Al₂O₃-TiO₂ coatings deposition by intermixed and double injection SPS concepts

[1] Potthoff A, Kratzsch R, Barbosa M, Kulissa N, Kunze O, Toma F-L. Development and application of binary suspensions in the ternary system Cr₂O₃/TiO₂/Al₂O₃ for S-HVOF spraying. J Therm Spray Tech. 2018 Apr 1;27(4):710–7. PotthoffA KratzschR BarbosaM KulissaN KunzeO TomaF-L Development and application of binary suspensions in the ternary system Cr₂O₃/TiO₂/Al₂O₃ for S-HVOF spraying J Therm Spray Tech 2018 Apr 1 27 4 710 7 10.1007/s11666-018-0709-z Search in Google Scholar

[2] Michalak M, Łatka L, Sokołowski P, Toma F-L, Myalska H, Denoirjean A, et al. Microstructural, mechanical and tribological properties of finely grained Al₂O₃ coatings obtained by SPS and S-HVOF methods. Surface and Coatings Technology. 2020 Dec 25;404:126463. MichalakM ŁatkaL SokołowskiP TomaF-L MyalskaH DenoirjeanA Microstructural, mechanical and tribological properties of finely grained Al₂O₃ coatings obtained by SPS and S-HVOF methods Surface and Coatings Technology 2020 Dec 25 404 126463 10.1016/j.surfcoat.2020.126463 Search in Google Scholar

[3] Fauchais P, Joulia A, Goutier S, Chazelas C, Vardelle M, Vardelle A, et al. Suspension and solution plasma spraying. J Phys D: Appl Phys. 2013;46(22):224015. FauchaisP JouliaA GoutierS ChazelasC VardelleM VardelleA Suspension and solution plasma spraying J Phys D: Appl Phys 2013 46 22 224015 10.1088/0022-3727/46/22/224015 Search in Google Scholar

[4] Tesar T, Musalek R, Lukac F, Medricky J, Cizek J, Rimal V, et al. Increasing α-phase content of alumina-chromia coatings deposited by suspension plasma spraying using hybrid and intermixed concepts. Surface and Coatings Technology. 2019 Aug 15;371:298–311. TesarT MusalekR LukacF MedrickyJ CizekJ RimalV Increasing α-phase content of alumina-chromia coatings deposited by suspension plasma spraying using hybrid and intermixed concepts Surface and Coatings Technology 2019 Aug 15 371 298 311 10.1016/j.surfcoat.2019.04.091 Search in Google Scholar

[5] Steeper TJ, Varacalle DJ, Wilson GC, Riggs WL, Rotolico AJ, Nerz J. A design of experiment study of plasma-sprayed alumina-titania coatings. JTST. 1993 Sep 1;2(3):251–6. SteeperTJ VaracalleDJ WilsonGC RiggsWL RotolicoAJ NerzJ A design of experiment study of plasma-sprayed alumina-titania coatings JTST 1993 Sep 1 2 3 251 6 10.1007/BF02650473 Search in Google Scholar

[6] Alebrahim E, Tarasi F, Rahaman MdS, Dolatabadi A, Moreau C. Fabrication of titanium dioxide filtration membrane using suspension plasma spray process. Surface and Coatings Technology. 2019 Nov 25;378:124927. AlebrahimE TarasiF RahamanMdS DolatabadiA MoreauC Fabrication of titanium dioxide filtration membrane using suspension plasma spray process Surface and Coatings Technology 2019 Nov 25 378 124927 10.1016/j.surfcoat.2019.124927 Search in Google Scholar

[7] Musalek R, Medricky J, Tesar T, Kotlan J, Pala Z, Lukac F, et al. Suspensions plasma spraying of ceramics with hybrid water-stabilized plasma technology. J Therm Spray Tech. 2017 Jan 1;26(1):37–46. MusalekR MedrickyJ TesarT KotlanJ PalaZ LukacF Suspensions plasma spraying of ceramics with hybrid water-stabilized plasma technology J Therm Spray Tech 2017 Jan 1 26 1 37 46 10.1007/s11666-016-0493-6 Search in Google Scholar

