152: 115–29. doi:10.1016/j.matchar.2019.04.012.ShutingSHanguangFXuelongPXingyeGJianLYongpingLEffect of liquid nitrogen cooling on grain growth and properties of laser cladding in-situ (Ti, Nb)C/Ni composite coatingsMater Charact.20191521152910.1016/j.matchar.2019.04.012Open DOISearch in Google Scholar
Chen L, Zhao Y, Meng F, Yu T, Ma Z, Qu S, et al. Effect of TiC content on the microstructure and wear performance of in situ synthesized Ni-based composite coatings by laser direct energy deposition. Surf Coat Technol. 2022;444: 128678. doi:10.1016/j.surfcoat.2022.128678.ChenLZhaoYMengFYuTMaZQuSEffect of TiC content on the microstructure and wear performance of in situ synthesized Ni-based composite coatings by laser direct energy depositionSurf Coat Technol.202244412867810.1016/j.surfcoat.2022.128678Open DOISearch in Google Scholar
Gao Z, Geng H, Qiao Z, Sun B, Gao Z, Zhang C. In situ TiBX/TiX NiY/TiC reinforced Ni60 composites by laser cladding and its effect on the tribological properties. Ceram Int. 2023;49: 6409–18. doi:10.1016/j.ceramint.2022.10.087.GaoZGengHQiaoZSunBGaoZZhangCIn situ TiBX/TiX NiY/TiC reinforced Ni60 composites by laser cladding and its effect on the tribological propertiesCeram Int.20234964091810.1016/j.ceramint.2022.10.087Open DOISearch in Google Scholar
Wu F, Chen T, Wang H, Liu D. Effect of Mo on microstructures and wear properties in situ synthesized Ti(C,N)/Ni-based composite coatings by laser cladding. Materials. 2017;10: 1047. doi:10.3390/ma10091047.WuFChenTWangHLiuDEffect of Mo on microstructures and wear properties in situ synthesized Ti(C,N)/Ni-based composite coatings by laser claddingMaterials.201710104710.3390/ma10091047Open DOISearch in Google Scholar
Muvvala G, Karmakar DP, Nath AK. In-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coating. J Alloys Compd. 2018;740: 545–58. doi:10.1016/j.jallcom.2017.12.364.MuvvalaGKarmakarDPNathAKIn-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coatingJ Alloys Compd.20187405455810.1016/j.jallcom.2017.12.364Open DOISearch in Google Scholar
ASTM International. E407-99. Standard practice for microetching metals and alloys. PA, USA; 1999.ASTM International. E407-99Standard practice for microetching metals and alloysPA, USA1999Search in Google Scholar
ASTM International. G76-04. Standard test method for conducting erosion tests by solid particle impingement using gas jets. PA, USA; 2004.ASTM International. G76-04Standard test method for conducting erosion tests by solid particle impingement using gas jetsPA, USA2004Search in Google Scholar
Cieslak MJ, Headley TJ, Romig AD, Kollie T. A melting and solidification study of alloy 625. Metall Trans A. 1988;19A: 2319–31. doi:10.1007/BF02645056.CieslakMJHeadleyTJRomigADKollieTA melting and solidification study of alloy 625Metall Trans A.198819A23193110.1007/BF02645056Open DOISearch in Google Scholar
Cieslak MJ. The welding and solidification metallurgy of alloy 625. Weld J. 1991;70: 49–56.CieslakMJThe welding and solidification metallurgy of alloy 625Weld J.1991704956Search in Google Scholar
Stachowiak GW, Batchelor AW. Engineering tribology. Oxford: Butterworth-Heinemann; 2014. p. 551–6.StachowiakGWBatchelorAWEngineering tribologyOxfordButterworth-Heinemann20145516Search in Google Scholar
Solecka M, Kopyściański M, Kusiński J, Kopia A, Radziszewska A. Erosive wear of Inconel 625 alloy coatings deposited by CMT method. Arch Metall Mater. 2016;61(2B): 1201–6. doi:10.1515/amm-2016-0199.SoleckaMKopyściańskiMKusińskiJKopiaARadziszewskaAErosive wear of Inconel 625 alloy coatings deposited by CMT methodArch Metall Mater.2016612B1201610.1515/amm-2016-0199Open DOISearch in Google Scholar