[8] Łatka L, Michalak M, Szala M, Walczak M, Sokołowski P, Ambroziak A. Influence of 13 wt% TiO₂ content in alumina-titania powders on microstructure, sliding wear and cavitation erosion resistance of APS sprayed coatings. Surface and Coatings Technology. 2021 Mar 25;410:126979. ŁatkaL MichalakM SzalaM WalczakM SokołowskiP AmbroziakA Influence of 13 wt% TiO₂ content in alumina-titania powders on microstructure, sliding wear and cavitation erosion resistance of APS sprayed coatings Surface and Coatings Technology 2021 Mar 25 410 126979 10.1016/j.surfcoat.2021.126979 Search in Google Scholar

[9] Klyatskina E, Espinosa-Fernández L, Darut G, Segovia F, Salvador MD, Montavon G, et al. Sliding wear behavior of Al₂O₃–TiO₂ coatings fabricated by the Suspension Plasma Spraying Technique. Tribol Lett. 2015 Jul 1;59(1):8. KlyatskinaE Espinosa-FernándezL DarutG SegoviaF SalvadorMD MontavonG Sliding wear behavior of Al₂O₃–TiO₂ coatings fabricated by the Suspension Plasma Spraying Technique Tribol Lett 2015 Jul 1 59 1 8 10.1007/s11249-015-0530-5 Search in Google Scholar

[10] Łatka L, Szala M, Macek W, Branco R. Mechanical properties and sliding wear resistance of Suspension Plasma Sprayed YSZ coatings. Adv Sci Technol Res J. 2020 Dec 1;14(4):307–14. ŁatkaL SzalaM MacekW BrancoR Mechanical properties and sliding wear resistance of Suspension Plasma Sprayed YSZ coatings Adv Sci Technol Res J 2020 Dec 1 14 4 307 14 10.12913/22998624/128574 Search in Google Scholar

[11] Mahade S, Mulone A, Björklund S, Klement U, Joshi S. Incorporation of graphene nano platelets in suspension plasma sprayed alumina coatings for improved tribological properties. Applied Surface Science. 2021 Dec 30;570:151227. MahadeS MuloneA BjörklundS KlementU JoshiS Incorporation of graphene nano platelets in suspension plasma sprayed alumina coatings for improved tribological properties Applied Surface Science 2021 Dec 30 570 151227 10.1016/j.apsusc.2021.151227 Search in Google Scholar

[12] Mukherjee B, Asiq Rahman OS, Islam A, Sribalaji M, Keshri AK. Plasma sprayed carbon nanotube and graphene nanoplatelets reinforced alumina hybrid composite coating with outstanding toughness. Journal of Alloys and Compounds. 2017 Dec 15;727:658–70. MukherjeeB Asiq RahmanOS IslamA SribalajiM KeshriAK Plasma sprayed carbon nanotube and graphene nanoplatelets reinforced alumina hybrid composite coating with outstanding toughness Journal of Alloys and Compounds 2017 Dec 15 727 658 70 10.1016/j.jallcom.2017.08.160 Search in Google Scholar

[13] Rico A, Rodriguez J, Otero E, Zeng P, Rainforth WM. Wear behaviour of nanostructured alumina–titania coatings deposited by atmospheric plasma spray. Wear. 2009 Jun 15;267(5):1191–7. RicoA RodriguezJ OteroE ZengP RainforthWM Wear behaviour of nanostructured alumina–titania coatings deposited by atmospheric plasma spray Wear 2009 Jun 15 267 5 1191 7 10.1016/j.wear.2009.01.022 Search in Google Scholar

[14] Vicent M, Bannier E, Moreno R, Salvador MD, Sánchez E. Atmospheric plasma spraying coatings from alumina–titania feedstock comprising bimodal particle size distributions. Journal of the European Ceramic Society. 2013 Dec 1;33(15):3313–24. VicentM BannierE MorenoR SalvadorMD SánchezE Atmospheric plasma spraying coatings from alumina–titania feedstock comprising bimodal particle size distributions Journal of the European Ceramic Society 2013 Dec 1 33 15 3313 24 10.1016/j.jeurceramsoc.2013.05.009 Search in Google Scholar

[15] Vicent M, Bannier E, Carpio P, Rayón E, Benavente R, Salvador MD, et al. Effect of the initial particle size distribution on the properties of suspension plasma sprayed Al₂O₃–TiO₂ coatings. Surface and Coatings Technology. 2015 Apr 25;268:209–15. VicentM BannierE CarpioP RayónE BenaventeR SalvadorMD Effect of the initial particle size distribution on the properties of suspension plasma sprayed Al₂O₃–TiO₂ coatings Surface and Coatings Technology 2015 Apr 25 268 209 15 10.1016/j.surfcoat.2014.12.010 Search in Google Scholar

[16] Darut G, Klyatskina E, Valette S, Carles P, Denoirjean A, Montavon G, et al. Architecture and phases composition of suspension plasma sprayed alumina–titania submicrometer-sized coatings. Materials Letters. 2012 Jan 15;67(1):241–4. DarutG KlyatskinaE ValetteS CarlesP DenoirjeanA MontavonG Architecture and phases composition of suspension plasma sprayed alumina–titania submicrometer-sized coatings Materials Letters 2012 Jan 15 67 1 241 4 10.1016/j.matlet.2011.09.096 Search in Google Scholar

[17] Michalak M, Sokołowski P, Szala M, Walczak M, Łatka L, Toma F-L, et al. Wear behavior analysis of Al₂O₃ coatings manufactured by APS and HVOF spraying processes using powder and suspension feedstocks. Coatings. 2021 Aug;11(8):879. MichalakM SokołowskiP SzalaM WalczakM ŁatkaL TomaF-L Wear behavior analysis of Al₂O₃ coatings manufactured by APS and HVOF spraying processes using powder and suspension feedstocks Coatings 2021 Aug 11 8 879 10.3390/coatings11080879 Search in Google Scholar

[18] Michalak M, Toma F-L, Latka L, Sokolowski P, Barbosa M, Ambroziak A. A study on the microstructural characterization and phase compositions of thermally sprayed Al₂O₃-TiO₂ coatings obtained from powders and water-based suspensions. Materials. 2020 Jan;13(11):2638. MichalakM TomaF-L LatkaL SokolowskiP BarbosaM AmbroziakA A study on the microstructural characterization and phase compositions of thermally sprayed Al₂O₃-TiO₂ coatings obtained from powders and water-based suspensions Materials 2020 Jan 13 11 2638 10.3390/ma13112638732157632527061 Search in Google Scholar

[19] Berger L-M, Sempf K, Sohn YJ, Vaßen R. Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al₂O₃-40% TiO₂ coatings. J Therm Spray Tech. 2018 Apr 1;27(4):654–66. BergerL-M SempfK SohnYJ VaßenR Influence of feedstock powder modification by heat treatments on the properties of APS-sprayed Al₂O₃-40% TiO₂ coatings J Therm Spray Tech 2018 Apr 1 27 4 654 66 10.1007/s11666-018-0716-0 Search in Google Scholar

[20] Sarikaya O, Anik S, Aslanlar S, Cem Okumus S, Celik E. Al–Si/B₄C composite coatings on Al–Si substrate by plasma spray technique. Materials & Design. 2007 Jan 1;28(9):2443–9. SarikayaO AnikS AslanlarS Cem OkumusS CelikE Al–Si/B₄C composite coatings on Al–Si substrate by plasma spray technique Materials & Design 2007 Jan 1 28 9 2443 9 10.1016/j.matdes.2006.09.007 Search in Google Scholar

[21] Li N, Li G, Wang H, Kang J, Dong T, Wang H. Influence of TiO₂ content on the mechanical and tribological properties of Cr₂O₃-based coating. Materials & Design. 2015 Dec 25;88:906–14. LiN LiG WangH KangJ DongT WangH Influence of TiO₂ content on the mechanical and tribological properties of Cr₂O₃-based coating Materials & Design 2015 Dec 25 88 906 14 10.1016/j.matdes.2015.09.085 Search in Google Scholar

[22] Ganvir A, Björklund S, Yao Y, V. S. S. Vadali S, Klement U, Joshi S. A facile approach to deposit graphenaceous composite coatings by Suspension Plasma Spraying. Coatings. 2019 Mar;9(3):171. GanvirA BjörklundS YaoY V. S. S. VadaliS KlementU JoshiS A facile approach to deposit graphenaceous composite coatings by Suspension Plasma Spraying Coatings 2019 Mar 9 3 171 10.3390/coatings9030171 Search in Google Scholar

[23] Tian W, Wang Y, Yang Y. Three body abrasive wear characteristics of plasma sprayed conventional and nanostructured Al₂O₃-13%TiO₂ coatings. Tribology International. 2010 May 1;43(5):876–81. TianW WangY YangY Three body abrasive wear characteristics of plasma sprayed conventional and nanostructured Al₂O₃-13%TiO₂ coatings Tribology International 2010 May 1 43 5 876 81 10.1016/j.triboint.2009.12.023 Search in Google Scholar

[24] Winnicki M. Advanced Functional metal-ceramic and ceramic coatings deposited by low-pressure cold spraying: a review. Coatings. 2021 Sep;11(9):1044. WinnickiM Advanced Functional metal-ceramic and ceramic coatings deposited by low-pressure cold spraying: a review Coatings 2021 Sep 11 9 1044 10.3390/coatings11091044 Search in Google Scholar

[25] Ortiz CH, Hernandez-Rengifo E, Guerrero A, Aperador W, Caicedo JC. Mechanical and tribological properties evolution of [Si₃N₄/Al₂O₃]_n multilayer coatings. Tribol Ind. 2021 Mar 15;43(1):23–39. OrtizCH Hernandez-RengifoE GuerreroA AperadorW CaicedoJC Mechanical and tribological properties evolution of [Si₃N₄/Al₂O₃]_n multilayer coatings Tribol Ind 2021 Mar 15 43 1 23 39 10.24874/ti.952.08.20.01 Search in Google Scholar

[26] Björklund S, Goel S, Joshi S. Function-dependent coating architectures by hybrid powder-suspension plasma spraying: Injector design, processing and concept validation. Materials & Design. 2018 Mar 15;142:56–65. BjörklundS GoelS JoshiS Function-dependent coating architectures by hybrid powder-suspension plasma spraying: Injector design, processing and concept validation Materials & Design 2018 Mar 15 142 56 65 10.1016/j.matdes.2018.01.002 Search in Google Scholar

[27] Murray JW, Leva A, Joshi S, Hussain T. Microstructure and wear behaviour of powder and suspension hybrid Al₂O₃–YSZ coatings. Ceramics International. 2018 May 1;44(7):8498–504. MurrayJW LevaA JoshiS HussainT Microstructure and wear behaviour of powder and suspension hybrid Al₂O₃–YSZ coatings Ceramics International 2018 May 1 44 7 8498 504 10.1016/j.ceramint.2018.02.048 Search in Google Scholar

[28] Kiilakoski J, Puranen J, Heinonen E, Koivuluoto H, Vuoristo P. Characterization of powder-precursor HVOF-sprayed Al₂O₃-YSZ/ZrO₂ coatings. J Therm Spray Tech. 2019 Jan 1;28(1):98–107. KiilakoskiJ PuranenJ HeinonenE KoivuluotoH VuoristoP Characterization of powder-precursor HVOF-sprayed Al₂O₃-YSZ/ZrO₂ coatings J Therm Spray Tech 2019 Jan 1 28 1 98 107 10.1007/s11666-018-0816-x Search in Google Scholar

[29] Sadeghi E, Markocsan N, Joshi S. Advances in corrosion-resistant thermal spray coatings for renewable energy power plants. Part I: effect of composition and microstructure. J Therm Spray Tech. 2019 Dec 1;28(8):1749–88. SadeghiE MarkocsanN JoshiS Advances in corrosion-resistant thermal spray coatings for renewable energy power plants. Part I: effect of composition and microstructure J Therm Spray Tech 2019 Dec 1 28 8 1749 88 10.1007/s11666-019-00938-1 Search in Google Scholar

[30] Darut G, Klyatskina E, Valette S, Carles P, Denoirjean A, Montavon G, et al. Architecture and phases composition of suspension plasma sprayed alumina–titania submicrometer-sized coatings. Materials Letters. 2012 Jan 15;67(1):241–4. DarutG KlyatskinaE ValetteS CarlesP DenoirjeanA MontavonG Architecture and phases composition of suspension plasma sprayed alumina–titania submicrometer-sized coatings Materials Letters 2012 Jan 15 67 1 241 4 10.1016/j.matlet.2011.09.096 Search in Google Scholar

[31] Sánchez E, Moreno A, Vicent M, Salvador MD, Bonache V, Klyatskina E, et al. Preparation and spray drying of Al₂O₃–TiO₂ nanoparticle suspensions to obtain nanostructured coatings by APS. Surface and Coatings Technology. 2010 Nov 15;205(4):987–92. SánchezE MorenoA VicentM SalvadorMD BonacheV KlyatskinaE Preparation and spray drying of Al₂O₃–TiO₂ nanoparticle suspensions to obtain nanostructured coatings by APS Surface and Coatings Technology 2010 Nov 15 205 4 987 92 10.1016/j.surfcoat.2010.06.002 Search in Google Scholar

[32] Toma F-L, Potthoff A, Berger L-M, Leyens C. Demands, potentials, and economic aspects of thermal spraying with suspensions: a critical review. J Therm Spray Tech. 2015 Oct 1;24(7):1143–52. TomaF-L PotthoffA BergerL-M LeyensC Demands, potentials, and economic aspects of thermal spraying with suspensions: a critical review J Therm Spray Tech 2015 Oct 1 24 7 1143 52 10.1007/s11666-015-0274-7 Search in Google Scholar

[33] Tesar T, Musalek R, Medricky J, Kotlan J, Lukac F, Pala Z, et al. Development of suspension plasma sprayed alumina coatings with high enthalpy plasma torch. Surface and Coatings Technology. 2017 Sep 25;325:277–88. TesarT MusalekR MedrickyJ KotlanJ LukacF PalaZ Development of suspension plasma sprayed alumina coatings with high enthalpy plasma torch Surface and Coatings Technology 2017 Sep 25 325 277 88 10.1016/j.surfcoat.2017.06.039 Search in Google Scholar

[34] Huan Y, Wu K, Li C, Liao H, Debliquy M, Zhang C. Micro-nano structured functional coatings deposited by liquid plasma spraying. J Adv Ceram. 2020 Oct 1;9(5):517–34. HuanY WuK LiC LiaoH DebliquyM ZhangC Micro-nano structured functional coatings deposited by liquid plasma spraying J Adv Ceram 2020 Oct 1 9 5 517 34 10.1007/s40145-020-0402-9 Search in Google Scholar

[35] Goel S, Björklund S, Curry N, Govindarajan S, Wiklund U, Gaudiuso C, et al. Axial Plasma Spraying of mixed suspensions: a case study on processing, characteristics, and tribological behavior of Al₂O₃-YSZ coatings. Applied Sciences. 2020 Jan;10(15):5140. GoelS BjörklundS CurryN GovindarajanS WiklundU GaudiusoC Axial Plasma Spraying of mixed suspensions: a case study on processing, characteristics, and tribological behavior of Al₂O₃-YSZ coatings Applied Sciences 2020 Jan 10 15 5140 10.3390/app10155140 Search in Google Scholar

[36] Chidambaram Seshadri R, Sampath S. Characteristics of conventional and cascaded arc plasma spray-deposited ceramic under standard and high-throughput conditions. J Therm Spray Tech. 2019 Apr 1;28(4):690–705. Chidambaram SeshadriR SampathS Characteristics of conventional and cascaded arc plasma spray-deposited ceramic under standard and high-throughput conditions J Therm Spray Tech 2019 Apr 1 28 4 690 705 10.1007/s11666-019-00841-9 Search in Google Scholar

[37] Sokołowski P, Kozerski S, Pawłowski L, Ambroziak A. The key process parameters influencing formation of columnar microstructure in suspension plasma sprayed zirconia coatings. Surface and Coatings Technology. 2014 Dec 15;260:97–106. SokołowskiP KozerskiS PawłowskiL AmbroziakA The key process parameters influencing formation of columnar microstructure in suspension plasma sprayed zirconia coatings Surface and Coatings Technology 2014 Dec 15 260 97 106 10.1016/j.surfcoat.2014.08.078 Search in Google Scholar

[38] Fazilleau J, Delbos C, Rat V, Coudert JF, Fauchais P, Pateyron B. Phenomena involved in Suspension Plasma Spraying Part 1: suspension injection and behavior. Plasma Chem Plasma Process. 2006 Aug 1;26(4):371–91. FazilleauJ DelbosC RatV CoudertJF FauchaisP PateyronB Phenomena involved in Suspension Plasma Spraying Part 1: suspension injection and behavior Plasma Chem Plasma Process 2006 Aug 1 26 4 371 91 10.1007/s11090-006-9019-1 Search in Google Scholar

[39] Toma F-L, Berger L-M, Stahr CC, Naumann T, Langner S. Microstructures and functional properties of suspension-sprayed Al₂O₃ and TiO₂ coatings: an overview. J Therm Spray Tech. 2010 Jan 1;19(1–2):262–74. TomaF-L BergerL-M StahrCC NaumannT LangnerS Microstructures and functional properties of suspension-sprayed Al₂O₃ and TiO₂ coatings: an overview J Therm Spray Tech 2010 Jan 1 19 1–2 262 74 10.1007/s11666-009-9417-z Search in Google Scholar

[40] Müller P, Killinger A, Gadow R. Comparison between High-Velocity Suspension Flame Spraying and Suspension Plasma Spraying of alumina. J Therm Spray Tech. 2012 Dec 1;21(6):1120–7. MüllerP KillingerA GadowR Comparison between High-Velocity Suspension Flame Spraying and Suspension Plasma Spraying of alumina J Therm Spray Tech 2012 Dec 1 21 6 1120 7 10.1007/s11666-012-9783-9 Search in Google Scholar

[41] Stahr CC, Saaro S, Berger L-M, Dubsky J, Neufuss K, Herrmann M. Dependence of the stabilization of α-alumina on the spray process. Journal of Thermal Spray Technology. 2007;16(5–6):822–30. StahrCC SaaroS BergerL-M DubskyJ NeufussK HerrmannM Dependence of the stabilization of α-alumina on the spray process Journal of Thermal Spray Technology 2007 16 5–6 822 30 10.1007/s11666-007-9107-7 Search in Google Scholar

[42] Chráska P, Dubsky J, Neufuss K, Písacka J. Alumina-base plasma-sprayed materials part I: Phase stability of alumina and alumina-chromia. J Therm Spray Tech. 1997 Sep 1;6(3):320–6. ChráskaP DubskyJ NeufussK PísackaJ Alumina-base plasma-sprayed materials part I: Phase stability of alumina and alumina-chromia J Therm Spray Tech 1997 Sep 1 6 3 320 6 10.1007/s11666-997-0066-9 Search in Google Scholar

[43] Cipri F, Marra F, Pulci G, Tirillò J, Bartuli C, Valente T. Plasma sprayed composite coatings obtained by liquid injection of secondary phases. Surface and Coatings Technology. 2009 May 25;203(15):2116–24. CipriF MarraF PulciG TirillòJ BartuliC ValenteT Plasma sprayed composite coatings obtained by liquid injection of secondary phases Surface and Coatings Technology 2009 May 25 203 15 2116 24 10.1016/j.surfcoat.2008.09.029 Search in Google Scholar

[44] Jiang X-Y, Hu J, Jiang S-L, Wang X, Zhang L-B, Li Q, et al. Effect of high-enthalpy atmospheric plasma spraying parameters on the mechanical and wear resistant properties of alumina ceramic coatings. Surface and Coatings Technology. 2021 Jul 25;418:127193. JiangX-Y HuJ JiangS-L WangX ZhangL-B LiQ Effect of high-enthalpy atmospheric plasma spraying parameters on the mechanical and wear resistant properties of alumina ceramic coatings Surface and Coatings Technology 2021 Jul 25 418 127193 10.1016/j.surfcoat.2021.127193 Search in Google Scholar

[45] Bannier E, Vicent M, Rayón E, Benavente R, Salvador MD, Sánchez E. Effect of TiO₂ addition on the microstructure and nanomechanical properties of Al₂O₃ Suspension Plasma Sprayed coatings. Applied Surface Science. 2014 Oct 15;316:141–6. BannierE VicentM RayónE BenaventeR SalvadorMD SánchezE Effect of TiO₂ addition on the microstructure and nanomechanical properties of Al₂O₃ Suspension Plasma Sprayed coatings Applied Surface Science 2014 Oct 15 316 141 6 10.1016/j.apsusc.2014.07.168 Search in Google Scholar

[46] Dai L, Wang T, Jin B, Liu N, Niu Y, Meng W, et al. γ-Al₂O₃ coating layer confining zinc dendrite growth for high stability aqueous rechargeable zinc-ion batteries. Surface and Coatings Technology. 2021 Dec 15;427:127813. DaiL WangT JinB LiuN NiuY MengW γ-Al₂O₃ coating layer confining zinc dendrite growth for high stability aqueous rechargeable zinc-ion batteries Surface and Coatings Technology 2021 Dec 15 427 127813 10.1016/j.surfcoat.2021.127813 Search in Google Scholar

[47] Lee JG, Jeon OS, Ryu KH, Park MG, Min SH, Hyun SH, et al. Effects of 8 mol% yttria-stabilized zirconia with copper oxide on solid oxide fuel cell performance. Ceramics International. 2015 Jul;41(6):7982–8. LeeJG JeonOS RyuKH ParkMG MinSH HyunSH Effects of 8 mol% yttria-stabilized zirconia with copper oxide on solid oxide fuel cell performance Ceramics International 2015 Jul 41 6 7982 8 10.1016/j.ceramint.2015.02.144 Search in Google Scholar